Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Characterisation of Impact Resistance of Composite Reinforced by Hybridised Carbon-Flax Fibres in Polyfurfuryl Alcohol Resin

Bio-resourced furan resin as a sustainable alternative to petroleum-based phenolic resin for making GFR polymer composites

Static and Impact Properties of Flax-Reinforced Polymers Prepared with Conventional Epoxy and Sustainable Resins

Effect of Volume Ratio and Hybrid Mode on Low-Velocity Impact Properties of Unidirectional Flax/carbon Fiber Hybrid Reinforced Polymer Composites

Mechanical, Low-Velocity Impact, and Hydrothermal Aging Properties of Flax/carbon Hybrid Composite Plates

Low‐velocity impact properties of carbon fiber/ultrahigh molecular weight polyethylene fiber hybrid composites

Investigations on the development of impact-resistant thermoplastic fibre hybrid composites from glass and steel fibre

Synergistic reinforcing effect of fly ash and powdered wood chips on the properties of polypropylene hybrid composites

Biomass-derived polyphosphazene toward simultaneously enhancing the flame retardancy and mechanical properties of epoxy resins

Enhancing the fire-resistance performance of composite laminates via multi-scale hybridisation: A review

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Impact Response of Hybrid Carbon/glass Fibre Reinforced Polymer Composites Designed for Engineering Applications

Carbon fiber reinforced modified bisphenol-a diglycidylether epoxy composites for flame retardant applications

Effect of Fiber Hybridization on Mechanical Performances and Impact Behaviors of Basalt Fiber/uhmwpe Fiber Reinforced Epoxy Composites

Fully bio‐based flax/furan versus carbon/glass epoxy composites: Scope and limitations in terms of fire and physico‐mechanical performances

High velocity impact, Flexural and Dynamic Mechanical Properties of Flax/Carbon/Kevlar Reinforced Bio-Phenolic/Epoxy Composites

Interface Strengthening for Carbon Fiber-Reinforced Poly(ether-Ether-ketone) Laminated Composites by Introducing Fluorene-Containing Branched Poly(aryl-Ether-ketone)

Exploring the impact of hybridization on green composites: pineapple leaf and sisal fiber reinforcement using poly(furfuryl alcohol) bioresin

Improving the impact performance of natural fiber reinforced laminate through hybridization and layup design

Impact and fatigue tolerant natural fibre reinforced thermoplastic composites by using non-dry fibres

Low-velocity impact resistance and failure characteristics of all thermoplastic woven polymer-fiber-reinforced plastic composites