Abstract:A miniaturized attitude control system (ACS), which is capable of attaining a high spin rate and good pointing accuracy, is an integral part of any small spacecraft. In this regard, embedded magnetorquers are gaining significant attention because they are inserted in printed circuit board (PCB) internal layers with no extra space occupation and result in almost no mass and development cost. In this article, an innovative embedded magnetorquer with asymmetric nonuniform geometric structure is presented. The proposed magnetorquer is optimized for various parameters of interest, i.e., magnetic moment, resultant generated torque, power consumed, and heat dissipation for a CubeSat standard nanosatellite by means of employing diverse nonunity track-width-ratio geometrical arrangements. The magnetorquer driver and reconfigurable circuit is implemented with commercial-off-the-shelf (COTS) components which are low cost and easily available from the market. Embedded coils with variable trace width were simulated in order to predict the accuracy and to achieve the maximum torque versus power dissipation ratio of the developed models. Time-varying rotational analyses are performed to evaluate the angular spin rates driven by the asymmetric coils. Due to embedded coil structure, a detailed thermal analysis is conducted for various coil configurations (i.e., series, parallel, hybrid, etc.) to preserve thermal limits and to ensure the efficacy of the system. The simulation results were validated through a comprehensive set of experimental measurements which also establishes the framework for selecting the optimal coils configuration based on specific mission requirements.

Comparison of Two High-Frequency Injection Methods with LADRC for Space Antenna Deployable Structures

High-Frequency Signal Injection-Based Sensorless Control for Dual-Armature Flux-Switching Permanent Magnet Machine

Relative roll control of satellite docking using electromagnetic coils

Micro- and Nanosatellite Sensorless Electromagnetic Docking Control Based on the High-Frequency Injection Method

A Solution Using Only Electromagnetic Coils for Relative Pose Control in Satellite Docking

Sensorless Control of Electromagnetic Docking Based on Model Reference Adaptive System

Deployment motion control research of deployable truss antenna

An One-Drive-four Wireless High Voltage High Speed Controller System Used in 100°/8 Ms MEMS Rotary Actuator for Antenna Array

Static Analysis of Synchronism Deployable Antenna

Development of a highly synchronized deployment space mast

Deployment Control and Test of Deployable Tetrahedral Truss Antenna

COMPARATIVE INVESTIGATION OF SENSORLESS CONTROL WITH TWO HIGH-FREQUENCY SIGNAL INJECTION SCHEMES

A High Frequency Injection Technique With Modified Current Reconstruction for Low-Speed Sensorless Control of IPMSMs With a Single DC-Link Current Sensor

Reconfigurable Asymmetric Embedded Magnetorquers for Attitude Control of Nanosatellites

Sensorless Operation of an Inset PM Bearingless Motor Implemented by the Combination Approach of MRAS and HF Signal Injection

CubeSats Detumbling Using Only Embedded Asymmetric Magnetorquers

Two Signal Injection Methods for Sensorless Control of Pmsm at Very Low Speeds

PCB-integrated embedded planar magnetorquers for small satellites intelligent detumbling

Research of Sensorless Control for Multiphase Induction Motor Based on High Frequency Injection Signal Technique

Design of the connection mechanism between the basic units of a planar deployable antenna

Optimization of Permanent Magnet Structure Parameters in Tubular Permanent Magnet Synchronous Linear Motor for HF Square-Wave Injection Sensorless Algorithm