Abstract:This brief presents a dual-band balanced filter with wide stopband, controllable transmission zeros and bandwidths, and compact size based on a newly designed electromagnetically coupled stepped impedance resonator (SIR) pair. The proposed SIR contains three different impedance lines, which can lead to more degrees of design freedom for resonant frequency control. Two electrical length ratios of the SIR can be individually tuned to obtain two desired differential-mode (DM) resonant frequencies for dual-band design, while keeping the first spurious frequency far away for wide-stopband design. Moreover, an inherent common-mode (CM) suppression can also be obtained without adding extra structures due to the discriminating CM resonant frequencies. The mechanism of transmission zeros (TZs) generation is also investigated by means of phases and admittance analysis. It reveals that four TZs around the two operating bands can be flexibly controlled via adjusting the ratio of magnetic and electric coupling coefficients of the SIR pair as well as the coupling space of the feeding lines, which have greatly enhanced the passband selectivities and the band-to-band isolation. Subsequently, the graphs of coupling coefficients and external quality factors for the filter design are extracted, showing sufficient degrees of design freedom for bandwidth control. The proposed dual-band balanced filter is finally fabricated and measured at 1.75 GHz and 3.64 GHz, respectively. Measured results are in good agreement with the simulated ones. Compared with the state-of-the-art works, the proposed circuit performs a deeper and wider stopband of 4.5f 1 d with 40dB attenuation (where f 1 d is the fundamental frequency), and more than 50-/45-dB in-band CM suppressions with compact size (0.14λ g × 0.27λ g , where λ g is the guided wavelength of the fundamental frequency).

Design of Single-Cavity Dual-Band Filter Based on Stepped Impedance Resonators

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

A Dual-Band Filter Using Stepped-Impedance Resonator (SIR) Embedded into Substrate Integrated Waveguide (SIW)

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Tri-Band Microstrip Bandpass Filter Using Dual-Mode Stepped-Impedance Resonator

Compact Superconducting Single- and Dual-Band Filter Design Using Multimode Stepped-Impedance Resonator

Dual-Band Substrate Integrated Waveguide Filters With Perturbed Circular Cavity

Design of dual-mode filters using stepped impedance resonators with stub loading

A Class of Box-Like Bandpass Filters with Wide Stopband Based on New Dual-Mode Rectangular SIW Cavities

Design of Dual-Band Filter Based on OLRR and DSIR

A New Compact Wideband Filter Based on a Coupled Stepped Impedance Resonator

Compact Dual-Band Differential Bandpass Filter Using Quadruple-Mode Stepped-Impedance Square Ring Loaded Resonators.

Design of dual-band microstrip filter using SIR

COMPACT DUAL-BAND BANDPASS FILTER USING IMPROVED SPLIT RING RESONATORS BASED ON STEPPED IMPEDANCE RESONATOR

Compact Dual-Band Bandpass Filter Using Stepped Impedance Resonators

Dual-Band Dual-Mode Compact Multilayer Quasi-Elliptical SIW Filter

Miniaturized dual-band bandpass filter with wide stopband using stepped impedance resonators

Novel design of a compact triple-band bandpass filter using short stub-loaded sirs and embedded sirs structure

Compact Wide-Stopband Dual-Band Balanced Filter Using an Electromagnetically Coupled SIR Pair with Controllable Transmission Zeros and Bandwidths.

Compact, Dual‐band, and Hybrid Filter Based on Combline and Substrate Integrated Waveguide Resonators

A bandpass filter using asymmetric stepped-impedance resonators and symmetric T-shape interdigital capacitor structures with wide out-of-band rejection