Abstract:Tensegrity structures have been widely utilized as lightweight structures due to their high stiffness-to-mass and strength-to-mass ratios. Minimal mass design of tensegrity structures subject to external loads and specific constraints (e.g., member yielding and buckling) has been intensively studied. However, all the existing studies focus on passive tensegrity structures, i.e., the structural members cannot change their lengths actively and the structure has to passively resist external loads. An active tensegrity structure equipped with actuators can actively adapt its internal forces and nodal positions and thus can actively resist external loads. Therefore, it is expected that active tensegrity structures use less material compared to passive tensegrity structures thus leading to a smaller mass. Due to the integration of the active control system, the design of active tensegrity structures is different from passive tensegrity structures. This study proposes a general approach for the design of minimal mass active tensegrity structures based on a mixed integer programming scheme, in which the member crosssectional areas, prestress, actuator layout and control strategies (i.e., actuator length changes) are designed simultaneously. The member cross-sectional areas, prestress level, and actuator control strategies are treated as continuous variables and the actuator layout is treated as a binary variable. The equilibrium condition, member yielding, cable slackness, strut buckling, and the limitations on the nodal displacements as well as other practical requirements are formulated as constraints. Three typical active tensegrity structures are designed through the proposed approach and the results are benchmarked with the equivalent minimal mass passive designs. It is illustrated that the active designs can significantly decrease the material consumption compared with the equivalent passive designs thus leading to more lightweight tensegrity structures.

Design of a Deployable Aerodynamic Decelerator Based on a Tensegrity Structure

Preliminary design and dynamical analysis of a new deployable air target

Structural Analysis for Deployable Space Truss with Twist Springs Activated

Kinematic Analysis and Model Fabrication of a Space Deployable Optical Baffle

Kinematic Analysis of the Deployable Truss Structures for Space Applications

Minimal Mass Design of Active Tensegrity Structures

Deployment Dynamic Analysis of Circular Truss Deployable Antenna with Friction

Single-Layer Deployable Truss Structure Driven by Elastic Components

DEPLOYMENT ANALYSIS OF DEPLOYABLE TRUSS STRUCTURES WITH FLEXIBLE DEFORMATION

Collision-Free Shape Control of A Plane Tensegrity Structure Using an Incremental Dynamic Relaxation Method and A Trial-And-Error Process

Optimal Design and Analysis of Deployable Antenna Truss Structure Based on Dynamic Characteristics Restraints

Optimal displacement control of tensegrity structures based on linear programming

Design Conception and Deployment Simulation for a Highly Synchronized Extendable/Retractable Space Mast

Structural Design and Static Analysis of a Double-Ring Deployable Truss for Mesh Antennas

GEOMETRIC DESIGN OF DEPLOYABLE/RETRACTABLE MAST

Automatic Assembly of Tensegrity Chain Structures along Axes Based on NURBS Curves

A tensegrity-based morphing module for assembling various deployable structures

Deployment of Tensegrities Subjected to Load-Carrying Stiffness Constraints

Conceptual Design of Flexible Thermal Protect Structure for Deployable Lunar Habitats

Energy-Preserving Perturbation Method for Thermally Induced Dynamics in Aerospace Tensegrity Structures

Thermally-induced vibration analysis of tensegrity modules during space deployment using dynamic stiffness method