Abstract:Purpose This study aims to research the influence mechanism of microtextured geometric parameters of dry gas seal end face on the tribological behavior under dry frictional conditions. Design/methodology/approach The microtexture was processed using laser processing, while the diamond-like carbon (DLC) film was applied through magnetron sputtering; the experimental platform of friction vibration was established, the frictional and vibrational properties of different geometric parameters were tested; the data signals of vibrational acceleration and frictional torque were collected and processed using data acquisition instrument. The entropy characteristic parameters of 3D vibrational acceleration were extracted based on wavelet packet decomposition method. The end-face topography was measured with ST400 three-dimensional noncontact surface topography instrument. Findings The geometry of pits plays a key role in influencing friction performance; the permutation entropy and fuzzy entropy of the vibration acceleration signal changed with variations in microtextured parameters. A textured surface with appropriately size parameters can trap debris, enhance the dynamic pressure effect, reduce impact between the friction interfaces and improve the frictional vibrational performance. In this research, microtextured surface with Φ150 μm-10% and Φ200 μm-5% can effectively reduce friction and vibration between the end faces of a dry gas seal. Originality/value DLC film improves the hardness of seal ring end face, and microtexture improves the dynamic effect; the tribological behavior monitoring can be realized by analyzing the characteristics of vibration acceleration sensitive parameter with friction state. The findings will provide a basis for further research in the field of tribology and the microtexture optimization of dry gas seal ring end face. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0389/

Analytical and Experimental Investigation of Laser-Textured Mechanical Seal Faces

Investigation Into The Performance Of The Vl Seal Based On The 3d Model

Experimental study of two-phase mechanical face Seals with laser surface texturing

Improving Tribological Performance of Mechanical Components by Laser Surface Texturing

Friction and Temperature Reduction in a Mechanical Face Seal by a Surface Texturing: Comparison between TEHD Simulations and Experiments

Theoretical and experimental approach for the characteristics of water-lubricated, high-speed double spiral-groove face seals

Thermo-elasto-hydrodynamic Analysis of Triangular Textured Mechanical Face Seals

State of the Art in Laser Surface Texturing

The effect of surface roughness on thermal-elasto-hydrodynamic model of contact mechanical seals

The Effect of Wear on the Performance of a Rotary Lip Seal

Experimental investigation of the effect of typical surface texture patterns on mechanical seal performance

FULL NUMERICAL SIMULATION TO THE PERFORMANCE OF MICRO-TEXTURED MECHANICAL FACE SEALS

Influence of microtextured parameters of dry gas sealing rings on tribological performance

Influence of diamond-like carbon coatings and micro-texturing on friction and wear of seal interfaces: Experiment and simulation study

Numerical simulation and experimental study of shaft pumping by laser structured shafts with rotary lip seals

Multiscale Structural Mechanics of Rotary Shaft Seals: Numerical Studies and Visual Experiments

Semi Salix Leaf Textured Gas Mechanical Face Seal with Enhanced Opening Performance

An improved mixed lubrication model for revealing the mechanism of high speed and frictional heat on sealing performance

Multi-Physical Field, Coupled, Mixed Lubrication Analysis of Hydraulic Reciprocating Vacuum Lip Seal

Multi-objective optimization of surface texture shape in fluid mechanical face seals using mass-conserving cavitation boundary condition

Sealing performance and optimization design of squamous textured mechanical seal