Abstract:Fatigue life is a key factor for designing an asphalt pavement, which is usually determined by a fatigue test with a failure criterion. Most of the existing criteria lack a direct identification of fatigue failure as the cracked area reaches its maximum value, which is specific for each asphalt mixture and depends on its own composition. This paper fills this gap by proposing the usage of damage density, and derives the fatigue life based on the visco-elasto-plastic form of Paris' law with damage density (or modified Paris' law) for an asphalt pavement. Furthermore, it provides both the test-based calculation and nontest estimation for the fatigue life. As the starting of fatigue damage, the crack initiation point, also known as endurance limit, is first derived to be a simplified version of the energy-based crack initiation criterion for visco-elasto-plastic materials. As the ending of fatigue damage, the number of load cycles to failure, or fatigue life, is derived from the modified Paris' law and calculated using the data from the two mechanics-based test protocols, one for microcracking and the other for macrocracking. To derive the fatigue life from the modified Paris' law, a characteristic curve that relates the pseudo J-integral to the damage density by the coefficients r and q is defined in this study. It takes into account the loading level and structure of a tested specimen or a field pavement. Based on the data analyzed, a strong correlation is found between r and q. In addition, a prediction model is developed for q using simple mixture and pavement design information. The simplified energy-based crack initiation criterion allows a quick estimate of endurance limits using the mixture modulus, surface energy, and air void content. The fatigue lives of 47 asphalt mixtures with different compositions are calculated using the test data, which are reasonable and vary with the binder type, air void content, aging period, and loading level. Moreover, with the discovery of r and q, the fatigue life can be readily estimated without testing by knowing the asphalt binder type and content, aggregate gradation, air void content, mixture modulus, surface layer thickness, and the traffic level. The case studies are presented as examples to demonstrate the sensitivity of the proposed approach as well as the procedure to determine fatigue lives for field pavements. The predicted fatigue lives were verified by field fatigue observations. (C) 2017 American Society of Civil Engineers.

Mechanical and Internal Structural Damage Evolution in Cold Recycled Mixture under Fatigue Loading

High- and Low-Temperature Fracture Behavior of Pervious Asphalt Mixtures under Different Freeze–thaw Cycles Based on Acoustic Emission Technique

Kinetics-based Aging Evaluation of In-Service Recycled Asphalt Pavement

Mechanistic Composition–Specific Fatigue Life of Asphalt Pavements

Fatigue resistance investigation of warm‐mix recycled asphalt binder, mastic, and fine aggregate matrix

Study on the strength composition mechanism and interface microscopic characteristics of cold recycling asphalt mixture

Investigating mechanical performance and interface characteristics of cold recycled mixture: Promoting sustainable utilization of reclaimed asphalt pavement

EXPERIMENTAL ANALYSIS ON FATIGUE PERFORMANCE OF HOT RECYCLED ASPHALT MIXTUR OF WATER INSRUSION

The effect of RAP content on fatigue damage property of hot reclaimed asphalt mixtures

Fatigue Damage Evolution in Asphalt Mixture Based on X-ray CT Images

Study of Decay Mechanisms and Rules of Recycled Asphalt Pavement via a Full-Scale Experiment

Cold Recycled Asphalt Mixture using 100% RAP with Emulsified Asphalt-Recycling Agent as a New Pavement Base Course

Study of Fatigue-Damage Characteristics of Recycled Asphalt Mixture

Laboratory and Field Research on Using Cement and Polyester Fiber to Enhance the Performance of Emulsified Asphalt Cold Recycled Mixture

Mechanistic Characterization of Fatigue Damage Process and Failure Predictions of Asphalt Binders

Research on Fatigue of Cold Recycling Mixtures with Emulsion Asphalt

Investigation on Fracture Performance of Hot-Mix Asphalt with Reclaimed Asphalt Pavement under Fatigue Loading

A comprehensive review on the fatigue resistance of recycled asphalt materials: Influential factors, correlations and improvements

Microstructure in Adhesion Development Process and Strength Formation Mechanism in Early Stage of Cold Recycled Mixture with Emulsified Asphalt

Experimental Analysis of Cold Recycling for Waste Asphalt Pavement

Strength Development and Deterioration Mechanisms of Foamed Asphalt Cold Recycled Mixture Based on MD Simulation