Abstract:Transient stability issues of power converter systems have attracted much attention. Generally, the converter systems behave in high-order nonlinear dynamics due to multiple cascaded control loops, which become obstacles for transient stability analysis. Considering the dynamic coupling between active power and reactive power control loops, the grid-tied virtual synchronous generators (VSG) system is a third-order nonlinear system. Including the equal area criterion (EAC), many conventional methods are only applicable to second-order systems and cannot fully capture damping effects. To fill this gap, a novel iterative EAC method is proposed to handle the transient stability of the third-order VSG system. First, an implicit relationship from the output voltage to the power angle is derived by integral substitution. From energy aspects, the dynamic relations between voltage, power angle, and frequency are approximated by algebraic equations through iterative calculation. The impact of nonlinear damping is also fully captured quantitatively. Both conservatism and quantity of computation are improved compared with previous studies. Furthermore, the critical clearing angles under different disturbance forms and degrees are derived. In addition, some discussions about current limiters influence and different controller parameters influence are given. Simulation and hardware-in-the-loop experiments based on RT-Lab are conducted to verify the accuracy of the proposed method.

Interaction Analysis of VSG with Low-Inertia Grid and Damping Improvement Based on Loop Shaping

Damping Low-Frequency Oscillations Through VSC-HVdc Stations Operated As Virtual Synchronous Machines

An Adaptive Inertia Control to Improve Stability of Virtual Synchronous Machines under Various Power Grid Strength

Modeling and Analysis of Inner Controls Effects on Damping and Synchronizing Torque Components in VSG-Controlled Converter

Improved Power Decoupling Control Strategy Based on Virtual Synchronous Generator

Damping Effect of Virtual Synchronous Machines Provided by a Dynamical Virtual Impedance

Effect of Control Damping on Small-Signal Stability of Grid-Forming VSCs Considering Interaction Between Inner and Outer Loops

Improved Adaptive Inertia Control of VSG for Low Frequency Oscillation Suppression

Interaction Between Grid-Forming Converters with AC Grids and Damping Improvement Based on Loop Shaping

Impedance Modeling and Stability Analysis of VSG Controlled Grid-Connected Converters with Cascaded Inner Control Loop

Improved VSG strategy of grid-forming inverters for supporting inertia and damping

Effect of Different Reactive Power Control Structures of Voltage Source Converters on Transient Stability

Active Damping Technique Based on H ∞ Controller for VSC under Parallel Compensation Grid

Exploring Damping Effect of Inner Control Loops for Grid-Forming VSCs

A Parameter Alternating VSG Controller of VSC-MTDC Systems for Low Frequency Oscillation Damping

Modeling and Stability Analysis of Grid-Connected VSCs on Interactions Between ICFF Decoupling Control and PLL

Damping Analysis of Outer Control Loops and Impacts on Stability of Grid-Connected VSC

VSG power oscillation suppression strategies based on phase compensation and cross feedforward compensation

Small-Signal Modeling and Impedance Analysis of Virtual Synchronous Generator

Transient Stability Analysis for Grid-tied VSG Considering High-Order Nonlinear Interactions Between Active and Reactive Power Control Loops

Instability Analysis and Stabilization Control for DC Microgrids with Positive Feedback of Selected Frequency Islanding Detection Schemes