Abstract:As next-generation rechargeable batteries, the development of solid-state lithium-metal batteries (LMBs) in a multitude of applications is confronted with a trade-off between high energy density, safety, and wide-temperature tolerance. Especially in cold climates, their applications are challenged by insufficient dynamics in bulk electrolyte and at electrode/electrolyte interface. Herein, a flexible, highly ionic conductive, and low-temperature applicable quasi-solid polymer electrolyte (QSPE) is designed and fabricated, which achieves a stable Li-metal anode over a wide-temperature range (-20 similar to 60 degrees C). The QSPEs prepared via in-situ polymerization of polyethylene glycol (PEO)-based monomers in low-melting solvent (1,3-dioxolane (DOL) or ethyl difluoroacetate (EDFA)) endow low-temperature tolerance, prominent ionic conductivity (4.5 x 10(-4) S cm(-1) at -20 degrees C) and exceptional electrochemical performance over a wide-temperature range. Consequently, with the DOL-based QSPE (D-QSPE), the Li/D-QSPE/LiFePO4 cell presents stable, long-term cycling at -20 degrees C (minimal capacity degradation over 550 cycles) and excellent fast-charging capacity (capacity retention of 81 % over 1300 cycles at 5 C). Even utilizing a thin lithium foil (25 mu m) and a high mass loading LiFePO4 cathode (2.5 mAh cm(-2)), the assembled Li/LFP cell with a N/P ratio of 1.96 still exhibits good cycling performance at -20 degrees C. Additionally, the EDFA-based QSPE (E-QSPE) allows LMBs with NCM811 cathodes cycling over 140 cycles (capacity retention > 95 %) at -20 degrees C. With the capability of circumventing sluggish ion transport kinetics of quasi-solid polymer LMBs in cold climates, the developed polymer electrolyte provides new pathways for safe, high-capability, and wide-temperature operable batteries.

Quasi-Solid-State Polymer Electrolyte Based on High-Concentrated LiTFSI Complexing DMF for Ambient-Temperature Rechargeable Lithium Batteries

Quasi-Solid-State Polymer Electrolyte Based on Highly Concentrated LiTFSI Complexing DMF for Ambient-Temperature Rechargeable Lithium Batteries

PEO-LITFSI-SiO<sub>2</sub>-SN System Promotes the Application of Polymer Electrolytes in All-Solid-State Lithium-ion Batteries

Polymer dispersed ionic liquid electrolytes with high ionic conductivity for ultrastable solid‐state lithium batteries

Localized High Concentration Polymer Electrolyte Enabling Room Temperature Solid-State Lithium Metal Batteries with Stable LiF-rich Interphases

Lithium-Rich Porous Aromatic Framework-Based Quasi-Solid Polymer Electrolyte for High-Performance Lithium Ion Batteries

Ultrahigh Elastic Polymer Electrolytes for Solid-State Lithium Batteries with Robust Interfaces.

Ultra-Long-Life and Ultrathin Quasi-solid Electrolytes Fabricated by Solvent-free Technology for Safe Lithium Metal Batteries

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries

Highly Conductive Polymeric Ionic Liquid Electrolytes for Ambient-Temperature Solid-State Lithium Batteries.

Ultrathin Thiol-Ene Crosslinked Polymeric Electrolyte for Solid-State and High-Performance Lithium Metal Batteries

A meltblown cloth reinforced partially fluorinated solid polymer electrolyte for ultrastable lithium metal batteries

10 μm‐Thick High‐Strength Solid Polymer Electrolytes with Excellent Interface Compatibility for Flexible All‐Solid‐State Lithium‐Metal Batteries

Novel Li[(Cf3so2)(N-C4f9so2)N]-Based Polymer Electrolytes for Solid-State Lithium Batteries with Superior Electrochemical Performance

Dielectric polymer based electrolytes for high-performance all-solid-state lithium metal batteries

In Situ Polymerization Design of a Quasi-Solid Electrolyte Enhanced by NMP Additive for Lithium Metal Batteries

Single Lithium-Ion Conducting Solid Polymer Electrolyte with Superior Electrochemical Stability and Interfacial Compatibility for Solid-State Lithium Metal Batteries

In-Situ Formation of Quasi-solid Polymer Electrolyte for Wide-Temperature Applicable Li-Metal Batteries

In Situ Fabrication of Solvent-Free Solid Polymer Electrolytes for Wide-Temperature All-Solid-State Lithium Metal Batteries

Solid Electrolyte Based on Waterborne Polyurethane and Poly(ethylene Oxide) Blend Polymer for All-Solid-state Lithium Ion Batteries

Ionic solid-like conductor-assisted polymer electrolytes for solid-state lithium metal batteries