Recent Advances in Metal Powder-Based Additive Manufacturing

Hong Wu,Yaojia Ren,Yingtao Tian,Alberto Orozco Caballero

DOI: https://doi.org/10.3390/ma16113975

IF: 3.4

2023-01-01

Materials

Abstract:Over the past two decades, laser additive manufacturing technology has evolved rapidly and has been applied in many industrial sectors [...]

What problem does this paper attempt to address?

Metal Powder and Wire Additive Manufacturing Technology

Yan Liu,Anna Du,Guishen Zhou,Jiapeng Liu

DOI: https://doi.org/10.1051/e3sconf/202021301020

2020-01-01

E3S Web of Conferences

Abstract:Additive manufacturing technology can quickly manufacture parts with dense microstructures and excellent mechanical properties, so that it shows a broad application prospect in aerospace and other fields. Additive manufacturing technology was briefly introduced in this paper. On this basis, the technology and characteristics of metal powder and wire additive manufacturing were systematically analyzed and compared, and the development of additive manufacturing technology was prospected.
Recent Progress in Additive Manufacturing of Alloys and Composites

Feiyang Gao,Haizhou Lu,Chao Zhao,Haokai Dong,Lehua Liu

DOI: https://doi.org/10.3390/ma17122905

IF: 3.4

2024-06-14

Materials

Abstract:Additive manufacturing, commonly referred to as 3D printing, is a fabrication method characterized by a layer-by-layer deposition process [...]

materials science, multidisciplinary,metallurgy & metallurgical engineering,physics, applied,chemistry, physical, condensed matter
Recent progress and scientific challenges in multi-material additive manufacturing via laser-based powder bed fusion

Chao Wei,Lin Li

DOI: https://doi.org/10.1080/17452759.2021.1928520

IF: 10.6

2021-05-04

Virtual and Physical Prototyping

Abstract:<span>Multi-material additive manufacturing provides a new route for fabricating components with tailored physical properties. Laser-based powder bed fusion (L-PBF), also known as selective laser melting, is a powder bed-based additive manufacturing technology. This technology affords the advantage of manufacturing metallic and non-metallic materials with high geometrical resolution. An emerging field relevant to the foregoing is multi-material L-PBF. This paper reviews the latest progress in this field including multiple material powder deposition mechanisms, molten pool behaviour, process characteristics of printing metal–metal, metal–ceramic, and metal–polymer multiple material components, and potential applications. Finally, scientific and technological challenges are presented.</span>

engineering, manufacturing,materials science, multidisciplinary
Advances in Additive Manufacturing and Their Applications

Petru Berce

DOI: https://doi.org/10.3390/met14020165

IF: 2.695

2024-01-30

Metals

Abstract:first_page Download PDF settings Order Article Reprints Font Type: Arial Georgia Verdana Font Size: Aa Aa Aa Line Spacing:    Column Width:    Background: Open Access Editorial Advances in Additive Manufacturing and Their Applications by Petru Berce Petru Berce Scilit Preprints.org Google Scholar View Publications Manufacturing Engineering Department, Technical University of Cluj Napoca, 400641 Cluj-Napoca, Romania Metals 2024 , 14 (2), 165; https://doi.org/10.3390/met14020165 (registering DOI) Submission received: 12 January 2024 / Accepted: 24 January 2024 / Published: 29 January 2024 (This article belongs to the Special Issue Advances in Additive Manufacturing and Their Applications) Download keyboard_arrow_down Download PDF Download XML Versions Notes 1. Introduction and Scope Additive manufacturing (AM) has evolved rapidly in the last few years. It has been embraced by major industrial companies looking for ways to improve their products. The ability to deliver near-instant part production and fully custom designs that cannot be replicated with other manufacturing techniques has accelerated investment and research in additive manufacturing.A number of different metals are now available in powdered form to suit exact processes and requirements. Stainless steel and titanium metal and its alloys are materials of interest in the fields of biomedicine [1], aerospace [2], and defense [3] and the automobile industry [4]. Other materials such as aluminum alloys [5], copper [6], and cobalt chrome, in addition to precious metals such as gold, platinum, palladium, and silver [7], are available in powdered form as raw materials in AM technologies. Many studies in this field have been and are oriented toward the following: (a) Structural optimization for AM is and will remain a hot and attractive issue. Moreover, further studies need to be carried out to optimize and design practical industrial structures [8,9]; (b) The interaction between building orientation and heat treatment may change the strength–stiffness behavior of steel manufactured by means of powder bed fusion (PBF) [10]; (c) Supports are optimized with respect to two different physical properties. First, they must support the overhanging regions of the structure to improve the stiffness of the supported structure during the building process. Second, support can help in channeling the heat flux produced by the source term (typically a laser beam), thus improving the cooling down of the structure during the fabrication process [11]. This Special Issue aims to present the latest developments in additive manufacturing processes, optimizations, new additive processes, rapid tooling, and applications from industry using metal powders as raw materials. 2. Contributions This Special Issue contains a total of 10 articles covering the main topics in this field.The goal of the study by Ayub H. et al. (Contribution 1) was to increase the laser power absorption capacity of copper powder through the inclusion of carbon nanotubes (CNTs), up to a maximum of 0.6 wt.%. The optical properties of the CNTs mixed with copper powder were examined through spectroscopy, which revealed that the IR laser reflectance of the copper powder was reduced by 8%. The results demonstrated that the addition of CNTs improved the sintering behavior and refined the grain structure, leading to an increase in strength and flexibility. The SEM analysis revealed that lower concentrations of CNTs and higher levels of laser power could cause residual porosity, while higher CNT concentrations and slower scan speeds led to better parti -Abstract Truncated-

materials science, multidisciplinary,metallurgy & metallurgical engineering
Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments

S. L. Sing,W. Y. Yeong

DOI: https://doi.org/10.1080/17452759.2020.1779999

IF: 10.6

2020-06-25

Virtual and Physical Prototyping

Abstract:While significant progress has been made in laser powder bed fusion (L-PBF) for metal additive manufacturing (AM), there is still limited large scale adoption of this advanced manufacturing technique by the industry. This paper covers the recent developments in L-PBF with discussions from the materials and process perspectives. High entropy alloys and high strength aluminium alloys have been identified as key materials development for L-PBF. Then, scanning strategies and multi-lasers applications for the process are also discussed. Other research trends and topics such as powder recycling, shape memory alloys and magnetic alloys are illustrated. The final part of this paper provides an outlook on the recent advancements while suggesting potential research topics for L-PBF.

engineering, manufacturing,materials science, multidisciplinary
Metal powder as feedstock for laser-based additive manufacturing: From production to powder modification

Laura E. T. Mathias,Vitor E. Pinotti,Bruna F. Batistão,Nicolas Rojas-Arias,Gustavo Figueira,Angelo F. Andreoli,Piter Gargarella

DOI: https://doi.org/10.1557/s43578-023-01271-8

IF: 2.7

2023-12-29

Journal of Materials Research

Abstract:Abstract Laser powder bed fusion (L-PBF) and direct laser deposition (DLD) are the two main processes currently used in the additive manufacturing (AM) of metals. For both methods, metal powders are used as feedstock, and they must present specific physical and chemical properties to ensure optimal processing and reliable and reproducible printing results. Particle morphology, size distribution, and flowability, among other factors, depend on the powder production process and directly influence the processing parameters and physical characteristics of the parts built by AM. This systematic review presents different concepts involving L-PBF and DLD manufacturing and the application of metal powders. The methods used to produce and characterize metal powders and the modification techniques to improve their processability by AM are detailed and discussed. Environmental and health risks are also presented, and safety measures that must be considered while handling metal powders. Some key topics requiring attention for further development are highlighted. Graphical abstract

materials science, multidisciplinary
High Absorptivity Nanotextured Powders for Additive Manufacturing

Ottman A. Tertuliano,Philip J. DePond,Andrew C. Lee,Jiho Hong,David Doan,Luc Capaldi,Mark Brongersma,X. Wendy Gu,Manyalibo J. Matthews,Wei Cai,Adrian J. Lew

2023-12-09

Abstract:The widespread application of metal additive manufacturing (AM) is limited by the ability to control the complex interactions between the energy source and the feedstock material. Here we develop a generalizable process to introduce nanoscale grooves to the surface of metal powders which increases the powder absorptivity by up to 70% during laser powder bed fusion. Absorptivity enhancements in copper, copper-silver, and tungsten enables energy efficient manufacturing, with printing of pure copper at relative densities up to 92% using laser energy densities as low as 82 J/mm^3. Simulations show the enhanced powder absorptivity results from plasmon-enabled light concentration in nanoscale grooves combined with multiple scattering events. The approach taken here demonstrates a general method to enhance the absorptivity and printability of reflective and refractory metal powders by changing the surface morphology of the feedstock without altering its composition.

Optics,Materials Science
A Review of Non-Powder-Bed Metal Additive Manufacturing: Techniques and Challenges

Jie Xu,Yifan Fei,Yuanzhe Zhu,Wei Yu,Donggang Yao,Jack G. Zhou

DOI: https://doi.org/10.3390/ma17194717

IF: 3.4

2024-09-26

Materials

Abstract:Metal additive manufacturing has significantly evolved since the 1990s, achieving a market valuation of USD 6.36 billion in 2022, with an anticipated compound annual growth rate of 24.2% from 2023 to 2030. While powder-bed-based methods like powder bed fusion and binder jetting dominate the market due to their high accuracy and resolution, they face challenges such as lengthy build times, excessive costs, and safety concerns. Non-powder-bed-based techniques, including direct energy deposition, material extrusion, and sheet lamination, offer advantages such as larger build sizes and lower energy consumption but also encounter issues like residual stress and poor surface finish. The existing reviews of non-powder-bed-based metal additive manufacturing are restricted to one technical branch or one specific material. This survey investigates and analyzes each non-powder-bed-based technique in terms of its manufacturing method, materials, product quality, and summary for easy understanding and comparison. Innovative designs and research status are included.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Advancements in Metal Processing Additive Technologies: Selective Laser Melting (SLM)

Neetesh Soni,Gilda Renna,Paola Leo

DOI: https://doi.org/10.3390/met14091081

IF: 2.695

2024-09-22

Metals

Abstract:Nowadays, the use of metal processing additive technologies is a rapidly growing field in the manufacturing industry. These technologies, such as metal 3D printing (also known as additive manufacturing) and laser cladding, allow for the production of complex geometries and intricate designs that would be impossible with traditional manufacturing methods. They also offer the ability to create parts with customized properties, such as improved strength, wear resistance, and corrosion resistance. In other words, these technologies have the potential to revolutionize the way we design and produce products, reducing costs and increasing efficiency to improve product quality and functionality. One of the significant advantages of these metal processing additive technologies is a reduction in waste and environmental impact. However, there are also some challenges associated with these technologies. One of the main challenges is the cost of equipment and materials, which can be prohibitively expensive for small businesses and individuals. Additionally, the quality of parts produced with these technologies can be affected by factors such as printing speed, temperature, and post-processing methods. This review article aims to contribute to a deep understanding of the processing, properties, and applications of ferrous and non-ferrous alloys in the context of SLM to assist readers in obtaining high-quality AM components. Simultaneously, it emphasizes the importance of further research, optimization, and cost-effective approaches to promote the broader adoption of SLM technology in the industry.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Additive manufacturing and foundry innovation

Yu-sheng Shi,Jin-liang Zhang,Shi-feng Wen,Bo Song,Chun-ze Yan,Qing-song Wei,Jia-min Wu,Ya-jun Yin,Jian-xin Zhou,Rui Chen,Wei Zhou,He-ping Jia,Huan-qing Yang,Hai Nan

DOI: https://doi.org/10.1007/s41230-021-1008-8

2021-07-01

China Foundry

Abstract:Additive manufacturing is expected to transform and upgrade the traditional foundry industry to realize the integrated manufacturing and rapid and low-cost development of high-performance components with complex shapes. The additive manufacturing technology commonly applied in casting mold preparation (fusible molds, sand molds/cores and ceramic cores) mainly includes selective laser sintering (SLS) and binder injection three-dimensional printing (3DP). In this work, the research status of SLS/3DP-casting processes on material preparation, equipment development, process optimization, simulation and application cases in aerospace, automotive and other fields were elaborated. Finally, the developing trends of the additive manufacturing technology in the future of foundry field are introduced, including multi-material sand molds (metal core included), ceramic core-shell integration and die-casting dies with conformal cooling runners.

metallurgy & metallurgical engineering
Research Progress and Current Situation of Laser Additive Technology

Xiuhu Wang

DOI: https://doi.org/10.54097/ajst.v2i1.984

2022-07-21

Academic Journal of Science and Technology

Abstract:Laser additive technology additive manufacturing is a manufacturing method that realizes the combination of precise "shape control" of complex structure and high-performance "controllability". After rapid solidification, it forms a surface coating or matrix structure with very low dilution. Such surface coating or structure can effectively combine metallurgical technology, and can improve the wear resistance, corrosion resistance, heat resistance, oxidation resistance and other properties of the surface of the matrix material, or in manufacturing. At present, laser additive manufacturing is widely used in aerospace and military industry for rapid repair and performance enhancement of parts. In terms of metals, selective laser melting (SLM) and laser melting deposition (LCD) processes are mainly represented.
Powder-based laser hybrid additive manufacturing of metals: a review

Amaia Jiménez,Prveen Bidare,Hany Hassanin,Faris Tarlochan,Stefan Dimov,Khamis Essa

DOI: https://doi.org/10.1007/s00170-021-06855-4

IF: 3.563

2021-03-19

The International Journal of Advanced Manufacturing Technology

Abstract:Abstract Recent advances in additive manufacturing (AM) have attracted significant industrial interest. Initially, AM was mainly associated with the fabrication of prototypes, but the AM advances together with the broadening range of available materials, especially for producing metallic parts, have broaden the application areas and now the technology can be used for manufacturing functional parts, too. Especially, the AM technologies enable the creation of complex and topologically optimised geometries with internal cavities that were impossible to produce with traditional manufacturing processes. However, the tight geometrical tolerances along with the strict surface integrity requirements in aerospace, biomedical and automotive industries are not achievable in most cases with standalone AM technologies. Therefore, AM parts need extensive post-processing to ensure that their surface and dimensional requirements together with their respective mechanical properties are met. In this context, it is not surprising that the integration of AM with post-processing technologies into single and multi set-up processing solutions, commonly referred to as hybrid AM, has emerged as a very attractive proposition for industry while attracting a significant R&D interest. This paper reviews the current research and technology advances associated with the hybrid AM solutions. The special focus is on hybrid AM solutions that combine the capabilities of laser-based AM for processing powders with the necessary post-process technologies for producing metal parts with required accuracy, surface integrity and material properties. Commercially available hybrid AM systems that integrate laser-based AM with post-processing technologies are also reviewed together with their key application areas. Finally, the main challenges and open issues in broadening the industrial use of hybrid AM solutions are discussed.
The Metallurgy of Additive Manufacturing: Potentials and Challenges towards Industrialisation

P Mayr,S Rauh,G Matheson,S Rotzsche,S Hartmann,E Kabliman

DOI: https://doi.org/10.1088/1757-899x/1310/1/012009

2024-08-14

IOP Conference Series Materials Science and Engineering

Abstract:The present paper discusses the potential and challenges of processing metallic materials using additive manufacturing. Particular focus is given to laser powder bed fusion (PBF-LB/M) and the use of traditional alloy powders such as Al alloys and Ni-based superalloys, as well as novel materials such as metal-matrix composites. The research includes the improvement of the processability of these alloys using PBF-LB/M and optimizing material properties such as strength, creep resistance, and thermal conductivity of printed parts for various applications. Another important aspect presented within this manuscript is the digital representation of advanced manufacturing systems to improve manufacturability and enable advanced quality control. Herein, the development of a digital twin through in-situ process monitoring for the direct energy deposition process of laser metal deposition is presented. In the last part, the future of materials development for additive manufacturing is discussed, focusing on applying material computational techniques. All demonstrated examples result from the successful cooperation between the Chair of Materials Engineering of Additive Manufacturing, TUM, and its industrial and research partners.
Recent Advancements in Hybrid Additive Manufacturing of Similar and Dissimilar Metals via Laser Powder Bed Fusion

Ibrahim H. ZainElabdeen,Linda Ismail,Omer F. Mohamed,Kamran A. Khan,Andreas Schiffer

DOI: https://doi.org/10.1016/j.msea.2024.146833

2024-06-17

Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

Abstract:Additive Manufacturing (AM) is a transformative technology that facilitates the production of intricate geometries with high precision, customization, and speed. While conventional AM processes for metallic components have traditionally involved single materials, there is a growing demand for hybrid components made from two or more metals. This paper comprehensively reviews the state-of-the-art in multi-material AM for metallic parts using Laser Powder Bed Fusion (LPBF). It delves into an in-depth analysis of the interface characteristics and properties of bimetallic LPBF parts, offering valuable insights into the complex process-structure-property relations involved in joining similar and dissimilar metals. Research on similar hybrid metals has emphasized the significant potential of this method for efficiently producing robust joints across various classes of ferrous and non-ferrous metals. Moreover, the article addresses the inherent challenges in hybrid 3D printing of dissimilar metals, including substantial differences in physical and chemical properties, the formation of detrimental intermetallic compounds, and element segregation. In response to these obstacles, the study thoroughly explores various strategies proposed in the literature, such as adjusting process parameters, integrating an interlayer of a third material, and utilizing machine learning algorithms. Additionally, it outlines the applications and future directions in AM of hybrid LPBF structures, providing a complete roadmap for potential research in this rapidly evolving field.
Recent progress on the additive manufacturing of aluminum alloys and aluminum matrix composites: Microstructure, properties, and applications

Zhiguang Zhu,Zhiheng Hu,Hang Li Seet,Tingting Liu,Wenhe Liao,Upadrasta Ramamurty,Sharon Mui Ling Nai

DOI: https://doi.org/10.1016/j.ijmachtools.2023.104047

IF: 10.331

2023-06-06

International Journal of Machine Tools and Manufacture

Abstract:Whilst the adoption of additive manufacturing (AM) of aluminum alloys is relatively slower compared with that of steels and titanium alloys, it has undergone a flourishing trend in the past 15 years. Significant progress, such as the development of novel processes, novel alloys, novel heat treatment profiles, and applications, has been made through the combined efforts from academic and industry fields. This state-of-the art review presents a detailed overview of the process technology, microstructure, and properties of different aluminum alloys and aluminum matrix composites fabricated using various additive manufacturing technologies, including laser powder bed fusion, electron beam powder bed fusion, laser powder direct energy deposition, wire arc additive manufacturing, binder jetting, and additive friction stir deposition. The pros and cons of each technology in fabricating aluminum alloys are evaluated. As the dominant additive manufacturing technology for aluminum alloys, an emphasis is put on the laser powder bed fusion technology by reviewing the effect of various factors, such as post-heat treatment, powder feedstock, oxidation, and element evaporation, on the microstructure and properties. We close the review with the outlook listing the remaining challenges associated with additive manufacturing of aluminum alloys.

engineering, mechanical, manufacturing
Metal Powder for AM (Additive Manufacturing) and Manufacturing Processes

Hajime NAKADATE,Yoshinobu TAKEDA

DOI: https://doi.org/10.2497/jjspm.66.539

2019-11-15

Journal of the Japan Society of Powder and Powder Metallurgy

Abstract:Recently AM became one of the most revolutionary metal forming technologies in certain market fields in the world. Powder makers focus on supplying powder suitable for this new market. Big users and AM machine makers tend to acquire powder makers in order to secure the performance, quality and economics of their products. Often times, users of AM machines and AM machine makers are not familiar with metal powder manufacturing technology, because metal powders are made primarily for PM (Powder Metallurgy) or surface coating.This review intends to summarize the demands of metal powder for AM industry and various metal powder manufacturing technologies for it. AM methods require powder with different characteristics, as melting together and solidifying are totally different from solid state sintering and AM does not need conventional compactibility of powder at all. On top of it, handling of metal powder before printing or jetting is the new demands.Various Metal powder manufacturing technologies have been developed and some of them are commercially used for PM and surface coating. Depending on AM method and material. the optimum metal powder manufacturing technology should be chosen. The authors show typical grades suitable to each printing method and material.
Recent Progress in Beam-Based Metal Additive Manufacturing from a Materials Perspective: A Review of Patents

Alberta Aversa,Abdollah Saboori,Giulio Marchese,Luca Iuliano,Mariangela Lombardi,Paolo Fino

DOI: https://doi.org/10.1007/s11665-021-06273-3

IF: 2.3

2021-10-15

Journal of Materials Engineering and Performance

Abstract:Abstract Over the last decade, the enormous potential of metal additive manufacturing (AM) processes has led these technologies to establish their position in many industries. Much effort is being made toward their widespread application; however, much remains to be done to achieve full industrialization of these processes. Therefore, many companies, research centers and universities are investing in comprehensive research and development activities in order to further promote the industrialization of metal AM. This review traces the progress of metal AM technologies through an investigation of patents. In the present study, beam-based metal AM patents were searched through the Orbit Intelligence database. First, the number of patents per year was studied, indicating that, as expected, there is strong growth in AM patenting activities. The patents were afterward examined in order to highlight the key players in the field, and it was found that the main players investing in this market are: multidisciplinary companies, AM machine producers, end users working, especially in the aerospace sector, universities and research centers. The patents were then analyzed to understand the technology domains covered by each key player and their trend of investments. Finally, the patents in the field of Materials and Metallurgy were studied individually to identify the main topics faced by the most used alloy classes: Al-, Ni- and Ti-based alloys and steels. The extensive study of these patents clearly indicated that the main gaps to fill in metal AM are strongly material dependent and that it is possible to find correlations between the alloy classes, their main industrial applications and their specific AM processability issues. The current study provides insights into global trends that can help industrial markets to identify the right investment direction and research to identify topics for future investigation.

materials science, multidisciplinary
Dynamics of pore formation during laser powder bed fusion additive manufacturing

Aiden A. Martin,Nicholas P. Calta,Saad A. Khairallah,Jenny Wang,Phillip J. Depond,Anthony Y. Fong,Vivek Thampy,Gabe M. Guss,Andrew M. Kiss,Kevin H. Stone,Christopher J. Tassone,Johanna Nelson Weker,Michael F. Toney,Tony van Buuren,Manyalibo J. Matthews

DOI: https://doi.org/10.1038/s41467-019-10009-2

IF: 16.6

2019-04-30

Nature Communications

Abstract:Laser powder bed fusion additive manufacturing is an emerging 3D printing technique for the fabrication of advanced metal components. Widespread adoption of it and similar additive technologies is hampered by poor understanding of laser-metal interactions under such extreme thermal regimes. Here, we elucidate the mechanism of pore formation and liquid-solid interface dynamics during typical laser powder bed fusion conditions using in situ X-ray imaging and multi-physics simulations. Pores are revealed to form during changes in laser scan velocity due to the rapid formation then collapse of deep keyhole depressions in the surface which traps inert shielding gas in the solidifying metal. We develop a universal mitigation strategy which eliminates this pore formation process and improves the geometric quality of melt tracks. Our results provide insight into the physics of laser-metal interaction and demonstrate the potential for science-based approaches to improve confidence in components produced by laser powder bed fusion.

multidisciplinary sciences
Recent progress on additive manufacturing of multi-material structures with laser powder bed fusion

Di Wang,Linqing Liu,Guowei Deng,Cheng Deng,Yuchao Bai,Yongqiang Yang,Weihui Wu,Jie Chen,Yang Liu,Yonggang Wang,Xin Lin,Changjun Han

DOI: https://doi.org/10.1080/17452759.2022.2028343

IF: 10.6

2022-02-03

Virtual and Physical Prototyping

Abstract:Laser powder bed fusion (LPBF) additive manufacturing has been advancing in the fabrication of metallic multi-material structures with intricate structures and refined material layouts. Herein, a comprehensive review of the recent achievements of multi-material structures via LPBF is provided in terms of interface characteristics and strengthening methods, critical technical issues and potential applications. It begins with the introduction of multi-material structures and the scope of the review. The interface characteristics (including representative multi-material types printed by LPBF, interfacial microstructure, defects, etc.) and strengthening methods of multi-material structures are then presented. Thereafter, the critical technical issues in LPBF for multi-material structures are discussed with regard to equipment development, data preparation, thermodynamic calculation and process simulation, and powder cross-contamination and recycling. Moreover, the potential applications (particularly in biomedical, electronic, aerospace) are illustrated and discussed. Finally, the outlook is outlined to provide guidance for future research.

engineering, manufacturing,materials science, multidisciplinary
Metal additive manufacturing: Technology, metallurgy and modelling

Shaun Cooke,Keivan Ahmadi,Stephanie Willerth,Rodney Herring

DOI: https://doi.org/10.1016/j.jmapro.2020.07.025

IF: 5.684

2020-09-01

Journal of Manufacturing Processes

Abstract:This paper provides a comprehensive review of metal additive manufacturing, a rapidly evolving field with innovative technologies and processes. The purpose of this review paper is to provide a complete picture of the current research on metal AM and its capabilities. An overview of metal AM and the current processing methods are provided, along with a brief introduction to the complex physics behind the melt pool formation. Common metal AM characteristic defects are discussed as well as the current metals and alloys that are commercially available. Furthermore, process optimization techniques and computational modelling methods are reviewed. Lastly, various post-processing methods to improve surface roughness, mechanical properties and dimensional precision are discussed. Although the library for printable alloys is increasing, there is still a need for alloy development outside of the commercial setting. Furthermore, there is currently not a complete numerical model of the AM process which is mainly due to the computational costs. Although metal AM is still in its infancy, the frequency and significance of new developments are driving AM to mainstream adoption.

engineering, manufacturing

Recent Advances in Metal Powder-Based Additive Manufacturing

Metal Powder and Wire Additive Manufacturing Technology

Recent Progress in Additive Manufacturing of Alloys and Composites

Recent progress and scientific challenges in multi-material additive manufacturing via laser-based powder bed fusion

Advances in Additive Manufacturing and Their Applications

Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments

Metal powder as feedstock for laser-based additive manufacturing: From production to powder modification

High Absorptivity Nanotextured Powders for Additive Manufacturing

A Review of Non-Powder-Bed Metal Additive Manufacturing: Techniques and Challenges

Advancements in Metal Processing Additive Technologies: Selective Laser Melting (SLM)

Additive manufacturing and foundry innovation

Research Progress and Current Situation of Laser Additive Technology

Powder-based laser hybrid additive manufacturing of metals: a review

The Metallurgy of Additive Manufacturing: Potentials and Challenges towards Industrialisation

Recent Advancements in Hybrid Additive Manufacturing of Similar and Dissimilar Metals via Laser Powder Bed Fusion

Recent progress on the additive manufacturing of aluminum alloys and aluminum matrix composites: Microstructure, properties, and applications

Metal Powder for AM (Additive Manufacturing) and Manufacturing Processes

Recent Progress in Beam-Based Metal Additive Manufacturing from a Materials Perspective: A Review of Patents

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Recent progress on additive manufacturing of multi-material structures with laser powder bed fusion

Metal additive manufacturing: Technology, metallurgy and modelling