Abstract:<p>The laser direct deposition, one kind of additive manufacturing technologies, was used to produce W‒Cu composite material. To explain the formation of the deposited microstructure, the process of laser-powder interaction and particle transport phenomena during laser direct deposition were investigated through experiment and simulation works. The parameters of the coaxial powder flow (the distribution and the velocity of flying particles) and the particle motion on the melt pool were demonstrated with high-speed imaging. By using these parameters, a laser-powder flow interaction model was established to calculate the laser intensity attenuated by the powder flow and the temperatures of W and Cu particles. Based on the calculated results, a three-phase fluid dynamics model was constructed to simulate the transport phenomena of W and Cu particles on the substrate surface during laser deposition. The calculated results indicate that the temperatures of W and Cu particles were mainly in the solid state but with huge difference in temperature while arriving at the deposition area. The captured images show that these solid particles can be deposited until the substrate surface was slightly melted. The simulation results suggest that the heat of W particles is conducted to Cu particles rapidly after being deposited on the substrate surface. Coupled with the laser irradiation, Cu particles are melted and form a melt pool. Subsequently, a fallen W particle can float on the melt pool since the inertial force of the falling W particle and the surface tension between Cu and W are roughly balanced. In comparison, if a Cu particle falls on a floating W particle, the Cu particle will be melted and then flow into the melt pool in 300 μs. The combination of high-speed imaging and our simulation explained the deposited microstructure, i.e., the distribution of W particles in the deposition layer.</p>

Formation Characterization and Dynamic Mechanism of Underwater Wet Wire and Arc Directed Energy Deposition

Impact of Process Parameters on Forming Quality and Deposition Efficiency of Unsupported Rods in Wire Arc Additive Manufacturing

Investigation on underwater wire-feed laser deposition of 5052 aluminum alloy

Underwater wire-feed laser deposition of the Ti-6Al-4V titanium alloy

Underwater Wire-Feed Laser Deposition of Thin - Walled Tubular Structure of Aluminum Alloy

Pore Formation Mechanism in W–C Hard Coatings Using Directed Energy Deposition on Tungsten Alloy

Fundamental investigation into mass transfer process and microstructural transformation pathways in Ti-6Al-4V via underwater wire-laser directed energy deposition

Drop and hump behaviors in robotic arc-directed energy deposition with vertical position

Characterization of laser-powder interaction and particle transport phenomena during laser direct deposition of W‒Cu composite

Thermal fluid dynamics of the effect of filler wire on deposition rate and bead formation intending plasma arc-based DED

Evolution of melt pool motion and temperature field based on powder scale modeling during laser directed energy deposition process

Comprehensive modeling of transport phenomena in laser hot-wire deposition process

Microstructure and microhardness of aluminium alloy with underwater and in-air wire-feed laser deposition

Enhanced arc erosion resistance via constructing W particle network structure in cold sprayed CuCrZr–W coating: Implication for electromagnetic launching system

Study on the impact of external magnetic field intensity on droplet behaviour, heat build-up and dimensional accuracy in wire-arc DED

Plasma characteristics and material erosion mechanism in multi-channel wire electrical discharge machining

A Net Shape Profile Extraction Approach for Exploring the Forming Appearance of Inclined Thick-Walled Structures by Wire Arc Additive Manufacturing

Influence of ultrasonic vibration on molten pool behavior and deposition layer forming morphology for wire and arc additive manufacturing

Effect of ultrasonic solid-liquid dual-phase conduction on microstructure and properties of Ti-based underwater wet laser deposition layer

Experimental Study on Water Droplet Erosion Resistance of Coatings (ni60 and WC-17Co) Sprayed by APS and HVOF

Characterization of spatter in underwater wet welding by X-ray transmission method