Editorial: Heterogeneous Catalysis for Methane Activation

Juanjuan Liu,Shihui Zou,Yun Liu,Jie Fan

DOI: https://doi.org/10.3389/fchem.2022.962033

IF: 5.5

2022-01-01

Frontiers in Chemistry

Abstract:EDITORIAL article Front. Chem., 23 June 2022Sec. Catalysis and Photocatalysis https://doi.org/10.3389/fchem.2022.962033

What problem does this paper attempt to address?

Recent Advances in Catalysts for Methane Combustion

Jinghuan Chen,Hamidreza Arandiyan,Xiang Gao,Junhua Li

DOI: https://doi.org/10.1007/s10563-015-9191-5

2015-08-09

Catalysis Surveys from Asia

Abstract:This invited review highlights recent progress in the various classes of heterogeneous catalysts for methane combustion. These combustion catalysts provide a high-efficiency, clean energy source for natural gas vehicles and power plants. This review examines bimetallic systems, and a variety of oxides including single metal oxides, perovskites, spinels, and hexaaluminates. Noble metal mixed oxides exhibit superior catalytic activity due material-specific supports, additives, preparation methods, poisoning, regeneration and surface structure. Kinetic aspects, mechanisms, and the latest studies concerning density functional theory modelling are discussed in conjunction with particle oxidation/reduction mechanisms. The extensive background knowledge on the methane combustion reaction provided by this review provides guidance for researchers with interests ranging from the field of heterogeneous catalysis to the engineering of new high performance materials in environmental and chemical engineering.Graphical Abstract

chemistry, physical
Methane activation: the past and future

pei tang,qingjun zhu,zhaoxuan wu,ding ma

DOI: https://doi.org/10.1039/c4ee00604f

IF: 32.5

2014-01-01

Energy & Environmental Science

Abstract:The conversion of methane to more valuable chemicals is one of the most intensively studied topics in catalysis. The direct conversion of methane is attractive because the process is simple, but unfortunately its products are chemicals that are more reactive than methane. The current status of this research field is discussed with an emphasis on C-H bond activation and future challenges.
Heterogeneous catalysis of methane hydroxylation with nearly total selectivity under mild conditions

Geqian Fang,Wenjun Yu,Xiaodong Wang,Jian Lin

DOI: https://doi.org/10.1039/d4cc02802c

IF: 4.9

2024-09-11

Chemical Communications

Abstract:The efficient utilization of methane, a vital component of natural gas, shale gas and methane hydrate, holds significant importance for global energy security and environmental sustainability. However, converting methane into value-added oxygenates presents a formidable challenge due to its inert nature. Direct selective oxidation of methane (DSOM) under mild conditions is essential for reducing energy consumption and carbon emissions compared with traditional indirect routes. Achieving total selectivity in methane hydroxylation remains elusive due to the competitive CO 2 formation. This feature article highlights recent advancements in methane hydroxylation using thermo-, photo-, and electro-catalytic systems. Through strategically designing the structure of catalysts to control the reactive oxygen species and optimizing reaction parameters, significant progress has been made in enhancing oxygenate selectivity and minimizing overoxidation. A comprehensive understanding of the mechanisms underlying methane hydroxylation with total selectivity offers insights for improving catalyst design and reaction parameter optimization, promoting sustainable methane utilization.

chemistry, multidisciplinary
In-situ exploration of divergent methane coupling pathways in dry and aqueous environments on silver and palladium heteropolyacid-titania photocatalysts

Yinghao Wang,Chunyang Dong,Di Hu,Renata Tokarz-Sobieraj,Dorota Rutkowska-Zbik,Karima Ben Tayeb,Ahmed Addad,Vladislav Butenko,Ernesto de la Torre Miranda,My Nghe Tran,Pardis Simon,Olga Safonova,Valerie Briois,Vitaly V. Ordomsky,Andrei Y. Khodakov

DOI: https://doi.org/10.1016/j.apcatb.2024.124400

IF: 24.319

2024-07-19

Applied Catalysis B Environmental

Abstract:Methane, abundant but inert, contributes significantly to greenhouse gases, primarily through combustion, which emits vast amounts of CO 2 . Photocatalytic methane coupling at ambient temperature offers a method to convert it into ethane, a more versatile hydrocarbon. This study examines selective methane-to-ethane coupling using heterogeneous photocatalysts comprising silver and palladium salts dispersed on titania. Through a combination of ex-situ and in-situ techniques along with DFT simulations, distinct mechanisms and active phases in these catalysts are revealed. In silver catalysts, dispersed cationic Ag + species are crucial for methane activation, while in palladium catalysts, palladium primarily exists in metallic form during coupling. Water strongly enhances coupling rates with both catalysts. DFT modeling identified methane adsorption sites, suggesting methane activation via •OH radicals, experimentally supported by EPR under in-situ conditions.

chemistry, physical,engineering, chemical, environmental
High Efficiency and Selectivity Catalyst for Photocatalytic Oxidative Coupling of Methane

Qijun Tang,Wenguang Tu,Yong Zhou,Zhigang Zou

DOI: https://doi.org/10.1016/j.cjsc.2023.100170

IF: 0.847

2023-01-01

Chinese journal of structural chemistry

Abstract:Methane(CH4)holds great promise in replacing oil as a building block for chemical commodities[1].However,due to the low-polar na-ture and high C-H bond energy(439 kJ/mol)of CH4,the conversion of CH4 by traditional thermocatalysis requires harsh reaction conditions(e.g.high temperature and high pressure)and thus,is energy-consuming[2].To be worse,the production of undesired products like CO2 is un-avoidable as a result of hydrocarbon combustion reactions[2].
PROGRESS IN STUDY OF THE CATALYSTS FOR METHANE ACTIVATION AND CONVERSION

Xiaohong Wang,Wei Huang,Kechang Xie

DOI: https://doi.org/10.3969/j.issn.1004-4248.2001.01.006

2001-01-01

Abstract:A comprehensive review is carried out on some important ways about the activation and conversion of methane which include the reforming of methane with carbon dioxide, the oxidative coupling of methane and the homologation of methane. The recent progress in the catalysts study and the catalitic mechenism are analized. The factors affecting the reactivity of those catalysts are also illustrated. And a new way of methane conversion is probed.
Conversion of Methane into Liquid Fuels—Bridging Thermal Catalysis with Electrocatalysis

Shuai Yuan,Yanding Li,Jiayu Peng,Ydna M. Questell‐Santiago,Karthik Akkiraju,Livia Giordano,Daniel J. Zheng,Sujay Bagi,Yuriy Román‐Leshkov,Yang Shao‐Horn

DOI: https://doi.org/10.1002/aenm.202002154

IF: 27.8

2020-09-27

Advanced Energy Materials

Abstract:The direct partial oxidation of methane to methanol promises an energy‐efficient and environmental‐friendly utilization of natural gas. Unfortunately, current technologies confront a grand challenge in catalysis, particularly in the context of distributed sources. Research has been focused on the design of homogenous and heterogenous catalysts to improve the activation of methane under thermal and electrochemical conditions. However, the intrinsic relationship between thermal and electrochemical systems has not been exploited yet. This review intends to bridge the studies of thermal and electrochemical catalysts, in both homogenous and heterogenous systems, for methane activation from a mechanistic point of view. It is expected to provide a framework to rationalize the design of electrocatalysts beyond the state of art. First, methane activation systems reported previously are reviewed and classified into two basic mechanisms: dehydrogenation and deprotonation. Based on the mechanism types, activity and selectivity descriptors are defined to understand the performance of current catalysts and guide the design of future catalysts. Moreover, methods to enhance the activity and selectivity are discussed to emphasize the unique advantage of electrocatalysis in overcoming the limitations of traditional thermal catalysis. Finally, immense opportunities and challenges for catalyst design are discussed by unifying thermal and electrochemical catalysis.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Advances and Challenges of Photocatalytic Methane C—C Coupling

Xueyuan Wang,Nengchao Luo,Feng Wang

DOI: https://doi.org/10.1002/cjoc.202200028

IF: 5.56

2022-04-06

Chinese Journal of Chemistry

Abstract:Chinese Journal of Chemistry, Accepted Article.

chemistry, multidisciplinary
Advances in Methanation Catalysis

Hao Wang,Yan Pei,Minghua Qiao,Baoning Zong

DOI: https://doi.org/10.1039/9781788010634-00001

2017-01-01

Abstract:The hydrogenation of CO to CH4, the CO methanation reaction, has attracted considerable attention due to energy and environment concerns. The reaction is thermodynamically favourable, however, the catalyst should show appreciable activity and durability in this highly exothermic reaction. This chapter focuses on recent advances in methanation catalysis, addressing on the roles of the metals, supports, promoters, the reaction and deactivation mechanisms, and the reactor types, with the aim to provide a foundation for the rational design of CO methanation catalysts and processes that enables the production of synthetic natural gas (SNG) in a more economic and greener manner.
Highly Efficient and Selective Photocatalytic Nonoxidative Coupling of Methane to Ethylene over Pd-Zn Synergistic Catalytic Sites

Yanduo Liu,Yihong Chen,Wenbin Jiang,Tingting Kong,Pedro H. C. Camargo,Chao Gao,Yujie Xiong

DOI: https://doi.org/10.34133/2022/9831340

IF: 11

2022-11-09

Research

Abstract:Photocatalytic nonoxidative coupling of CH 4 to multicarbon (C 2+ ) hydrocarbons (e.g., C 2 H 4 ) and H 2 under ambient conditions provides a promising energy-conserving approach for utilization of carbon resource. However, as the methyl intermediates prefer to undergo self-coupling to produce ethane, it is a challenging task to control the selective conversion of CH 4 to higher value-added C 2 H 4 . Herein, we adopt a synergistic catalysis strategy by integrating Pd-Zn active sites on visible light-responsive defective WO 3 nanosheets for synergizing the adsorption, activation, and dehydrogenation processes in CH 4 to C 2 H 4 conversion. Benefiting from the synergy, our model catalyst achieves a remarkable C 2+ compounds yield of 31.85 μ mol·g -1 ·h -1 with an exceptionally high C 2 H 4 selectivity of 75.3% and a stoichiometric H 2 evolution. In situ spectroscopic studies reveal that the Zn sites promote the adsorption and activation of CH 4 molecules to generate methyl and methoxy intermediates with the assistance of lattice oxygen, while the Pd sites facilitate the dehydrogenation of methoxy to methylene radicals for producing C 2 H 4 and suppress overoxidation. This work demonstrates a strategy for designing efficient photocatalysts toward selective coupling of CH 4 to higher value-added chemicals and highlights the importance of synergistic active sites to the synergy of key steps in catalytic reactions.

multidisciplinary sciences
Electrocatalytic and Photocatalytic CO2 Methanation: From Reaction Fundamentals to Catalyst Developments

Junbo Tian,Wenqing Xu,Jiajian Gao,Tingyu Zhu,Guangwen Xu,Ziyi Zhong,Fabing Su

DOI: https://doi.org/10.1002/cctc.202301406

IF: 4.5

2024-01-07

ChemCatChem

Abstract:Transitioning from fossil fuels to renewable energy sources is demanded due to the gradual depletion of petroleum oil/gas and the environmental impact of carbon dioxide (CO2) emissions into the atmosphere. Electrocatalytic and photocatalytic CO2 reduction to methane (CH4) using renewable energy sources is crucial for sustainable chemical/fuel production and greenhouse gas reduction. In recent years, extensive research has focused on understanding the fundamental aspects of the two approaches, such as reaction mechanisms and active sites, and exploring/designing novel catalytic materials. This review initially discusses the reaction fundamentals, including performance evaluation indexes, reactors, and mechanisms, to understand the catalytic reactions. Subsequently, various catalyst preparation strategies and characterization methods are summarized, trying to outline the catalyst design principle based on the obtained understanding of the reaction mechanisms. Finally, research challenges and perspectives for future development in this area are discussed and presented. It is expected to provide a comprehensive understanding of the photo/electrocatalytic CO2 methanation, valuable knowledge to novice researchers, and a helpful reference for future research endeavors.

chemistry, physical
Catalytic Combustion of Methane: From Mechanism and Materials Properties to Catalytic Performance

Ziyu Tang,Tao Zhang,Decun Luo,Yongjie Wang,Zhun Hu,Ralph T. Yang

DOI: https://doi.org/10.1021/acscatal.2c03321

IF: 12.9

2022-10-19

ACS Catalysis

Abstract:Catalytic combustion of methane is a promising way of eliminating fugitive methane emissions to meet the rising requirement of the wide application of natural gas vehicles. The performance of catalysts for methane combustion has been found to be significantly affected by the variety of lattice defects, oxygen vacancies, and metal–support interactions which are connected with the category, morphology, and crystal type of both active components and supports. Choices of additives and preparation methods also play important roles in the catalytic combustion of methane. In this Review, we highlight the recent progress in the development and understanding of catalytic combustion of methane. Distinct mechanisms regarding catalytic combustion of methane, including the Langmuir–Hinshelwood mechanism, the Eley–Rideal mechanism, and the Mars–van Krevelen mechanism, are first discussed. The effects of active components, supports, additives, and preparation methods on the properties of catalysts for methane combustion are then analyzed. From a practical point of view, the effects of the components of exhaust gas, which include carbon dioxide, water, sulfur compounds, and nitrogen-containing compounds, are also discussed. Finally, we provide a summary regarding the current situation and future prospects for the catalytic combustion of methane.

chemistry, physical
Heterogeneous Droplet Catalyst for Selective Oxidation of Methane

Yuen Wu,Haoran Zhang,Xiaoqian Wang,Fan Wu,Xiao-Kang Liu,Chunrong Ma,Xiao Han,Yihua Ran,Yan Zhang,Zhiwen Zhang,Guozhen Zhang,Xiyu Li,Jun Cai,Xun Hong,Zhi Liu,Jun Jiang,Tao Yao,Henny Bouwmeester

DOI: https://doi.org/10.21203/rs.3.rs-265347/v1

2021-01-01

Abstract:Abstract Solid catalysts play vital roles as heterogeneous catalysts in numerous applications in the chemical, petrochemical, pharmaceutical, energy, food and automobile industries, facilitating large-scale production and facile product separation. However, conventional heterogeneous catalysts possess three major shortcomings that hinder their wide-spread application, including i) inferior catalytic activity and selectivity caused by a diversity of active sites, ii) tendency towards deactivation caused by agglomeration of catalyst particles, and iii) undesired carbon deposition in transformation of hydrocarbons. 1-4 In this research, we present a new kind of heterogeneous catalyst that consists of a liquid metal with dissolved catalytically active metal atoms, denoted as a heterogeneous droplet catalyst (HDC). Taking galinstan as the liquid metal with Cu as catalytically active metal solute (denoted as Cu-HDC) as an example, we demonstrate that the dissolved Cu atoms promote selective oxidation of methane into primary oxygenates at room temperature with a superb activity of 1940 mmol·gCu-1·h-1 and a selectivity of over 90%, outperforming state-of-the-art industrial catalysts. The liquid metal solvent ensures a high, entropically driven dispersion of the Cu atoms and prevents carbon deposition. The highly promising Cu-HDC catalyst shows a stable operation over 240 hours. By employing in-situ X-ray absorption spectroscopy (XAS), near ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS) and density functional theory (DFT), we show that the narrow d-orbital of the dissolved Cu atoms in HDC facilitates formation of adsorbed methyl radicals *CH3 and impedes their transformation into *CH2 (where the * notation is used to denote an adsorption site) 5,6. These features enhance the selectivity towards primary oxygenates and prevent over-oxidization and formation of C2+ products. As the phase of the HDC is different from those of gas, aqueous and organic solution phases its separation is as facile as that of solid catalysts. Unlike conventional supported catalysts that are designed with well-defined crystal structures, crystal facets and defects, HDCs are characterized by weak interactions between the liquid metal support and the active metal solute, by having mobile surfaces and by dynamic catalytically active centers. These unprecedented features endow HDCs unique adsorption behavior and adaptive activation of molecules. For this reason, HDCs have the potential to become a major category of catalysts in the field of heterogeneous catalysis.
Recent Advances in the Catalytic Conversion of Methane to Methanol: From the Challenges of Traditional Catalysts to the Use of Nanomaterials and Metal-Organic Frameworks

Seyed Alireza Vali,Ahmad Abo Markeb,Javier Moral-Vico,Xavier Font,Antoni Sánchez

DOI: https://doi.org/10.3390/nano13202754

IF: 5.3

2023-10-13

Nanomaterials

Abstract:Methane and carbon dioxide are the main contributors to global warming, with the methane effect being 25 times more powerful than carbon dioxide. Although the sources of methane are diverse, it is a very volatile and explosive gas. One way to store the energy content of methane is through its conversion to methanol. Methanol is a liquid under ambient conditions, easy to transport, and, apart from its use as an energy source, it is a chemical platform that can serve as a starting material for the production of various higher-value products. Accordingly, the transformation of methane to methanol has been extensively studied in the literature, using traditional catalysts as different types of zeolites. However, in the last few years, a new generation of catalysts has emerged to carry out this transformation with higher conversion and selectivity, and more importantly, under mild temperature and pressure conditions. These new catalysts typically involve the use of a highly porous supporting material such as zeolite, or more recently, metal-organic frameworks (MOFs) and graphene, and metallic nanoparticles or a combination of different types of nanoparticles that are the core of the catalytic process. In this review, recent advances in the porous supports for nanoparticles used for methane oxidation to methanol under mild conditions are discussed.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
PdCu nanoalloy decorated photocatalysts for efficient and selective oxidative coupling of methane in flow reactors

Xiyi Li,Chao Wang,Jianlong Yang,Youxun Xu,Yi Yang,Jiaguo Yu,Juan J. Delgado,Natalia Martsinovich,Xiao Sun,Xu-Sheng Zheng,Weixin Huang,Junwang Tang

DOI: https://doi.org/10.1038/s41467-023-41996-y

IF: 16.6

2023-10-11

Nature Communications

Abstract:Methane activation by photocatalysis is one of the promising sustainable technologies for chemical synthesis. However, the current efficiency and stability of the process are moderate. Herein, a PdCu nanoalloy (~2.3 nm) was decorated on TiO 2 , which works for the efficient, stable, and selective photocatalytic oxidative coupling of methane at room temperature. A high methane conversion rate of 2480 μmol g −1 h −1 to C 2 with an apparent quantum efficiency of ~8.4% has been achieved. More importantly, the photocatalyst exhibits the turnover frequency and turnover number of 116 h −1 and 12,642 with respect to PdCu, representing a record among all the photocatalytic processes (λ > 300 nm) operated at room temperature, together with a long stability of over 112 hours. The nanoalloy works as a hole acceptor, in which Pd softens and weakens C-H bond in methane and Cu decreases the adsorption energy of C 2 products, leading to the high efficiency and long-time stability.

multidisciplinary sciences
Catalytic Methane Removal to Mitigate Its Environmental Effect

Chao Wang,Youxun Xu,Junwang Tang

DOI: https://doi.org/10.1007/s11426-022-1487-8

2023-01-01

Science China Chemistry

Abstract:Large reserve of methane, in the form of natural gas and methane hydrate, has been discovered and it has been intensively used as a fuel, or as a building block for the chemical synthesis. However, severe environmental and climatic issues caused by the leakage of methane during the production, transportation and use of methane are overlooked. This offers incentives for the catalytic removal of methane. Nevertheless, due to the inert nature of methane molecules, the activation of methane via thermocatalysis requires harsh reaction conditions. The high reaction temperature not only increases the capital cost but also accelerates the deactivation of catalysts due to sintering and/or coking. The development of robust and stable catalysts with a low operating temperature has become the focus of the research on thermocatalytic methane oxidation. Photocatalysis, which uses the energy of photons instead of heat to drive chemical reactions under ambient conditions, offers another approach to methane removal. This review will cover the development of high-efficiency catalysts for methane combustion in both thermo- and photocatalysis. Moreover, the fundamental understanding of the active sites, surface chemistry and reaction pathway will also be discussed. Finally, the challenges facing in the catalytic removal of methane will be summarized and potential solutions will be provided. This review will be of interest to researchers in the field of heterogeneous catalysis, materials design, and chemical engineering.
Pd-Modified ZnO–Au Enabling Alkoxy Intermediates Formation and Dehydrogenation for Photocatalytic Conversion of Methane to Ethylene

Wenbin Jiang,Jingxiang Low,Keke Mao,Delong Duan,Shuangming Chen,Wei Liu,Chih-Wen Pao,Jun Ma,Shuaikang Sang,Chang Shu,Xiaoyi Zhan,Zeming Qi,Hui Zhang,Zhi Liu,Xiaojun Wu,Ran Long,Li Song,Yujie Xiong

DOI: https://doi.org/10.1021/jacs.0c10369

IF: 15

2020-12-29

Journal of the American Chemical Society

Abstract:Photocatalysis provides an intriguing approach for the conversion of methane to multicarbon (C2+) compounds under mild conditions; however, with methyl radicals as the sole reaction intermediate, the current C2+ products are dominated by ethane, with a negligible selectivity toward ethylene, which, as a key chemical feedstock, possesses higher added value than ethane. Herein, we report a direct photocatalytic methane-to-ethylene conversion pathway involving the formation and dehydrogenation of alkoxy (i.e., methoxy and ethoxy) intermediates over a Pd-modified ZnO–Au hybrid catalyst. On the basis of various in situ characterizations, it is revealed that the Pd-induced dehydrogenation capability of the catalyst holds the key to turning on the pathway. During the reaction, methane molecules are first dissociated into methoxy on the surface of ZnO under the assistance of Pd. Then these methoxy intermediates are further dehydrogenated and coupled with methyl radical into ethoxy, which can be subsequently converted into ethylene through dehydrogenation. As a result, the optimized ZnO–AuPd hybrid with atomically dispersed Pd sites in the Au lattice achieves a methane conversion of 536.0 μmol g–1 with a C2+ compound selectivity of 96.0% (39.7% C2H4 and 54.9% C2H6 in total produced C2+ compounds) after 8 h of light irradiation. This work provides fresh insight into the methane conversion pathway under mild conditions and highlights the significance of dehydrogenation for enhanced photocatalytic activity and unsaturated hydrocarbon product selectivity.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/jacs.0c10369?goto=supporting-info">https://pubs.acs.org/doi/10.1021/jacs.0c10369</a>.Detailed experimental procedures, characterization methods, and additional characterization of materials (<a class="ext-link" href="/doi/suppl/10.1021/jacs.0c10369/suppl_file/ja0c10369_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

chemistry, multidisciplinary
(Invited, Digital Presentation) Methane Conversion to High Value Chemicals by Photocatalysis

Junwang Tang

DOI: https://doi.org/10.1149/ma2022-02481815mtgabs

2022-01-01

Abstract:As underlined in the COP26, methane as a greenhouse gas is nearly 80 time more potent than CO2 while its reserve is much more than the sum of coal, oil and natural gas. Thus methane conversion not only involves the environmental issue but also is related to high-value chemical production /clean energy supply, which has been attracting substantial interest over the last decades. However CH4 activation is energy intensive and kinetically very challenging so that methane activation is regarded as the “holy grail” in the catalytically chemical process. [1] Photocatalysis provides a cost efficient potential to activation of such small molecule under very mild conditions, while to achieve the potential is a huge challenge.[2] Stimulated by our research outcomes on the charge dynamics in inorganic semiconductor photocatalysis, which reveal that the low reaction efficiency is due to both fast charge recombination and large bandgap of an inorganic semiconductor [3,4], together with the recent findings on atomic catalysis [5], we developed novel material strategies for photocatalytic methane conversion to methanol. Highly dispersed atomic level iron species immobilised on a TiO2 photocatalyst show an excellent activity for methane conversion, resulting into ~97% selectivity towards alcohols operated under ambient conditions by a one-step chemical process [6]. Such photocatalyst is also very stable, promising an attractive industrial process of methane upgrade. The dominating function of the iron species has also been investigated in detail. Furthermore, we designed a flow system for relatively efficient methane to C2, achieving the benchmark results in this area.[7] In addition, C1 oxygenates can be produced with nearly 100% by photocatalytic methane conversion due to the synergy between Au and Cu cocatalysts loaded on ZnO.[8] References ： Li, X. Wang, C., Tang, J. Nature Reviews Materials , 2022, Doi: 1038/s41578-022-00422-3. Wang Y., Suzuki H., Xie, J., Tomita, O., Martin, D. J., Higashi, M., Kong, D., Abe R. Tang, J., Chem. Rev., 2018, 118: 5201-5241. Tang, J. Durrant J. R., Klug, R ., J. Am. Chem. Soc ., 2008, 130(42) : 13885-13891. Miao, T., Wang, C., Xiong, L., Li, X., Xie, X., Tang, J., ACS Catalysis , 2021, 11, 8226-8238. Wang, A. Li J., Zhang. T., Nat . Rev. Chem ., 2018, 2; 65-81. Xie, J., Jin, R. ,Li, A., Bi, Y., Sankar, G. , Ma , Tang, J. Nature Catalysis , 2018, 1: 889-896. Li, X., Xie J.,Rao, H., Wang, , Tang, J., Angewandte Chemie International Edition , 2020, 132: 19870-19875. Luo, L., Gong, Z., Xu, Y., Ma, J., Liu, H., Xing, J., Tang, J., Journal of the American Chemical Society , 2022, 144, 2, 740–750.
Editorial: Recent Development of Nanocatalysts for Hydrogen Production

Quanbing Liu,Lijun Yang,Sheng Chen,Bruno G. Pollet,Hao Li

DOI: https://doi.org/10.3389/fchem.2020.00576

IF: 5.5

2020-01-01

Frontiers in Chemistry

Abstract:EDITORIAL article Front. Chem., 09 July 2020 | https://doi.org/10.3389/fchem.2020.00576
A selective Au-ZnO/TiO2 hybrid photocatalyst for oxidative coupling of methane to ethane with dioxygen

Shuang Song,Hui Song,Luming Li,Shengyao Wang,Wei Chu,Kang Peng,Xianguang Meng,Qi Wang,Bowen Deng,Qianxia Liu,Zhuan Wang,Yuxiang Weng,Huilin Hu,Huiwen Lin,Tetsuya Kako,Jinhua Ye

DOI: https://doi.org/10.1038/s41929-021-00708-9

IF: 37.8

2021-11-29

Nature Catalysis

Abstract:Direct oxidation of methane to valuable chemicals is a great challenge as catalysts with both high activity and selectivity for the activation of inert C–H bonds are required. Here, we report the highly efficient and selective photo-oxidation of methane to ethane with dioxygen in a flow reactor using a Au nanoparticle (NP) loaded ZnO/TiO2 hybrid. An ethane production rate of over 5,000 μmol g−1 h−1 with 90% selectivity is achieved, which is more than one order of magnitude higher than the state-of-the-art photocatalytic systems. Detailed characterizations and theoretical studies show that the formation of heterojunctions between ZnO and TiO2 leads to enhanced photocatalytic activity, while maintaining high selectivity owing to the weak overoxidation ability of the main component ZnO. Moreover, the Au cocatalyst enables the facile desorption of methyl (CH3) species as •CH3 radicals in the gas phase, thereby facilitating C2H6 formation and inhibiting overoxidation of CH4 to CO2.

chemistry, physical

Editorial: Heterogeneous Catalysis for Methane Activation

Recent Advances in Catalysts for Methane Combustion

Methane activation: the past and future

Heterogeneous catalysis of methane hydroxylation with nearly total selectivity under mild conditions

In-situ exploration of divergent methane coupling pathways in dry and aqueous environments on silver and palladium heteropolyacid-titania photocatalysts

High Efficiency and Selectivity Catalyst for Photocatalytic Oxidative Coupling of Methane

PROGRESS IN STUDY OF THE CATALYSTS FOR METHANE ACTIVATION AND CONVERSION

Conversion of Methane into Liquid Fuels—Bridging Thermal Catalysis with Electrocatalysis

Advances and Challenges of Photocatalytic Methane C—C Coupling

Advances in Methanation Catalysis

Highly Efficient and Selective Photocatalytic Nonoxidative Coupling of Methane to Ethylene over Pd-Zn Synergistic Catalytic Sites

Electrocatalytic and Photocatalytic CO2 Methanation: From Reaction Fundamentals to Catalyst Developments

Catalytic Combustion of Methane: From Mechanism and Materials Properties to Catalytic Performance

Heterogeneous Droplet Catalyst for Selective Oxidation of Methane

Recent Advances in the Catalytic Conversion of Methane to Methanol: From the Challenges of Traditional Catalysts to the Use of Nanomaterials and Metal-Organic Frameworks

PdCu nanoalloy decorated photocatalysts for efficient and selective oxidative coupling of methane in flow reactors

Catalytic Methane Removal to Mitigate Its Environmental Effect

Pd-Modified ZnO–Au Enabling Alkoxy Intermediates Formation and Dehydrogenation for Photocatalytic Conversion of Methane to Ethylene

(Invited, Digital Presentation) Methane Conversion to High Value Chemicals by Photocatalysis

Editorial: Recent Development of Nanocatalysts for Hydrogen Production

A selective Au-ZnO/TiO2 hybrid photocatalyst for oxidative coupling of methane to ethane with dioxygen