Abstract:The rehabilitation process of asphalt pavements using the technique of milling and filling can cause several environmental problems due to either the disposal of the milled asphalt mix or the exploration of natural resources. One alternative to mitigate these impacts is to reuse this milled material, known as reclaimed asphalt pavement (RAP), in the construction of new pavement layers. Within the several available techniques to reuse the RAP, cold recycling using an emulsified asphalt-recycling agent has shown great potential. The aim of this study is to evaluate the application of a cold recycled asphalt mix using 100% RAP with an emulsified asphalt-recycling agent as a new pavement base course. A trial section was built employing this material as a pavement base course in a heavy traffic highway in Brazil, and its structural behavior was monitored for 12 months using a Falling Weight Deflectometer (FWD) to assess its performance over time. Furthermore, a laboratory-testing program was performed to evaluate the recycled mixture stiffness and strength through resilient modulus and indirect tensile strength tests. These tests were used to investigate the influence of the storage interval (7, 14, and 28 days) considering the time between mixing and compaction of the mixture. The effect of the curing time after compaction (1, 3, 7, 26, and 56 days) was also assessed. It was verified in laboratory and in the trial section that the stiffness increases with curing time. Furthermore, the backcalculated elastic resilient moduli indicated values in the same order of magnitude to those obtained in the laboratory tests. In addition to the laboratory test findings, it was also observed that the longer the period of storage, the higher the values of stiffness and tensile strength for short periods of curing. This behavior was not verified when longer curing periods were used. In general, the use of cold recycled asphalt mixtures as base course of new pavements proved to be a promising alternative to reuse RAP.

Experimental Analysis of Cold Recycling for Waste Asphalt Pavement

Study on the strength composition mechanism and interface microscopic characteristics of cold recycling asphalt mixture

Performance evaluation of the recycled asphalt mixture based on cold patch asphalt for pavement repair

Cold Recycled Asphalt Mixture using 100% RAP with Emulsified Asphalt-Recycling Agent as a New Pavement Base Course

Design Method and Evaluation Criteria on Gyratory Compaction Based Cold-Mixed and Cold-Laid Recycled Asphalt Mixture

Laboratory Study on Cold Recycling with Foamed Asphalt

Study on the Performance and Mechanism of Cold-Recycled Asphalt Based on Permeable Recycling Agent

Mechanical and Internal Structural Damage Evolution in Cold Recycled Mixture under Fatigue Loading

Laboratory and Field Research on Using Cement and Polyester Fiber to Enhance the Performance of Emulsified Asphalt Cold Recycled Mixture

Investigating mechanical performance and interface characteristics of cold recycled mixture: Promoting sustainable utilization of reclaimed asphalt pavement

Effect of Mechanical Properties on Performance of Cold Mix Asphalt with Recycled Aggregates Incorporating Filler Additives

Experimental Study on Road Performance of Cold Recycled Asphalt Mixture with Emulsified Asphalt

Study on Cold Recycled Asphalt Mixtures with Emulsified/Foamed Asphalt in the Laboratory and On-Site

Performance Evaluation of Hot In-Place Recycled Asphalt Mixtures

Research and Application of Warm Recycled Asphalt Mixture

Performance Evaluation and Feasibility Study on Reuse of Reclaimed Epoxy Asphalt Pavement (REAP)

Freeze and Thaw Field Investigation of Foamed Asphalt Cold Recycling Mixture in Cold Region

Research on Water Stability of Cold Recycled Mixtures with Emulsified Asphalt

Study on the Road Performance of Foamed Warm-Mixed Reclaimed Semi-Flexible Asphalt Pavement Material

Design and Performance Evaluation of Cold Recycled Mixture with Emulsified Asphalt