Abstract:<div class="abstract-group"> <section class="article-section article-section__abstract" lang="en" data-lang="en" id="section-1-en"> <h3 class="article-section__header main abstractlang_en main">Summary</h3> <div class="article-section__content en main"> <p>A core design of small modular liquid‐metal fast reactor (SMLFR) cooled by lead‐bismuth eutectic (LBE) was developed for power reactors. The main design constraint on this reactor is a size constraint: The core needs to be small enough so that (1) it can be transported in a spent nuclear fuel (SNF) cask to meet the electricity demands in remote areas and off‐grid locations or so that (2) it can be used as a power source on board of nuclear icebreaker ships. To satisfy this design requirement, the active core of the reactor is 1 m in height and 1.45 m in diameter. The reactor is fueled with natural and 13.86% low‐enriched uranium nitride (UN), as determined through an optimization study. The reactor was designed to achieve a thermal power of 37.5 MW with an assumption of 40% thermal efficiency by employing an advanced energy conversion system based on supercritical carbon dioxide (S‐CO<sub>2</sub>) as working fluid, in which the Brayton cycle can achieve higher conversion efficiencies and lower costs compared to the Rankine cycle. The outer region of the core with low‐enriched uranium (LEU) performs the function of core ignition. The center region plays the role of a breeding blanket to increase the core lifetime for long cycle operation. The core working fluid inlet and outlet temperatures are 300°C and 422°C, respectively. The primary coolant circulation is driven by an electromagnetic pump. Core performance characteristics were analyzed for isotopic inventory, criticality, radial and axial power profiles, shutdown margins (SDM), reactivity feedback coefficients, and integral reactivity parameters of the quasi‐static reactivity balance. It is confirmed through depletion calculations with the fast reactor analysis code system Argonne Reactor Computation (ARC) that the designed reactor can be operated for 30 years without refueling. Preliminary thermal‐hydraulic analysis at normal operation is also performed and confirms that the fuel and cladding temperatures are within normal operation range. The safety analysis performed with the ARC code system and the UNIST Monte Carlo code MCS shows that the conceptual core is favorable in terms of self‐controllability, which is the first step towards inherent safety. </p>

Conceptual Design and Its Optimization of an Air-Cooled Nuclear Reactor Considering Both Thermal and Neutronic Performance

Coupled neutronics and thermal-hydraulics transient simulation of a gas-cooled reactor in the aircraft nuclear propulsion system

Thermal Analysis of a High-Efficiency Internally-Cooled Strut Injector for Scramjet Engine

Development of a Hybrid Cfd-Ann Method with Multi-Objective Optimization for Airfoil-Finned Pche Used in Gen-Iv Nuclear Systems

Design of a He-Xe Gas-Cooled Nuclear Microreactor System Based on Detailed Models of the Cycle Components

Mass and efficiency optimization of a He-Xe Brayton cycle for mobile, land-based nuclear microreactors

Numerical investigation of thermal stress in the fuel element of high-temperature air-cooled nuclear reactor

Preliminary Lightweight Core Design Analysis of a Micro‐transportable Gas‐cooled Thermal Reactor

Preliminary Conceptual Design with Neutronics and Thermal-Hydraulics Assessments of FuSTAR

Thermal And Electromagnetic Combined Optimization Design Of Dry Type Air Core Reactor

Preliminary Investigation of a Reactors Core Design Optimization.

Novel Nuclear Power and Fossil Fuel Hybrid Propulsion Systems for Long-Endurance Unmanned Aerial Vehicles: Configuration Comparison and Performance Optimization

Core design of long‐cycle small modular lead‐cooled fast reactor

Conceptual Design and Feasibility Analysis of a Megawatt Level Low Enriched Uranium Heat Pipe Cooled Reactor Core

Optimization Analysis of Nuclear Thermal Coupling for a Small Nuclear Thermal Propulsion (sntp) Reactor

A Novel Approach of Designing Aircraft Heat Exchanger for Continuous Working Conditions Using Modified Genetic Algorithm

Design and optimization of intermediate heat exchanger for lead-bismuth cooled fast reactor coupled with supercritical carbon dioxide Brayton cycle

Neutronics and Thermal Hydraulics Analysis of a Conceptual Ultra-High Temperature MHD Cermet Fuel Core for Nuclear Electric Propulsion

Neutronics Characteristics Study of Conceptual Space Heat-Pipe-Cooled Fast Reactor Core

The Core Design Modifications for Stirling Thermal-Electric Integrated Micro Reactor

Conceptual design of a supercritical water reactor with double-row-rod assembly