Abstract:Multiphase jets and cavitation problems are inevitable for high-speed underwater vehicles propelled by jet engines. Unlike being injected into stagnant water, the gaseous jet behind a underwater vehicle is usually conjugated with a tail cavity. The pulsation and collapse of such cavities can seriously affect the vehicle performance. In this study, the shape character, forming mechanism and control conditions for the supersonic gaseous jet induced tail cavity at the wake of a revolution body are experimentally investigated in a water tunnel. The induced cavity is ventilated only by a convergent-divergent nozzle with a designed Mach number of 2.45. The form of the cavity is recorded through two high-speed cameras both horizontally and vertically under different Froude numbers and ventilation rates. The time averaged form is thus obtained through digital image processing to eliminate the transient characteristics of the cavity. The experiment is conducted with the Froude number ranging from 3.2 to 16.2, and the ventilation rate 0 to 0.5. Due to the high density and velocity ratio between water and gas, the structure of such flow is usually very complicated. Many novel phenomena of the jet-cavity interaction are observed. With increasing stagnation pressure of the central jet, the induced cavities evolves form foamy, intact, partially break, to pulsating foamy closure type. The foamy and intact tail cavities share the same profile and characteristics that of a supercavity. And the pulsating foamy closure type was never observed before in a traditional supercavitating flow. The outline of the pulsating foamy cavity is the same as the foamy cavity's, indicating that they have the similar forming mechanism. A comparison with the jet-cavity interaction model is made and the following conclusions are obtained: the real ventilation rate, which corresponds to the re-entrant jet gas blocked by the cavity boundary, is the key factor in controlling the cavity form. When the gaseous jet is completely blocked by the water-gas interface, an intact or foamy cavity will be formed. A partially break cavity appears only when some fraction of the jet is blocked and this is when some of the strongest interactions between jet and cavity occurs. When little gas was blocked by the interface, a pulsating foamy cavity forms. With the structure of gaseous jet considered, the transition of the induced cavity closure between different types is in favour of the prediction from Paryshev's model of cavity closure to a central jet. The variation of the cavity form, thus the interaction strength between jet and cavity, coincides with the real ventilation rate estimated through the theoretical model.

Analysis of the Effect of Underwater Supersonic Gas Jet on the Ventilated Supercavitation Flow

Numerical Investigation of Supercavity Geometry and Gas Leakage Behavior for the Ventilated Supercavities with the Twin-Vortex and the Re-Entrant Jet Modes

Numerical Simulation of Influence of Tail Jet on Steady Supercavitation Configuration

Experimental Technology for Investigating Tail Jet Influence on Supercavitation Flow

Numerical Analysis of the Effects of Periodic Gust Flow on the Wake Structure of Ventilated Supercavities

Analysis of the Unsteady Flow Characteristics of Underwater Supersonic Gaseous Jets

The effect of ventilation on supercavity around a supercavitating vehicle during water-entry

Comparison of Supercavity Geometry and Gas Leakage Behavior Between the Double-Cavity Flow Pattern and the Wake-Closure Flow Pattern

Numerical Simulation on Supercavity Characteristics of Disc Cavitator Based on SST Turbulence Model

Influence of Attack Angle on Ventilated Supercavitating Flow at High Froude Number Condition

INVESTIGATION OF INTERNAL FLOW VELOCITY DISTRIBUTION AND GAS LOSS OF HIGH-SPEED SUPERCAVITATING FLOWS

Experimental and numerical analysis of the physical characteristics of natural and ventilated supercavitating flows

Variation Characteristics of Formation and Development of Ventilated Supercavity at Low Froude Numbers

Experimental Study on the Ventilation Rate of Artificial Supercavitation

Experimental Study on Submerged Supersonic Gaseous Jet Induced Tail Cavity

Study on the interaction between ventilated cavitating flow and exhausted gas of an underwater vehicle

On the Evolution of Supercavity Geometry and Unsteady Behavior of Supercavitation Flow During the Development of a Twin-Vortex Supercavity

Hydrodynamic Characteristics and Supercavity Shape of Supercavitating Projectiles Launched with Supersonic Speed

Influence of Ramjets’ Water Inflow on Supercavity Shape and Cavitator Drag Characteristic

Blockage Effect of a Wall on the Hydrodynamic Characteristics of a Supercavitating Vehicle's Aft Body

Experimental Study of the Structural and Hydrodynamic Noise Characteristics of Jet-Induced Supercavities