Abstract:Based on polyhexamethylene guanidine phosphate ( PHMGP )/ ammonium polyphosphate ( APP )/ PHMGP/ potassium alginate ( PA ) -carbon nanotube ( CNT ), a unique quadlayer ( QL ) hybrid organic. inorganic film is built via layer. by. layer self. assembly to protect cotton fabric from fire. Fourier Transform Infrared and Ultraviolet. visible Spectroscopy indicate that PHMGP, APP, PA and CNT respectively grow linearly during the assembly process. Insulation resistance measurement reveals that, because of the cross. linked CNT network formed in assembly coating on fiber, 10 QL coating makes a decrease by orders of magnitude, from 1.8 x 10(10) Omega.cm to 9.1 x 10(4) Omega.cm, in the electrical resistivity of cotton fabric, which implies that the electrical conductivity of cotton has been improved greatly. Characterizations of thermal and combustion behaviors for all fabrics show that QL coating performs an excellent flame retardant effect on cotton, which is stronger than that of PHMGP/ APP bilayer coating ( P/ A ). P/ A coating has stronger catalytic effect on the thermal decomposition of the cotton with respect to the QL coating of equal weight. This can be confirmed by the lower T-5% and T-max1. However, the QL coated fabric shows higher T-max2 and more left residue as compared to the corresponding P/ A coated fabric, indicating the formation of more thermally stable char by the combination of PA. CNT with PHMGP/ APP intumescent system. With increasing quadlayers coated on fabric, the burning time reduces gradually, and afterglow phenomenon disappears as well. Additionally, the coated fabric also leaves more unburned area and residual char with intact structure after combustion. Undeformed fibers are observed in 10 and 20 QL after burning, and numerous small bubbles appear on their residual fiber surfaces, indicating the formation of abundant expansion char during burning. It can also be seen that CNTs in the residue form a cross. linking network char on the fiber surface. This cross. linked network inhibits the inflation of bubbles, in favor of the formation of multicellular char. Thus, the enhanced flame retardant effect of this QL assembly coating is attributed to the formation of intumescent network structure during burning by introducing PA. CNT network into PHMGP/ APP intumescent coating. Fourier transform infrared spectra and X- ray photoelectron spectroscopy of the residue char further reveal that the enhanced flame retardant effect on cotton is attributed to the powerful cooperative heat barrier action of intumescent flame retardant coating and CNT physical barrier layer, which is formed on the surface of fiber during burning.

Synthesis of Highly Thermal Conductive Carbon Nanotubes on Cellulose Nanofiber Film-Loaded Polyethylene Glycol Phase Change Material with Flame Retardancy by Layered Double Hydroxide

Optimization of Flexible Nacre-Like Cellulose Nanofiber Films by a Covalent Overlapping Method: Excellent Thermal Conductivity and Superior Flame Resistance

Thermal Conductivity and Flame Retardancy of Nacre-like Cellulose-based Composite Films Reinforced with Flame-retardant Functionalized Graphene Nanoplatelets by One-Step Ball Milling

Simultaneous enhancement in thermal conductivity and flame retardancy of flexible film by introducing covalent bond connection

Multifunctional Composite Phase Change Material with Electrostatic Self-Assembly Structure Based on Carboxylated Multi-Walled Carbon Nanotubes

Thermal Comfort and Flame Retardant Performance of Novel Temperature-Control Coatings with Modified Phase Change Material Microcapsules

Improved thermal energy storage, leak prevention and flame retardance of phase change material using halloysite nanotubes

Casein phosphopeptide-biofunctionalized graphene oxide nanoplatelets based cellulose green nanocomposites with simultaneous high thermal conductivity and excellent flame retardancy

The thermal behavior and flame retardant performance of phase change material microcapsules with modified carbon nanotubes

Polypyrrole Nanotube Derived Flame-Retardant Substrate of Cellulose Nanofiber Composites with Thermal Conductive and Electromagnetic Interference Shielding Effect

Fluorinated Carbon Nanotube/Nanofibrillated Cellulose Composite Film with Enhanced Toughness, Superior Thermal Conductivity, and Electrical Insulation

Carboxylated cellulose composite film fabricated via layer‐by‐layer self‐sssembly for thermal management material with ultra‐high thermal conductivity

Effect of Modified Carbon Nanotube on the Thermal Behavior, Flame Retardancy and Mechanical Properties of Poly(1,4-Butylene Terephthalate)/Aluminum Phosphinate Composites

A High Heat Storage Capacity Form-Stable Composite Phase Change Material with Enhanced Flame Retardancy

Enhanced thermal performance of phase change material microcapsules using halloysite nanotubes

Cellulose Nanofiber-Based Nanocomposite Films with Efficient Electromagnetic Interference Shielding and Fire-Resistant Performance

Significantly thermally conductive cellulose composite film with graphene/boron nitride heterojunction structure achieved by combustion synthesis

Improvement of Flame Retardant Property of Cotton Fabric by Construction of Carbon Nanotube-Based Hybrid Coating Via Self-Assembly

Hydrophilic modification of carbon nanotube to prepare a novel porous copper network-carbon nanotube/erythritol composite phase change material

Preparation of Thermal Conductivity-Enhanced, Microencapsulated Phase Change Materials Using Cellulose-Assisted Graphene Dispersion for Thermal Regulation in Textiles

Modified carbon nanotubes/polyvinyl alcohol composite electrothermal films