Prediction of time-varying dynamics and chatter stability analysis for surface milling of thin-walled curved CFRP workpiece
Jun Deng,Fuji Wang,Rao Fu,Yongquan Lin,Qingsong He,Xing Ma
DOI: https://doi.org/10.1016/j.jmatprotec.2023.118186
IF: 6.3
2023-10-24
Journal of Materials Processing Technology
Abstract:Machining curved surfaces for thin-walled components is always challenging. Due to the strong anisotropic features of carbon fiber reinforced plastic (CFRP), new challenges, such as prediction accuracy loss, have emerged for avoiding the chatter of machining thin-walled curved CFRP workpieces. This paper studied the influence of the anisotropic properties of CFRP workpieces and time-varying dynamics on surface milling stability. An improved damping and time-varying dynamics prediction model was proposed integrated with FEA and numerical calculation considering the change of cutting position, the materials removed, and the anisotropic features of CFRP. Then, the 3D stability lobe diagram (SLD) was achieved by considering the dynamic change at each cutter point on the machining path and dynamic cutting forces based on the instantaneous fiber cutting angle. Based on the obtained 3D SLD, CFRP milling chatter could be accurately avoided, and machining efficiency could be improved. A case study of milling a thin-walled toroidal surface was conducted for validation. In the machining process of CFRP, unlike homogeneous materials such as metals, the natural frequency of CFRP fluctuates nonlinearly with the change curve of material removal within a specific range. Under a higher material removal rate, the surface roughness of the machined surface has been reduced by 74%, Ra below 2.35 μm, based on the selected process parameters of the novel-established SLD, compared to the surface roughness, Ra close to 9.21 μm, obtained by the previous method without considering the time-varying dynamics.
materials science, multidisciplinary,engineering, manufacturing, industrial