Abstract:Solid oxide electrolysis cells (SOECs) can efficiently convert the greenhouse‐gas CO2 to valuable fuel CO at the cathodes. Herein, fluorine is doped into mixed ionic–electronic conducting Sr2Fe1.5Mo0.5O6‐δ (SFM), to evaluate its potential use as a cathode for CO2 reduction reaction (CO2‐RR). SFM retains its cubic structure after doped with fluorine, forming perovskite oxyfluoride Sr2Fe1.5Mo0.5O6‐δF0.1 (F‐SFM). The substitution of oxygen by fluorine increases CO2 adsorption by a factor of ≈2, bulk oxygen vacancy concentration by 35–37% at 800 °C, and consequently enhances the surface reaction rate constant for CO2‐RR and chemical bulk diffusion coefficient by factors of 2–3. The faster kinetics are also reflected by a lower polarization resistance of 0.656 Ω cm2 for F‐SFM than 1.130 Ω cm2 for SFM at 800 °C in symmetrical cells. Furthermore, the single cell with F‐SFM cathode exhibits the best CO2 electrolysis performance among the reported perovskite electrodes, achieving current density of 1.36 A cm−2 at 1.5 V and excellent stability over 120 h at 800 °C under harsh conditions. The theoretical computations confirm that fluorine doping is energetically favorable to CO2 adsorption and dissociation. The present work provides a promising strategy for the design of robust cathodes for direct CO2 electrolysis in SOECs. Solid oxide electrolysis cells are promising energy conversion devices that can efficiently convert CO2 to CO and O2. However, their use is impeded mainly due to the absence of a highly active and durable cathode. This work successfully demonstrates that a SOEC with fluorine‐doped perovskite Sr2Fe1.5Mo0.5O6‐δ cathode enables direct electrolyzing of CO2 with excellent performance and durability.

A perovskite infiltrated cathode of metal-supported solid oxide electrolysis cell for CO2 electrolysis

A perovskite infiltrated cathode of metal-supported solid oxide electrolysis cell for CO 2 electrolysis

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Bismuth doped Sr2Fe1.5Mo0.5O6-3 double perovskite as a robust fuel electrode in ceramic oxide cells for direct CO2 electrolysis

Metal-supported solid oxide electrolysis cell for direct CO2 electrolysis using stainless steel based cathode

An Efficient Symmetrical Solid Oxide Electrolysis Cell with LSFM-based Electrodes for Direct Electrolysis of Pure CO2

Perovskite Oxyfluoride Electrode Enabling Direct Electrolyzing Carbon Dioxide with Excellent Electrochemical Performances

Constructing perovskite/alkaline-earth metal composite heterostructure by infiltration to revitalize CO2 electrolysis

Boosting CO2 directly electrolysis by electron doping in Sr2Fe1.5Mo0.5O6-δ double perovskite cathode

Advancements and prospects of perovskite-based fuel electrodes in solid oxide cells for CO2 electrolysis to CO

Anion Fluorine-Doped La<sub>0.6</sub>Sr<sub>0.4</sub>Fe<sub>0.8</sub>Ni<sub>0.2</sub>O<sub>3- </sub> Perovskite Cathodes with Enhanced Electrocatalytic Activity for Solid Oxide Electrolysis Cell Direct CO<sub>2</sub> Electrolysis

Modification of LSCM Structure by Anchoring Alloy Nanoparticles for Efficient CO 2 Electrolysis

In-situ passivation of Fe nanoparticles exsolved from perovskite cathodes through Zinc doping for CO2 electrolysis

Perovskite Oxyfluoride Ceramic with in Situ Exsolved Ni-Fe Nanoparticles for Direct CO2 Electrolysis in Solid Oxide Electrolysis Cells.

Active Cu and Fe Nanoparticles Codecorated Ruddlesden–Popper‐Type Perovskite as Solid Oxide Electrolysis Cells Cathode for CO2 Splitting

A High‐Entropy Layered Perovskite Coated with In‐situ Exsolved Core‐shell CuFe@FeOx Nanoparticles for Efficient CO2 Electrolysis

Fabrication of anode supported solid oxide electrolysis cell with the co-tape casting technique and study on co-electrolysis characteristics

Reducing d-p band coupling to enhance CO2 electrocatalytic activity by Mg-doping in Sr2FeMoO6-δ double perovskite for high performance solid oxide electrolysis cells

Enhancing CO2 Electrolysis Performance with Vanadium-Doped Perovskite Cathode in Solid Oxide Electrolysis Cell

Symmetrical La3+-doped Sr2Fe1.5Ni0.1Mo0.4O6-δ Electrode Solid Oxide Fuel Cells for Pure CO2 Electrolysis

In situ exsolved Fe nanoparticles enhance the catalytic performance of perovskite cathode materials in solid oxide electrolytic cells