Abstract:Low-temperature operation is a challenge for solid-lithium-metal batteries (LMBs), and insufficient ionic conductivity is the main obstacle. Herein, guided by the molecular dynamics simulations (MDS), a solid polymer electrolyte (SPE) based on poly(1,3-dioxolane) (PDOL) with sufficient ionic conductivity at low temperature is reported. In situ X-ray diffraction (XRD) and differential scanning calorimetry (DSC) tests reveal that the PDOL-based SPE could well maintain amorphous nature at low temperatures, contributing to excellent ionic transport. The MDS analysis of the Li–O coordination environment indicates that more oxygen atoms bonded with Li+ in PDOL than in poly(ethylene oxide) (PEO) at low temperatures, thus we could envision the preponderance of PDOL as a better polymer matrix of SPE for low-temperature solid LMBs. It delivers a high capacity of 103 mAh g–1 and 85% retention for 200 cycles for Li||LiFePO4 at −20 °C, showing great potential for application in low-temperature solid LMBs in cold climates.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c14825.Experimental methods; MDS characterization; SEM image of the low-temperature PDOL SPE on Li foil; TG curves for PDOL polymer and DOL liquid; GPC result for PDOL polymer; in situ XRD patterns; open-circuit voltage (OCV) curve of the assembled PDOL-based Li||LiFePO4 battery; charge/discharge profiles of Li||PI cells; step data from 25 to −40 °C in one PDOL-based Li||LiFePO4 cell; rate performance of Li||LiFePO4 cells at −20 °C; performance of PDOL-based Li||LiFePO4 cell with LiFePO4 loading of 24 mg cm–2 at −20 °C; enlarged polarization voltage of Li||Li batteries at different temperatures in Figure 5a; Nyquist plot of symmetric Li||Li cells at various temperatures; rate performance of symmetric Li||Li cells at −20 and 25 °C; rate performance of PDOL-based Li||LiFePO4 cell at 25 °C; cyclic performances of PDOL-based Li||LiFePO4 batteries at 25 and 50 °C; chronopotentiometry results of PDOL-based SPE at 25 and 50 °C; electrochemical window of the PDOL-based SPE at different temperatures; influence of DADS on the battery performances; cross-sectional SEM image of cycled Li anode; Fourier transform infrared (FTIR) spectra of the DADS monomer and PLAS; X-ray photoelectron spectroscopy (XPS) spectra of the cycled Li anode; and 1H NMR spectra of the DADS monomer and PLAS (PDF)This article has not yet been cited by other publications.

In-Situ Formation of Quasi-solid Polymer Electrolyte for Wide-Temperature Applicable Li-Metal Batteries

In Situ Fabricated Quasi‐Solid Polymer Electrolyte for High‐Energy‐Density Lithium Metal Battery Capable of Subzero Operation

In-situ Generation of Poly(ionic Liquid) Flexible Quasi-Solid Electrolyte Supported by Polyhedral Oligomeric Silsesquioxane/polyvinylidene Fluoride Electrospun Membrane for Lithium Metal Battery

Molecular Simulations Guided Polymer Electrolyte towards Superior Low-Temperature Solid Lithium-Metal Batteries

Polyether‐b‐Amide Based Solid Electrolytes with Well‐Adhered Interface and Fast Kinetics for Ultralow Temperature Solid‐State Lithium Metal Batteries

Bifunctional Solid-State Copolymer Electrolyte with Stabilized Interphase for High-Performance Lithium Metal Battery in a Wide Temperature Range

Bifunctional Solid‐State Copolymer Electrolyte with Stabilized Interface for High Performance Lithium Metal Battery in a Wide Temperature Range

Ultra-Long-Life and Ultrathin Quasi-solid Electrolytes Fabricated by Solvent-free Technology for Safe Lithium Metal Batteries

Manipulating the ionic conductivity and interfacial compatibility of polymer-in-dual-salt electrolytes enables extended-temperature quasi-solid metal batteries

In Situ Fabrication of Solvent-Free Solid Polymer Electrolytes for Wide-Temperature All-Solid-State Lithium Metal Batteries

Quasi-Solid-State Polymer Electrolyte Based on Highly Concentrated LiTFSI Complexing DMF for Ambient-Temperature Rechargeable Lithium Batteries

Wide-Temperature and High-Rate Operation of Lithium Metal Batteries Enabled by an Ionic Liquid Functionalized Quasi-Solid-State Electrolyte

Quasi-Solid-State Polymer Electrolyte Based on High-Concentrated LiTFSI Complexing DMF for Ambient-Temperature Rechargeable Lithium Batteries

Metal‐Organic Coordination Enhanced Metallopolymer Electrolytes for Wide‐Temperature Solid‐State Lithium Metal Batteries

Tailoring polymer electrolyte ionic conductivity for production of low- temperature operating quasi-all-solid-state lithium metal batteries

In Situ Orthogonal Polymerization for Constructing Fast-Charging and Long-Lifespan Li Metal Batteries with Topological Copolymer Electrolytes

Mild and Controllable Solid Electrolyte Interphase Formation for High-Voltage Lithium Metal Batteries in a Wide-Temperature Range from −40 °C to 80 °C

In‐Built Quasi‐Solid‐State Poly‐Ether Electrolytes Enabling Stable Cycling of High‐Voltage and Wide‐Temperature Li Metal Batteries

Localized High Concentration Polymer Electrolyte Enabling Room Temperature Solid-State Lithium Metal Batteries with Stable LiF-rich Interphases

A High-Flash-point Quasi-Solid Polymer Electrolyte for Stable Nickel-Rich Lithium Metal Batteries