Abstract:The exhaust back pressure of diesel engines is becoming increasingly higher nowadays. In order to keep discharging exhaust unhindered and operating smoothly under high exhaust back pressure, a large reduction in engine maximum brake output is often observed, as well as increased fuel consumption and lower combustion efficiency with heavy exhaust smokes. In our previous study, "Applicability of Reducing Valve Timing Overlap for Diesel Engines under High Exhaust Back Pressure", a reduced valve timing overlap of 12 °CA partially improves the brake output and BSFC for a fixed-geometry turbocharged diesel engine under high exhaust back pressures. A potential solution for restoring the brake output under high exhaust back pressures could be the use of variable-geometry turbochargers. In this study, a variable-geometry turbocharger is applied to a diesel engine to study the engine performance characteristics and applicability, especially the further improvement of brake output and the brake-specific fuel consumption of the engine. Continuing with the results of our previous research, a basic setting of 12 °CA for the valve timing overlap is set up for the subsequent engine performance simulations in this study (using GT-Power SW). Via simulation, exhaust back pressures of 25 kPa, 45 kPa, and 65 kPa gauge are studied for a turbocharged diesel engine. The results for the engine parameters, including brake output, brake-specific fuel consumption, compressor outlet temperature, turbine inlet temperature, intake air mass flow rate, and exhaust mass flow rate are analyzed. The results of the variable-geometry turbocharger, including turbocharger speed, pressure ratios and efficiencies of compressor and turbine are also analyzed. The results indicate that the brake output and brake-specific fuel consumption are effectively improved under full-load operation with an adequate variable-geometry turbocharger rack position. Operable ranges of rack position are also set up for different back pressures.

A Research on the Variable Geometry Turbocharger Control System for Diesel Engine

A Study on an Automatically Variable Intake Exhaust Injection Timing Turbo-Charging System for Diesel Engines

Study on Diesel Engine Coolant Temperature Control Strategy with Feedforward

Preliminary Study on a Variable-Geometry Exhaust Manifold Turbocharging System

Experimental study on the performance of a turbocompound diesel engine with variable geometry turbocharger

A novel variable geometry turbine achieved by elastically restrained nozzle guide vanes

Calculation Study on the Variable Geometry Exhaust Manifold Turbo-charging System for the 8170 Diesel Engine

Design and Experiment for VGEM Turbocharging System

Research and application of the turbo-compound technology on a heavy duty diesel engine

Variable geometry turbocharging for lower emissions and improved torque characteristics

Turbo-Cool Turbocharging System for Spark Ignition Engines

Thermodynamic cycle characteristics of twin-VGT diesel engine and its control method at variable altitudes

Intelligent Control Strategy for Transient Response of a Variable Geometry Turbocharger System Based on Deep Reinforcement Learning

Investigation of a Variable Geometry Turbine Nozzle for Diesel Engine Turbochargers

Experimental Research on Steady and Transient Performances of Propulsion Characteristics of Diesel Engine with Sequential Turbocharging System

Research on nonlinear model predictive control of regulated two-stage turbocharging system of diesel engine at high altitudes

Applicability of Variable-Geometry Turbocharger for Diesel Generators under High Exhaust Back Pressure

Closed-loop Control for Diesel Engine Air Systems Equipped with Vacuum Actuators

Study on Optimal Control Strategy for Regulated Two-Stage Turbocharged Diesel Engine During Transient Process

Design of Turbocharger Variable Nozzle