Abstract:Summary The phase change material is currently being regarded as an effective cooling media to be applied in the thermal management of lithium batteries‐powered vehicles, in which the inorganic hydrate phase change material is desirable and widely investigated due to the high thermal conductivity, latent heat value, and low cost. However, when applied to thermal energy storage applications, supercooling and phase separation are problematic. To effectively circumvent this issue, this work considers utilizing the disodium hydrogen phosphate dodecahydrate as the matrix of the composite phase change material, as the phase transition temperature is suitable for the battery's operating temperature range. Meanwhile, the nucleating agent sodium metasilicate nonahydrate with similar lattice parameters and the thickener carboxymethyl cellulose are used to suppress the supercooling and eliminate the phase separation, respectively. Effects of nucleating agent, surface modified aluminum nitride, and short‐cut carbon fiber on the supercooling degree, and thermal conductivity and curing performance in the phase change material are evaluated and discussed in detail to determine the optimal preparation scheme for Na2HPO4·12H2O/modified AlN/CF inorganic composite phase change materials. Experimental results show that the addition of 4 wt% Na2SiO3·9H2O, 4 wt% CMC, 12 wt% modified AlN, and 6 wt% CF reduces the supercooling degree of the composite phase change material to 1.9°C and increases the thermal conductivity to 1.86 W/(m·K). The composite phase change material is found to have a suitable phase change temperature (35°C), high latent heat (249 J/g), excellent shaping effect, and electrical safety performance. In addition, the composite phase change material battery module can effectively control the battery's temperature, with the maximum temperature reduced by 40.9°C at 3C discharge rate and 30°C ambient temperature compared with the natural cooling battery module. The maximum temperature difference of the composite phase change material battery module is shown to be reduced to the minimum value of 0.9°C. Highlights A novel disodium hydrogen phosphate dodecahydrate—modified aluminum nitride—carbon fiber composite phase change material is designed and prepared for battery thermal management systems. The antiwater modification scheme of AlN is proposed and assessed. The effects of AlN before and after modification on the thermal properties of CPCM are compared. The joint use of nucleating agent sodium metasilicate nonahydrate and thermal conductive filler AlN contributes to significantly inhibiting the supercooling of hydrate salt. The addition of CF can effectively increase the thermal conductivity of CPCM and prevent its leakage. CPCM has suitable phase change temperature, high thermal conductivity and latent heat value, excellent electrical safety, and stable curing performance. The battery test bench is constructed and the discharge test of the CPCM battery module is carried out. The results show that the CPCM battery module has excellent cooling performance and temperature uniformity.

Study on Physical Property Regulation and High-Temperature Heat Storage Properties of Al–Si Composite Phase Change Materials Prepared by One-Step Pressing

Preparation and Characterization of Fatty Acid Ternary Eutectic Mixture/Nano-Sio 2 Composite Phase Change Material for Building Applications

Research on the modification of microencapsulated phase change material for thermal energy storage by nano-SiO2 and graphite

Shape stabilized Al-Si/Al2O3 phase change composites for high temperature heat storage

Macroencapsulated Al-Si phase change materials for high temperature latent thermal energy storage

Novel and durable composite phase change thermal energy storage materials with controllable melting temperature

Electromagnetic self-encapsulation of carbon fiber reinforced Al matrix composite phase change material for high-temperature thermal energy storage

Investigation on thermal properties of capric–palmitic–stearic acid/activated carbon composite phase change materials for high-temperature cooling application

Preparation and characterization of a heat storage ceramic with Al-12 wt% Si as the phase change material

Preparation and Thermal Properties of Low Melting Point Alloy/expanded Graphite Composite Phase Change Materials Used in Solar Water Storage System

Preparation and Characteristics of Na2HPO4·12H2O-K2HPO4·3H2O/SiO2 Composite Phase Change Materials for Thermal Energy Storage

Recent Advancement in the Development of Silicon‐based Phase Change Materials

Novel composite phase change material of high heat storage and photothermal conversion ability

Characterization and experimental investigation of composite phase change materials based on aluminum nitride/expanded graphite

Thermal Properties of Stearic Acid/active Aluminum Oxide/graphene Nanoplates Composite Phase Change Materials for Heat Storage

Thermal Properties and Characterization of n-Decyl-Lauryl Alcohol/Expanded Graphite/Silicon Carbide Composite Phase Change Materials for Refrigerator Cold Energy Storage

Novel Sodium Chloride/Aluminum Oxide Powder-Composite Structure with High Shape-Retention Performance for the Encapsulation of a High-Temperature Phase-Change Material

Thermal performance enhancement of high durability alloy microencapsulated phase change material (MEPCM)/ceramic composites based on industrial graphene

THE SELECTNESS OF HIGH-TEMPERATURE PHASE CHANGE MATERIAL AI-Si ALLOY AND EXPERIMENTAL RESEARCH ON THE CONTAINER

Experimental investigation of aluminum nitride/carbon fiber‐modified composite phase change materials for battery thermal management

Thermal performance analysis of a thermal enhanced form-stable composite phase change material with aluminum nitride