Abstract:A new type of microstrip dual-mode dual-band bandpass filter (BPF) using a single quadruple-mode resonator (QMR) is proposed in this paper. The classical even-/odd-mode method is applied to analyze the characteristics of the proposed resonator, which shows that it has two pairs of symmetrical resonant modes. Owing to the inherent characteristic of a dual-mode resonator and source-load coupling, four transmission zeros can be produced and these four resonant modes can be divided in two groups, resulting in a dual-band BPF with two resonant modes in each passband. As examples, two dual-mode dual-band BPFs, Filter A with central frequencies (CFs) at 1.99/5.58 GHz and -3-dB fractional bandwidth (FBW) of 62.3%/19.7%, while Filter B with CFs at 1.64/5.26 GHz and -3-dB FBW of 32.9%/7.6%, are designed and fabricated. An aperture-backed compensation technique is employed in such two filters to enhance the coupling strength between the feeding lines and QMR. Furthermore, a meander coupled-line section is employed in the Filter A design, while a defected microstrip structure is introduced in Filter B design, so as to increase much more design freedoms for tuning filter performance. The fabricated two filters exhibit simple design procedures, low insertion losses, good return losses, sharp shirts, and compact sizes. Moreover, two BPFs do not need external input/output impedance transformation feeding lines.

Compact Dual-Band Differential Bandpass Filter Using Quadruple-Mode Stepped-Impedance Square Ring Loaded Resonators.

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Balanced Tri-Band Bandpass Filter Using Sext-Mode Stepped-Impedance Square Ring Loaded Resonators.

Miniaturized Dual-Mode Dual-Band BPF Using a Single Square Patch Loaded Stepped-Impedance Square Open Loop Resonator

Compact Dual-Band Bandpass Filter Using Uniform-Impedance Resonators and Dual-Mode Resonator

Compact Dual-Band Bandpass Filter Using Stub-Loaded Stepped Impedance Resonators with Mixed Electric and Magnetic Couplings

Compact Quad-Band Bandpass Filter Using Double-Diplexing Structure

Compact Dual- and Triband Bandpass Filter Using Frequency Selecting Coupling Structure Loaded Stepped-Impedance Resonator

Compact and Sharp Skirts Microstrip Dual-Mode Dual-Band Bandpass Filter Using a Single Quadruple-Mode Resonator (QMR)

Compact tri-band bandpass filter using short stud-loaded symmetric loop multimode resonator

Compact Multi-Band Differential Bandpass Filters Using Microstrip Multi-mode Resonators

Design of Compact Dual-Band Bandpass Filter Using Dual-Mode Stepped-Impedance Stub Resonators

Compact Tri-Band Bandpass Filter Using Sisrlr

Balanced Tri-Band Bandpass Filter Design Using Octo-Section Stepped-Impedance Ring Resonator with Open Stubs

Compact Balanced Tri-Band Superconducting Band-Pass Filter Using Double Square Ring Loaded Resonators

Design of Triple-Band Bandpass Filter Using Quad-Mode Stepped Impedance Resonator (SIR) with Shorted Stub.

A High Selectivity Quadruple-Mode Bpf with Two Short-Circuited Stub-Loaded Sirs

Independently Controllable Dual-Band Microstrip Bandpass Filter Using Quadruple-Mode Stub-Loaded Resonator

Compact Quad-Band Bandpass Filter Based on Sextuple-Mode Stepped Impedance Stub-Loaded Resonator

Novel Compact Dual-Band BPF Using Stub-Loaded Shorted Stepped-Impedance Resonators

A Quad‐band Bandpass Filter Using Split‐ring Based on T‐shaped Stub‐loaded Step‐impedance Resonators