Abstract:in situ high-temperature X-ray diffraction and thermal gravimetric-differential thermal analysis on room-temperature powder, as well as X-ray diffraction, Raman spectroscopy, and transmission electron microscopy on quenched powder, were applied to study crystal structure and phase transformations in Ba2Bi0.1Sc0.2Co1.7O6-x (BBSC). Heating BBSC in air to over 800 degrees C produces a pure cubic phase with space group Fm (3) over barm (no. 225), and cooling down below 800 degrees C leads to a mixture of three noncubic phases including an unknown phase between 200 and 650 degrees C, a 2H hexagonal BaCoO3 with space group P63/mmc (no. 194) between 600 and 800 degrees C, and an intermediate phase at 800 degrees C. These three phases exist concurrently with the major cubic phase. The weight gain and loss between 300 and 900 degrees C suggest the occurrence of cobalt reduction, oxidation, and disproportion reactions with dominant reduction reaction at above 600 degrees C. The thermal expansion of BBSC was also examined by dilatometry. BBSC has a highly temperature-dependent thermal expansion coefficient which relates well with its structure evolution. Furthermore, the oxygen reduction reaction (ORR) of BBSC was probed by symmetrical cell and three-electrode configurations. The presence of hexagonal phase at 700 degrees C rarely affects the ORR performance of BBSC as evidenced by a slight increase of its area-specific resistance (ASR) value following 48 h of testing in this three-electrode configuration. This observation is in contrast to the commonly held point of view that noncubic phase deteriorates performance of perovskite compounds (especially in oxygen transport applications). Moreover, cathodic polarization treatment, for example, current discharge from BBSC (tested in three-electrode configuration), can be utilized to recover the original ORR performance. The cubic structure seems to be retained on the cathodic polarization-the normal cathode operating mode in fuel cells. Stable 72-h performance of BBSC in cathodic polarization mode further confirms that despite the presence of phase impurities, BBSC still demonstrates good performance between 500 and 700 degrees C, the desired intermediate operating temperature in solid oxide fuel cells.

Formation of $\text{ba}_{3}\text{sc}_{2}\text{wo}_{9}$ on the $\text{ba}_{2}\text{scalo}_{5}$ Therminoic Cathode Surface

Formation of <tex>$\text{Ba}_{3}\text{Sc}_{2}\text{WO}_{9}$</tex> on the <tex>$\text{Ba}_{2}\text{ScAlO}_{5}$</tex> Therminoic Cathode Surface

Understanding the Surface Reconstruction on Ternary W<i><sub>x</sub></i>CoB<i><sub>x</sub></i> for Water Oxidation and Zinc-Air Battery Applications

Vacuum Evaporation Synthesizing Sc Film Layer and Elucidation of Near-Surface Ba-O-Sc Electronic Configuration for Dispenser Cathode

Effect of Sc2O3 Addition on the Phase Composition and Electron Emission Performance of Co-precipitated Aluminates for Impregnated Cathodes

Electron Emission Energy Barriers and Stability of $Sc_2O_3$ with Adsorbed Ba and Ba-O

Investigation of Influence of Surface Activator Element on Scandate Cathodes Work Function

A Study of Eu2O3, Sc2O3 Co-Doped Tungsten Matrix Impregnated Cathode

Thermionic Emission Capability of the Ba–Sc–Al–O Compound Synthesized by High-Temperature Solid-State Process

Preparation of W–Sc2O3 Targets and Scandate Cathodes with Film Prepared by Pulsed Laser Deposition

The effect of Ir and Sc on the emission capacity of W–Ir matrix scandate cathodes prepared via a novel in situ method

Investigation on Scadium Thin Films on Dispenser Cathodes

Phase Evolution, Texture Behavior, and Surface Chemistry of Hydrothermally Derived Scandium (hydrous) Oxide Nanostructures

Thermionic Electron Emission Capacity of the Ba $_{\text{3}}$ ScGa $_{\text{2}}$ O $_{\text{7.5}}$ Impregnated Cathode

Deactivation and Regeneration of Oxygen Reduction Reactivity on Double Perovskite Ba(2)Bi(0.1)Sc(0.2)Co(1.7)O(6-x) Cathode for Intermediate-Temperature Solid Oxide Fuel Cells

Preparation and Surface Characteristics of Re3W Matrix Scandate Cathode: an Experimental and Theoretical Study

Surface Modifications of Nano-Structured Cathodes to Enhance Durability of Intermediate Temperature Solid Oxide Fuel Cells

The Electronic Structure and the Oxygen Adsorption at BaO Terminated Surface of GdBaCo2O5.5: A First Principles Study

Sc2O3–W matrix impregnated cathode with spherical grains

Sc and Nb Dopants in SrCoO3 Modulate Electronic and Vacancy Structures for Improved Water Splitting and SOFC Cathodes

Understanding the Surface Reconstruction on Ternary W x CoB x for Water Oxidation and Zinc–Air Battery Applications