Microstructure and Thermal Property Evolution of Plasma-Sprayed Lu2SiO5 EBCs Under High Temperature Environments
Xin Zhong,Ruihui Liang,Pingping Liu,Du Hong,Lujie Wang,Yaran Niu,Xuebin Zheng
DOI: https://doi.org/10.1007/s11666-024-01735-1
IF: 2.839
2024-02-23
Journal of Thermal Spray Technology
Abstract:Lutetium monosilicate (Lu 2 SiO 5 ) has been considered as environmental barrier coatings (EBCs) materials for SiC f /SiC. Microstructural evolution and thermal properties changes of the Lu 2 SiO 5 coating would occur in high temperature environment. In this study, Lu 2 SiO 5 coating was fabricated by vacuum plasma spray technique. The microstructure, thermal stability, thermal conductivity, as well as thermal expansion behavior of the coating before and after thermal aging at 1350 °C were investigated. The tri-layer EBCs of Lu 2 SiO 5 /Yb 2 Si 2 O 7 /Si were designed and prepared onto SiC f /SiC substrates, and its thermal shocking behaviors were also explored. Results showed that the as-sprayed coating was mainly composed of Lu 2 SiO 5 , Lu 2 O 3 and amorphous phases, and significant microstructural evolution, such as grain growth and defects reduction, was observed after thermal aging. The coating exhibited linear expansion, and the CTE of the coating before and after heat treatment were similar, while the thermal conductivity increased after thermal aging. Thermal shock results showed that the coating remained intact after 100 cycles, and penetrating microcracks in the Lu 2 SiO 5 top layer were mostly stopped at the Lu 2 SiO 5 -Yb 2 Si 2 O 7 interface, indicating that the tri-layer EBCs on the SiC f /SiC substrate had good thermal shock resistance. The thermal shock behaviors were explained based on microstructure combined with thermal stresses analysis.
materials science, coatings & films