Abstract:A novel and simple strategy for preparing the high‐performance composites from wood fiber (WF) and waterborne epoxy resin (WEP) was proposed. WF was simply and directly mixed with WEP and the mixture was hot‐pressed to form the WF/WEP composites. Overall, with the intelligible interfacial scheme and simple manufacturing process, the WF/WEP composites would provide new opportunities for developing a green and high‐performance composite that can be efficiently and commercially produced and environmentally friendly applied in the areas such as furniture and buildings. Developing green and high‐strength composites with feasible manufacturing process is desirable for advanced applications in construction, transportation, automotive, aerospace, and so on. A novel green and high‐strength wood fiber (WF)/waterborne epoxy resin (WEP) composite with high fiber content, low‐cost, and simple processing was proposed in this study. WF was simply and directly mixed with WEP and the mixture was hot‐pressed to mold the composite. The optimal tensile and flexural strength of 98 MPa and 155 MPa were achieved at 80% WF content, which were superior to those of traditional WF/EP composites. The interphase thickness of 220 nm of WF/WEP composite was more than twice as high as that of 109 nm of WF/EP composite, which was resulted from the penetration of WEP in the micro‐nano structure of WF. Furthermore, the thermal performance of WF/WEP composite was also promoted compared to those of WF/EP composites. This work demonstrated that composites with high WF content could achieve high performance and exhibit significant potential in many applications. Highlights Wood fiber/waterborne epoxy resin composites fabricated by a green and simple process. Optimal mechanical properties were achieved at 80% wood fiber content. WEP penetrated in the micro‐nano structure of WF. The composites with high WF content achieve high performance.

Preparation of Situ Microfiber-Reinforced Co-Extruded High-Filled Wood-Plastic Composite with Excellent Mechanical, Creep Resistance, and Water Resistance Properties

High‐Strength, Thermally Stable, and Processable Wood Fiber/Polyamide Composites for Engineering Structural Components

Mechanical properties and water absorption behavior of injection-molded wood fiber/carbon fiber high-density polyethylene hybrid composites

Constructing a rigid-flexible grid structure for simultaneously strengthening and toughening bamboo flour/plastic composites through the introduction of continuous carbon fabric meshes via multi-layer co-extrusion

Characteristics of paper mill sludge-wood fiber-high-density polyethylene composites

Optimizing the rheological and mechanical properties of ultra-highly filled wood fiber/polyethylene composites through binary alloy matrix strategy

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Toughening and reinforcing wood flour/polypropylene composites with high molecular weight polyethylene under elongation flow

Development and Characterization of Environmentally Friendly Wood Plastic Composites from Biobased Polyethylene and Short Natural Fibers Processed by Injection Moulding

High density polyethylene/wood flour composite: Optimization of processing temperature, processing time and coupling agent concentration

Preparation and Closed-Loop Recycling of Ultra-High-Filled Wood Flour/Dynamic Polyurethane Composites

A novel wood fiber/waterborne epoxy resin composite with high fiber content and performance fabricated by a green and simple process

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Scalable high-performance wood-based composites prepared by hydro-mechanical treatment

Preparation and Properties of Flame Retardant and Antistatic Foamed Wood–Plastic Composite with APP/ZB System

Preparation and characterization of micro/nanocellulose reinforced PVDF/wood composites

Sustainable Engineering Polymer Composites Fabricated Using Delignified Bamboo Fiber as Reinforcement and Walnut Shell Powder as Filler

Preparation and Characterisation of Sustainable Wood Plastic Composites Extracted from Municipal Solid Waste

Durability of High-Density Polyethylene (HDPE)- and Polypropylene (PP)-Based Wood-Plastic Composites—Part 1: Mechanical Properties of the Composite Materials

Combining Fiber Enzymatic Pretreatments and Coupling Agents to Improve Physical and Mechanical Properties of Hemp Hurd/Wood/Polypropylene Composite

Preparation of waste Camellia oleifera shell and high‐density polyethylene composites: Effect of pretreatment on fiber and materials properties