Abstract:Poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt(4,4′-(N-(4-butylphenyl))] (TFB), one of the most popular and widely used hole-transport layer (HTL) materials, has been successfully applied in high performance spin-coated quantum dots-based light-emitting diodes (QLEDs) due to its suitable energy level and high mobility. However, there are still many challenging issues in inkjet-printed QLED devices when using TFB as HTL. TFB normally suffers from the interlayer mixing and erosion, and low surface energy against the good film formation. Here, a novel environment-friendly binary solvent system was established for formulating quantum dot (QD) inks, which is based on mixing halogen-free alkane solvents of decalin and n-tridecane. The optimum volume ratio for the mixture of decalin and n-tridecane was found to be 7:3, at which a stable ink jetting flow and coffee-ring free QD films could be formed. To research the influence of substrate surface on the formation of inkjet-printed QD films, TFB was annealed at different temperatures, and the optimum annealing temperature was found to enable high quality inkjet-printed QD film. Inkjet-printed red QLED was ultimately manufactured. A maximum 18.3% of external quantum efficiency (EQE) was achieved, reaching 93% of the spin-coated QLED, which is the best reported high efficiency inkjet-printed red QLEDs to date. In addition, the inkjet-printed QLED achieved similar T75 operational lifetime (27 h) as compared to the spin-coated reference QLED (28 h) at 2,000 cd·m−2. This work demonstrated that the novel orthogonal halogen-free alkane co-solvents can improve the interfacial contact and facilitate high-performance inkjet printing QLEDs with high EQE and stability.

61‐2: Distinguished Paper: Development of the Ink‐jet Printing Technology for 55 Inch 8K AMQLED Display

68‐3: Distinguished Paper: A 4.7 inch 650 PPI AM‐QLED Display Prepared by Direct Photolithography

75‐4: Inkjet‐Printed Quantum Dot Display with Blue OLEDs for Next Generation Display

Full-color Quantum Dots Active Matrix Display Fabricated by Ink-Jet Printing

High-efficiency and high-resolution patterned quantum dot light emitting diodes by electrohydrodynamic printing

High-Resolution Quantum Dot Light-Emitting Diodes by Electrohydrodynamic Printing

P‐14.1: Improving the Performance of Inkjet Printed QLED by Annealing Post‐treatment

P‐12.1: Inkjet Printed Quantum Dots for Full Color Active Matrix Micro‐LED Display

P‐14.2: Optimizing the Performance of Inkjet Printed Green QLED by Precisely Control of Shell Thickness

High Performance Pixelated Quantum Dots Array on Micro-Led by Inkjet Printing

Achieving high performance InP quantum dot light-emitting devices by using inkjet printing

Efficient Top-emitting Quantum Dot Light Emitting Diodes Via Inkjet Printing

High performance inkjet-printed QLEDs with 18.3% EQE: improving interfacial contact by novel halogen-free binary solvent system

Dual ligand exchange of Cd‐free quantum dots and optimal control of ink formulation for improving the performance of all‐inkjet‐printed qunatum dot light‐emitting diodes

25‐3: Highly Efficient, All‐Inkjet‐Printed, Deep Red Quantum Dot Light Emitting Diodes from Positive Aging

High-performance inkjet-printed inverted QD-LEDs based on cross-linkable electron regulation layers

High‐Resolution Inkjet Printing of Quantum Dot Light‐Emitting Microdiode Arrays

Inkjet Printed Uniform Quantum Dots As Color Conversion Layers for Full-Color OLED Displays.

P‐107: Inkjet Printed Uniform Quantum Dots As Color Conversion for Active Matrix Micro‐LED Display

Inkjet Printed Quantum Dots Color Conversion Layers for Full-Color Micro-LED Displays

Dewetting-assisted inkjet printing and optimized solvent mixture of Cd-free InP quantum dots for high-resolution pixel-pattern