Abstract:A "dual‐layer" coating is fabricated via an in situ conversion strategy, consisting of a VSe2/ZnSe outer layer with low lattice mismatch and a nano metallic V inner layer with corrosion resistance. This design not only facilitates interfacial ion transfer and electric field homogenization but also enables planar deposition, thereby achieving reversible and uniform zinc deposition. Owing to the considerable capacity, high safety, and abundant zinc resources, zinc‐ion batteries (ZIBs) have been garnering much attention. Nonetheless, the unsatisfactory cyclic lifespan and poor reversibility originate from side reactions and dendrite obstacles to their practical applications. In addition to inhibiting the corrosion of aqueous electrolytes, regulating planar deposition is a key strategy to enhance their long‐term stability. Herein, an in situ conversion strategy is reported to construct a protective "dual‐layer" structure (VZSe/V@Zn) on zinc metal, consisting of the VSe2‐ZnSe outer layer with low lattice mismatch to Zn (002) plane, and corrosion‐resistant nanometallic V inner layer. Such design integrates superior interfacial ionic/electronic transfer, corrosion resistance, and unique planar deposition regulation capability. The as‐prepared VZSe/V@Zn demonstrates remarkable durability of 238 h at 50 mA cm−2 with a high depth of discharge (68.3% DOD) in the Zn||Zn symmetric cell. Even in the anode‐free system, the as‐prepared protective layer can extend the cycle life up to 2000 cycles, with an outstanding capacity retention of 93.1% and ultra‐high average coulombic efficiency of 99.998%. This work delineates an effective strategy for fabricating lattice‐matching protective layers, with profound implications for elucidating zinc deposition mechanisms and paving the way for the development of high‐performance zinc batteries.

Deposition of Horizontally Stacked Zn Crystals on Single Layer 1T‐VSe<sub>2</sub> for Dendrite‐Free Zn Metal Anodes

Epitaxial Deposition of Zn (002) for Stable Zinc Metal Anodes

Assembly of Metal–Organic Chemical Conversion Layers As Ion Sieves along with Exposing Zn(002) Planes for Stable Zn Metal Anode

Achieving the Dendrite‐Free Zn Anode by Inducing the (101)‐Preferred Electrodeposition of Zn Crystals

Dendrites‐Free Zn Metal Anodes Enabled by an Artificial Protective Layer Filled with 2D Anionic Nanosheets

Anti-corrosive Cellulose Nanocrystal/Carbon Nanotube Derived Zn Anode Interface for Dendrite-Free Aqueous Zn-ion Batteries

Fast and Regulated Zinc Deposition in a Semiconductor Substrate toward High‐Performance Aqueous Rechargeable Batteries

Phase engineering of ZnSe by small molecules as a high-performance protective layer for Zn anode

Planar Deposition via In Situ Conversion Engineering for Dendrite‐Free Zinc Batteries

Dendrite-free Zn anode enabled by combining carbon nanoparticles hydrophobic layer with crystal face reconstruction toward high-performance Zn-ion battery

Interfacial Manipulation via In Situ Grown ZnSe Cultivator toward Highly Reversible Zn Metal Anodes

Manipulating the Zinc Deposition Behavior in Hexagonal Patterns at the Preferential Zn (100) Crystal Plane to Construct Surficial Dendrite‐Free Zinc Metal Anode

Crystal Step‐Induced Uniform and Rapid Deposition on Zinc Anodes

Single [0001]-oriented zinc metal anode enables sustainable zinc batteries

Achieving Ultrahigh‐Rate Planar and Dendrite‐Free Zinc Electroplating for Aqueous Zinc Battery Anodes

Ultrathin VSe 2 Nanosheets with Fast Ion Diffusion and Robust Structural Stability for Rechargeable Zinc‐Ion Battery Cathode

Metallic Particles‐Induced Surface Reconstruction Enabling Highly Durable Zinc Metal Anode

Ultraconformal Horizontal Zinc Deposition toward Dendrite‐Free Anode

Selective Shielding of the (002) Plane Enabling Vertically Oriented Zinc Plating for Dendrite‐Free Zinc Anode

3D hierarchical graphene matrices enable stable Zn anodes for aqueous Zn batteries

Interface engineering via in-situ electrochemical induced ZnSe for a stabilized zinc metal anode