Abstract:The exhaust back pressure of diesel engines is becoming increasingly higher nowadays. In order to keep discharging exhaust unhindered and operating smoothly under high exhaust back pressure, a large reduction in engine maximum brake output is often observed, as well as increased fuel consumption and lower combustion efficiency with heavy exhaust smokes. In our previous study, "Applicability of Reducing Valve Timing Overlap for Diesel Engines under High Exhaust Back Pressure", a reduced valve timing overlap of 12 °CA partially improves the brake output and BSFC for a fixed-geometry turbocharged diesel engine under high exhaust back pressures. A potential solution for restoring the brake output under high exhaust back pressures could be the use of variable-geometry turbochargers. In this study, a variable-geometry turbocharger is applied to a diesel engine to study the engine performance characteristics and applicability, especially the further improvement of brake output and the brake-specific fuel consumption of the engine. Continuing with the results of our previous research, a basic setting of 12 °CA for the valve timing overlap is set up for the subsequent engine performance simulations in this study (using GT-Power SW). Via simulation, exhaust back pressures of 25 kPa, 45 kPa, and 65 kPa gauge are studied for a turbocharged diesel engine. The results for the engine parameters, including brake output, brake-specific fuel consumption, compressor outlet temperature, turbine inlet temperature, intake air mass flow rate, and exhaust mass flow rate are analyzed. The results of the variable-geometry turbocharger, including turbocharger speed, pressure ratios and efficiencies of compressor and turbine are also analyzed. The results indicate that the brake output and brake-specific fuel consumption are effectively improved under full-load operation with an adequate variable-geometry turbocharger rack position. Operable ranges of rack position are also set up for different back pressures.

Simulation Research on Variable Geometry Turbocharging System of Diesel Engine

Modeling Of Two Charge-Air Cooling Turbo-Charging Systems For Spark Ignition Engines

Matching Simulation on Vehicle Diesel Engine and Sequential Turbo-charging System

Turbo-Cool Turbocharging System for Spark Ignition Engines

Simulation of Optimization of Variable Geometry for a Turbofan Engine of a Missile

Applicability of Variable-Geometry Turbocharger for Diesel Generators under High Exhaust Back Pressure

A Study on an Automatically Variable Intake Exhaust Injection Timing Turbo-Charging System for Diesel Engines

Research and application of the turbo-compound technology on a heavy duty diesel engine

A novel variable geometry turbine achieved by elastically restrained nozzle guide vanes

Simulation on the Matching of Turbocharger and Electronically Controlled CNG Engine

A Research on the Variable Geometry Turbocharger Control System for Diesel Engine

Influence of Geometry Parameters for Two-stage Supercharging Turbine on Diesel Engine Performance

Experimental study on the performance of a turbocompound diesel engine with variable geometry turbocharger

Simulation and Experimental Research on a Mixed Pulse Converter Turbocharging System

Numerical Simulation of HCNG Engine on GT-Power

Study on Mixed Pulse Converter (mixpc) Turbocharging System and Its Application in Marine Diesel Engines

Study of Two-Stage Turbine Characteristic and Its Influence on Turbo-Compound Engine Performance

Numerical Simulation of Two-Stage Variable Geometry Turbine

Turbocharging strategy among variable geometry turbine, two-stage turbine, and asymmetric two-scroll turbine for energy and emission in diesel engines

The Simulation Research On The Natural Gas/Hydrogen Engine'S Performance

Study on Turbocompound System for a Heavy-Duty Diesel Engine by Combining Matching Analysis with Experiments