Abstract:Aiming at the perturbation of motion capability and the deviation of end effector from its desired trajectory caused by joint effectiveness partial loss failure, a fault-tolerant control strategy considering motion capability optimization is proposed to ensure that the faulty space manipulator can carry on-orbit operation tasks. Firstly, the joint effectiveness partial loss failure model is established, and the kinematic and dynamic model of the faulty manipulator is established based on the failure model. The kinematic and dynamic coupling relationship of the faulty manipulator is also analyzed. Then based on sliding mode control, the fault-tolerant control strategy that ensures the end effector trajectory tracking and base orientation deflection attenuation is designed. Meanwhile, the motion capability optimization model is designed based on the redundancy characteristic of the manipulator and combined with the fault-tolerant control system. This combined system can realize end effector trajectory tracking, base orientation deflection attenuation, and motion capability optimization at the same time. Finally, simulation experiment is carried out to verify the proposed fault-tolerant control strategy for the faulty manipulator. The result shows that the proposed fault-tolerant control strategy can realize end effector trajectory tracking, base orientation deflection attenuation, and motion capability optimization with high control accuracy, high convergence rate, and significant motion capability optimization effect. For both joint velocity partial loss and joint torque partial loss failure, the duration of convergence is less than 0.5 s, the steady-state error is less than 1 x 10-4 m for end effector position and less than 1 x 10-5 degree for base orientation deflection, and the motion capability indexes have been raised by over 40%.

Fault-Tolerant Kinematic Control of Redundant Manipulators with Joint Failures under Joint Velocity Disturbances

A Fault-Tolerant Method for Motion Planning of Industrial Redundant Manipulator

On the Virtual Joints for Kinematic Control of Redundant Manipulators with Multiple Constraints

Adaptive Robust Posture Control of A Pneumatic Muscles Driven Parallel Manipulator with Redundancy

Fault-tolerant motion planning and control of redundant manipulator

Kinematic Fault Tolerant Control for Redundant Robot Based on Joint Velocities Redistribution

A Discrete Model-Free Scheme for Fault Tolerant Tracking Control of Redundant Manipulators

Robust Tracking Control of Robot Manipulators with Actuator Faults and Joint Velocity Measurement Uncertainty

Multi-joint Manipulator Fault Diagnosis by Constructing Redundancy Residuals of Virtual Links

Fault-tolerant control strategy aiming at motion capability optimization for space manipulator with joint effectiveness partial loss failure

A Sparsity-Based Method for Fault-Tolerant Manipulation of a Redundant Robot.

Kinematic Optimization of Redundant Manipulators to Improve the Fault-Tolerant Control

The Optimization of Global Fault Tolerant Trajectory for Redundant Manipulator Based on Self-Motion

Fault tolerant motion planning based on joint torque limit for redundant manipulators

Active Fault-Tolerant Control Integrated with Reinforcement Learning Application to Robotic Manipulator

Kinematic Analysis and Fault-Tolerant Trajectory Planning of Space Manipulator under a Single Joint Failure

A Neural Control Architecture for Joint-Drift-Free and Fault-Tolerant Redundant Robot Manipulators

On the Joint Velocity Jump During Fault Tolerant Operations for Manipulators with Multiple Degrees of Redundancy

Acceleration-level Fault-Tolerant Scheme for Redundant Manipulator Motion Planning and Control: Theoretics

Decentralized Force/Position Fault-Tolerant Control For Constrained Reconfigurable Manipulators With Actuator Faults

Kinematic and Torque Distribution of Redundant Robot with Locked Joint Failures