Abstract:The paper proposes the corrected complex torque coefficient method for grid‐connected VSC stability analysis. Based on the proposed method, a small‐signal stability criterion of VSC considering the outer controller is obtained without complex eigenvalue calculation. Besides, impacts of different control elements and source of damping are quantitatively analysed. Sub‐synchronous oscillation of grid‐connected voltage source converter (VSC) dominated by phase locked loop (PLL) is an important stability issue in nowadays power systems. The complex torque coefficient method has been used to investigate the issue because of its advantage of giving insights into source of damping and contributions of different components on damping. However, it is found that the classic complex torque coefficient method is not entirely applicable for stability analysis of VSC because of the proportional term in PLL. This paper proposes a corrected complex torque coefficient method and defines synchronous and damping coefficients. Based on the proposed method, a small‐signal stability criterion is obtained, in which the system stability depends on the sign of corrected damping coefficient. The impacts of different elements on system damping can be quantitatively evaluated through the method. It is drawn that current control loop and line dynamics contribute negative damping, whereas power control loop contributes positive damping. Moreover, the impacts of operating conditions and controller parameters on damping of different elements are analysed. The eigenvalue analyses and electromagnetic transient simulations have verified the theoretical analysis.

Damping Analysis of Outer Control Loops and Impacts on Stability of Grid-Connected VSC

Damping torque analysis for DC bus implemented damping control

Effect of Control Damping on Small-Signal Stability of Grid-Forming VSCs Considering Interaction Between Inner and Outer Loops

Damping Low-Frequency Oscillations Through VSC-HVdc Stations Operated As Virtual Synchronous Machines

Modeling and Analysis of Inner Controls Effects on Damping and Synchronizing Torque Components in VSG-Controlled Converter

Exploring Damping Effect of Inner Control Loops for Grid-Forming VSCs

Impedance-based Analysis of Constant Reactive Power Control for Voltage Source Converter in Weak AC Grids

Power Coupling Analysis and Improved Decoupling Control for the VSC Connected to a Weak AC Grid

Transient Stability Analysis and Control Design of Droop-Controlled Voltage Source Converters Considering Current Limitation.

DC Impedance Modeling and Stability Analysis of VSC with Consideration of Grid Impedance

Corrected complex torque coefficient method for synchronization stability analysis of grid‐connected VSC

Modeling and Stability Analysis of Grid-Connected VSCs on Interactions Between ICFF Decoupling Control and PLL

Influence of SVC Location on Subsynchronous Oscillation and SVC Control Strategy Research

Effect of Different Reactive Power Control Structures of Voltage Source Converters on Transient Stability

Instability Analysis and Stabilization Control for DC Microgrids with Positive Feedback of Selected Frequency Islanding Detection Schemes

Transient Stability Analysis for Grid-tied VSG Considering High-Order Nonlinear Interactions Between Active and Reactive Power Control Loops

Active Damping Technique Based on H ∞ Controller for VSC under Parallel Compensation Grid

Stability Analysis and Impedance Reshaping Method for DC Resonance in VSCs-based Power System

Design of Subsynchronous Oscillation Damping Controller of Grid-Connected VSC Based on Selective Modal Analysis Method

Analysis of Harmonic Oscillations Caused by Grid-Connected VSCs

Hybrid Frequency-Domain Modeling and Stability Analysis for Power Systems with Grid-Following and Grid-Forming Converters