Molecular dynamic simulation for thermal decomposition of RDX with nano-AlH3 particles

Cui-Fang Li,Zheng Mei,Feng-Qi Zhao,Si-Yu Xu,Xue-Hai Ju

DOI: https://doi.org/10.1039/c8cp01621f

IF: 3.3

2018-01-01

Physical Chemistry Chemical Physics

Abstract:Reactive molecular dynamic simulation of a high explosive, RDX, mixed with AlH3 nanoparticles was performed by a newly parameterized ReaxFF force field.

What problem does this paper attempt to address?

Molecular dynamic simulation for thermal decomposition of RDX with nano-AlH 3 particles.

Cui-Fang Li,Zheng Mei,Feng-Qi Zhao,Si-Yu Xu,Xue-Hai Ju

DOI: https://doi.org/10.1039/c8cp01621f

IF: 3.3

2018-01-01

Physical Chemistry Chemical Physics

Abstract:Molecular dynamic simulation of a high explosive, RDX, mixed with AlH3 nanoparticles was performed by a newly parameterized ReaxFF force field. Testing of the ReaxFF shows that the mean absolute errors of the densities and bond lengths between calculated and experimental values are less than 7% and 3%, respectively. Using the ReaxFF, effects of AlH3 nanoparticles with different radii on the thermal decomposition of RDX were revealed. A new mechanism of the generation and the consumption of H-2 was discovered in the explosion. The H-2 is released by AlH3 firstly and then it reacts with NO2 and CO2 from the decomposition of RDX, leading to an increase of H2O, NO and CO. Meanwhile, the size effect of AlH3 upon the reaction was also revealed. As a result, the number of produced H2O and CO2 molecules increases by 10.38% and 56.85%, respectively, when the radius of AlH3 nanoparticles decreases from 1.10 to 0.68 nm. This showed that RDX decomposes more completely with smaller AlH3 nanoparticles, which was further demonstrated by the analysis of reaction residues and diffusion coefficients.
Molecular Reaction Dynamics Simulation of Thermal Decomposition for Aluminiferous RDX Composites

Ying Zhao,Feng-Qi Zhao,Si-Yu Xu,Xue-Hai Ju

DOI: https://doi.org/10.1016/j.commatsci.2020.109556

IF: 3.572

2020-01-01

Computational Materials Science

Abstract:A newly parameterized reactive force field with low gradient correction (ReaxFF-1g) is used to simulate the thermal decomposition of RDX systems. Pure Al, surface nitrided Al (AlN) and surface oxidized Al (AlO) particles are constructed to mix with RDX. The simulation results indicate that the decomposition mechanism of pure RDX is the elimination of HONG in the initial stage and the elimination of -NO2 in the later stage. The mechanism is further testified by the density functional calculation. RDX molecule adsorbs on the surface of Al particles to form N-Al and O-Al bonds. N-O bond ruptures is the main decomposition ways of aluminiferous RDX in the initial stage. The decompositions of RDX and RDX/AlO need to overcome 2.00 kJ/g and 0.31 kJ/g energy barrier, respectively. However, there are no energy barriers in RDX/Al and RDX/AlN decomposition processes. Aluminiferous RDX decomposition depends on the strong attraction of Al to N and O. Alumina layer blocks the attraction of Al to O and N in RDX, causing the reactivity of AlO declines significantly. However, the Al-nitride layer hardly has such blocking effect, resulting AlN maintains the reactivity of Al.
Thermodynamic Simulation of the RDX–Aluminum Interface Using ReaxFF Molecular Dynamics

Ning Wang,Jinhua Peng,Aimin Pang,Tieshan He,Fang Du,Andres Jaramillo-Botero

DOI: https://doi.org/10.1021/acs.jpcc.7b03108

2017-01-01

Abstract:We use reactive molecular dynamics (RMD) simulations to study the interface between cyclotrimethylene trinitramine (RDX) and aluminum (Al) with different oxide layers to elucidate the effect of nanosized Al on thermal decomposition of RDX. A published ReaxFF force field for C/H/N/O elements was retrained to incorporate Al interactions and then used in RMD simulations to characterize compound energetic materials. We find that the predicted adsorption energies for RDX on the Al (111) surface and the apparent activation energies of RDX and RDX/Al are in agreement with ab initio calculations. The Al (111) surface-assisted decomposition of RDX occurs spontaneously without potential barriers, but the decomposition rate becomes slow when compared with that for RDX powder. We also find that the Al (111) surface with an oxide layer (Al oxide) slightly increases the potential barriers for decomposition of RDX molecules, while alpha-Al2O3 (0001) retards thermal decompositiOn of RDX, due to the changes in thermal, decomposition kinetics. The most likely mechanism for the thermal decomposition of RDX powder is described by the Avrami-Erofeev equation, with n = 3/4, as random nucleation and subsequent growth model. Although the decomposition mechanism of RDX molecules in the RDX/Al matrix complies with three-dimensional diffusion, Jander's equation for RDX(210)/Al oxide and the Zhuralev-Lesokin-Tempelman (Z-L-T) equation for RDX(210)/Al2O3 (0001) provide a more accurate description. We conclude that the origin of these differences in dynamic behavior is due to the variations in the oxide layer morphologies.
Reactive Molecular Dynamics Simulation of Thermal Decomposition for Nano-Aluminized Explosives

Zheng Mei,Qi An,Feng-Qi Zhao,Si-Yu Xu,Xue-Hai Ju

DOI: https://doi.org/10.1039/c8cp05006f

2018-01-01

Abstract:Aluminized explosives have important applications in civil construction and military armaments, but their thermal decomposition mechanisms are not well characterized. Here, the thermal decomposition of TNT, RDX, HMX and CL-20 on Al nanoparticles is examined by reactive dynamics simulations using a newly parameterized reactive force field with low gradient correction (ReaxFF-lg). Partially passivated Al nanoparticles were constructed and mixed with TNT, RDX, HMX and CL-20 crystals and then the mixed systems are heated to a high temperature in which the explosives are fully decomposed. The simulation results show that the aluminized explosives undergo three main steps of thermal decomposition, which were denoted adsorption period (0-20 ps), diffusion period (20-80 ps) and formation period (80-210 ps). These stages in sequence are the chemical adsorption between Al and surrounding explosive molecules (R-NO2-Al bonding), the decomposition of the explosives and the diffusion of O atoms into the Al nanoparticles, and the formation of final products. In the first stage, the Al nanoparticles decrease the decomposition reaction barriers of RDX (1.90 kJ g(-1)), HMX (1.95 kJ g(-1)) and CL-20 (1.18 kJ g(-1)), respectively, and decrease the decomposition reaction barrier of TNT from 2.99 to 0.29 kJ g(-1). Comparing with the crystalline RDX, HMX and CL-20, the energy releases are increased by 4.73-4.96 kJ g(-1) in the second stage. The number of produced H2O molecules increased by 25.27-27.81% and the number of CO2 molecules decreased by 47.73-68.01% in the third stage. These three stages are further confirmed by the evolutive diagram of the structure and temperature distribution for the CL-20/Al system. The onset temperatures (T-o) of generating H2O for all the aluminized explosives decrease, while those of generating CO2 for aluminized HMX and CL-20 increase, which are in accord with the experiment of aluminized RDX.
Molecular dynamics study on the thermal decomposition of 1,3,5-trinitro-1,3,5-triazinane (RDX) catalyzed by aluminum nanoparticles with different contents

Fanqin Xiong,Ruixuan Xu,Hongqi Nie,Qilong Yan,Yuxin Wu,Jun Liu,Jiuyu Chen,Yunlan Sun

DOI: https://doi.org/10.1016/j.mtcomm.2023.106882

IF: 3.8

2023-08-18

Materials Today Communications

Abstract:The mechanism of thermal decomposition of 1,3,5-trinitro-1,3,5-triazinane (RDX) catalyzed by nano-sized aluminum powder remains unclarified. In the present study, reactive molecular dynamics simulations using the parameterized reactive force field with low gradient correction (ReaxFF-lg) were conducted to study the microscale process of the RDX thermal decomposition catalyzed by different Al contents, and the density functional theory calculations were used to analyze the initial decomposition pathways of RDX on the Al surface. The thermal disintegration and the released energy of RDX are significantly facilitated by an increase in Al concentration at a lower level and the optimal value is around 35 wt%, while a higher concentration of Al will lead to an opposite effect. The dissociation of nitro group is the most probable initial reaction pathway for RDX decomposition on the Al surface. In addition, the evolutions of Al-containing clusters, key intermediates, and final products were analyzed, providing more information about this reaction. The findings suggest that the addition of Al nanoparticles improves the properties of RDX-based explosives, but the optimal amount of Al is critical for achieving the desired effects. The detailed analysis of the reaction mechanism and intermediate products provides valuable insights into the underlying mechanisms of the Al/RDX system.

materials science, multidisciplinary
ReaxFF molecular dynamics simulations on thermal decomposition of RDX-based CMDB propellants

Huanan Wei,Tianpeng Li,Kai Yao,Zhaolong Xuan

DOI: https://doi.org/10.1007/s00894-022-05377-4

IF: 2.172

2022-11-17

Journal of Molecular Modeling

Abstract:ReaxFF molecular dynamics (ReaxFF MD) simulations were performed to study the thermal decomposition property of cyclotrimethylenetrinitramine (RDX)-based composite modified double base (CMDB) propellants. The intermediate products and final products of the decomposition of RDX-based CMDB propellants at 2000 K, 2500 K, and 3000 K are obtained. The simulation results show that the decomposition of RDX and RDX/HTPB/Al is primary triggered by N-NO 2 rupture, and then, the intermedia products undergo a series of complex interactions to form final products. The final products of RDX/HTPB/Al are H 2 and N 2 , while the final products of pure RDX are H 2 , N 2 , and H 2 O. In addition, the abundance of the main intermediate products generated by RDX/HTPB/Al is lower than that of RDX, in that the reaction between intermediate products is more complex for RDX/HTPB/Al. Moreover, the decomposition rate of RDX/HTPB/Al increases with the increasing temperature.

chemistry, multidisciplinary,biochemistry & molecular biology,biophysics,computer science, interdisciplinary applications
Shock Response of 1,3,5-Trinitroperhydro-1,3,5-triazine (RDX): the C-N Bond Scission Studied by Molecular Dynamics Simulations

Jiao-Nan Yuan,Yong-Kai Wei,Xiu-Qing Zhang,Xiang-Rong Chen,Guang-Fu Ji,Meena Kumari Kotni,Dong-Qing Wei

DOI: https://doi.org/10.1063/1.5005804

IF: 2.877

2017-01-01

Journal of Applied Physics

Abstract:The shock response has a great influence on the design, synthesis, and application of energetic materials in both industrial and military areas. Therefore, the initial decomposition mechanism of bond scission at the atomistic level of condensed-phase α-RDX under shock loading has been studied based on quantum molecular dynamics simulations in combination with a multi-scale shock technique. First, based on the frontier molecular orbital theory, our calculated result shows that the N-NO2 bond is the weakest bond in the α-RDX molecule in the ground state, which may be the initial bond for pyrolysis. Second, the changes of bonds under shock loading are investigated by the changes of structures, kinetic bond lengths, and Laplacian bond orders during the simulation. Also, the variation of thermodynamic properties with time in shocked α-RDX at 10 km/s along the lattice vector a for a timescale of up to 3.5 ps is presented. By analyzing the detailed structural changes of RDX under shock loading, we find that the ...
Thermal Decomposition of Core–Shell-Structured RDX@AlH3, HMX@AlH3, and CL-20@AlH3 Nanoparticles: Reactive Molecular Dynamics Simulations

Zijian Sun,Lei Yang,Hui Li,Mengyun Mei,Lixin Ye,Jiake Fan,Weihua Zhu

DOI: https://doi.org/10.3390/nano14221859

2024-01-01

Abstract:The reactive molecular dynamics method was employed to examine the thermal decomposition process of aluminized hydride (AlH3) containing explosive nanoparticles with a core–shell structure under high temperature. The core was composed of the explosives RDX, HMX, and CL-20, while the shell was composed of AlH3. It was demonstrated that the CL-20@AlH3 NPs decomposed at a faster rate than the other NPs, and elevated temperatures could accelerate the initial decomposition of the explosive molecules. The incorporation of aluminized hydride shells did not change the initial decomposition mechanism of the three explosives. The yields of the main products (NO, NO2, N2, H2O, H2, and CO2) were investigated. There was a large number of solid aluminized clusters produced during the decomposition, mainly AlmOn and AlmCn clusters, together with AlmNn clusters dispersed in the AlmOn clusters.
Influence of Aluminum Particle Size on Thermal Decomposition of RDX

yong l zhu,hongzhi huang,haiyu ren,qing jie jiao

DOI: https://doi.org/10.1080/07370652.2012.688788

IF: 2.421

2013-01-01

Journal of Energetic Materials

Abstract:The effect of aluminum particle size (10.7 µm, 2.6 µm, and 40 nm) on the thermal decomposition of 1,3,5-trimethylene trinitramine (RDX) was investigated using differential scanning calorimetry (DSC), thermogravimetry–derivative thermogravimetry (TG-DTG), and DSC-TG–mass spectrometry (MS)–Fourier transform infrared (FTIR) spectroscopy, respectively. The results showed that the first exothermic peak (512 K) of RDX diminishes gradually with an increase in the nanosize aluminum content and is overcome by the second exothermic peak when the content of nano-Al reaches 30 wt%. The reaction mechanisms demonstrated by the nonisothermal kinetics of RDX in the absence and presence of 30 wt% Al were conformed to the Avrami-Erofeev equations for all of the RDX compositions. The nucleus growth factor for the RDX/40 nm Al mixture was found to be n = 2/3 compared to n = 3/4 for RDX with and without the microsized Al. The MS and FTIR analyses indicated that the thermal decomposition of RDX in the presence of Al nanopowders favors C-N bond cleavage over N-N bond cleavage as the rate determining step.
The solid phase thermal decomposition and nanocrystal effect of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) via ReaxFF large-scale molecular dynamics simulation.

Ke Zheng,Yushi Wen,Bing Huang,Jun Wang,Jin Chen,Gongnan Xie,Guoqing Lv,Jian Liu,Zhiqiang Qiao,Guangcheng Yang

DOI: https://doi.org/10.1039/c9cp01482a

IF: 3.3

2019-01-01

Physical Chemistry Chemical Physics

Abstract:The solid phase thermal decomposition and nanocrystal effect are extremely important to understand the ignition, combustion, reaction growth and buildup to detonation under shock wave action. To explore the basic mechanism at the atomic level and understand the interaction among nanocrystal lattices, molecules, and intermediates during the solid phase decomposition, ReaxFF large-scale molecular dynamics simulation at 1000-3000 K was demonstrated on the solid phase of nanocrystalline RDX with a size in the range of 5-12 nm. Based on the analysis of the RDX decay and chemical species, we found that the whole decomposition process can be divided into the solid-affected stage and the following less-condensed phase stage. From the results of NO2 diffusion and high frequency reaction statistics for the nanocrystal effect on the RDX decay, intermediate diffusion was found to be strongly associated with the chemical pathway. In addition, it was found for the first time that the thermal decomposition of RDX originates from the inside of the nanocrystal instead of its surface. Furthermore, a promising uniform energy distribution mechanism transfer by vibration inside the nanocrystalline RDX was demonstrated. The detailed information derived from this study can aid in the thorough understanding of the size effect on the chemical kinetics of nanoexplosives, especially for thermal decomposition and reaction growth.
Pyrolysis of RDX and Its Derivatives Via Reactive Molecular Dynamics Simulations

Peng Li-Juan,Yao Qian,Wang Jing-Bo,Li Ze-Rong,Zhu Quan,Li Xiang-Yuan

DOI: https://doi.org/10.3866/pku.whxb201701161

2017-01-01

Acta Physico-Chimica Sinica

Abstract:The thermal decomposition mechanisms of cyclotrimethylene trinitramine (RDX) and its derivatives are investigated using ReaxFF reactive molecular dynamics simulation at high temperatures (2000,2500,and 3000 K).It is shown that the first pyrolysis step of RDX and its derivatives is the N-NO2 homolytic cleavage to produce NO2;however,the subsequent reaction mechanism is completely different due to the different six membered rings and side chain groups.In these four model systems,NO2 and NO molecules are common intermediates in the thermal decomposition process,which eventually transform to N2 in the following reactions.The most stable products are N2,H2O,and CO2 in the thermal process,among which N2 has the maximum molecular number (more than 20).The numbers of cracked H2O and CO2 molecules are very different in the four model systems due to the different C/N and H/O ratios.At different temperatures,the maximum numbers of carbon atoms in the carbon clusters are all small in the unit cell simulations of the four systems.In the further super cell simulation for RDX and RDX-D2 the numbers of carbon atoms reach about 30 and 16,respectively,which are higher than those from the unit cell simulation.In both the unit and super cell simulations for RDX-D1 and RDX-D3,the carbon cluster cannot be formed and there exist only small carbon molecular fragments.Therefore,the initial molecular structure and elemental ratio have a large effect on the production of carbon clusters.
Reactive molecular dynamics simulation of thermal decomposition for nitromethane/nano-aluminum composites

Xin-Ke Wang,Ying Zhao,Feng-Qi Zhao,Si-Yu Xu,Xue-Hai Ju

DOI: https://doi.org/10.1007/s00894-020-04562-7

2020-10-14

Abstract:The thermal decomposition of pure nitromethane (NM) and NM/nano-aluminum (Al) composites was simulated by reactive molecular dynamics with ReaxFF-lg corrected force field parameters. The initial decomposition pathway of NM molecules in pure NM is C-N bond rupture. However, NM is decomposed early by the initial pathway of N-O bond rupture when it mixes with nano-Al because of the strong attraction of Al to O. The decomposition process of NM/nano-Al can be divided into three stages: adsorption, slow decomposition, and rapid decomposition. The addition of nano-Al particles decreases the energy barrier in decomposition, increases the released energy, and reduces the decomposition temperature of NM. Adding 3% Al to the explosive can make the detonation pressure 3.083% higher than that of pure system. Compared with pure NM, the energy barrier of 16% Al composite is 25.63 kcal/mol lower and the energy released is 22.99 kcal/mol more. There is an optimal amount of Al contents being added to the NM composite by which the largest total numbers of gaseous products (N2, H2O, and CO2) are released. The effect of Al additives on CO2 production is the most obvious. The maximum detonation pressure can be achieved by adding an appropriate amount of nano-Al, which is similar to the experimental results. Graphical abstract.
Thermal decomposition of RDX from reactive molecular dynamics

Alejandro Strachan, Edward M Kober, Adri CT Van Duin, Jonas Oxgaard, William A Goddard

2005-02-01

Abstract:A molecular level understanding of condensed-matter chemistry is a central problem in many areas of chemistry and materials science. Despite the enormous experimental and theoretical progress in recent years a wide variety of phenomena remains uncharacterized. Particularly challenging is understanding the decomposition and subsequent reactions of high energy HE materials due to the extreme conditions of temperature and pressure involved as well as their complex chemistry. Recent advances in experimental techniques such as ultra-fast spectroscopy1 and interferometry2 are beginning to provide molecular-level information about the decomposition of HE materials. Nevertheless, molecular dynamics MD remains the only technique capable of providing the spatial and temporal resolution necessary to characterize a variety of fundamental issues where a detailed understanding is still lacking, such as the …
Mechanistic Study of the Influence of Aluminum Nanoparticles on the Pressure Sensitivity of 1,3,5-Trinitro1,3,5-triazinane (RDX) Thermal Decomposition

Fanqin Xiong,Ruixuan Xu,Hongqi Nie,Qilong Yan,Yuxin Wu,Jun Liu,Jiuyu Chen,Yunlan Sun

DOI: https://doi.org/10.1016/j.colsurfa.2023.132439

2023-01-01

Abstract:The incorporation of Al nanoparticles (Al NPs) into 1,3,5-trinitro1,3,5-triazinane (RDX) can catalyze its thermal decomposition and reduce the pressure exponent (n) of solid propellants. However, the underlying reaction mechanism at a deeper level remains unclear. In this study, the reaction processes of Al NPs catalyzing the thermal decomposition of RDX under different initial pressures were investigated by utilizing the ReaxFF molecular dynamics (ReaxFF-MD) simulations combined with DFT calculations, and the influence mechanism of Al NPs on the pressure sensitivity of RDX thermal decomposition was revealed from various perspectives. In the initial stage of the reaction, unlike the nitro group dissociation observed in pure RDX, the incorporation of Al NPs alters the initial decomposition pathway of RDX, making it more easily adsorbed on the surface of Al and enhancing the early-stage decomposition rate. Furthermore, Al NPs exhibit higher catalytic activity in low-pressure systems. In the later stage, because of the massive adsorption of free radicals generated from RDX decomposition on the surface of Al NPs, the decomposition rate of RDX decreases significantly, especially in high-pressure systems. Consequently, Al NPs synergistically reduce the pressure sensitivity of the RDX thermal decomposition from two different perspectives. Compared to traditional experimental research or single RDX simulation studies, this work further explores the interaction between Al and RDX from a microscopic perspective, addressing the gap in the field of the influence mechanisms of Al NPs on the pressure sensitivity of RDX thermal decomposition. It also establishes a theoretical foundation for the practical application of Al@RDX fuels.
Thermal Decomposition Mechanism of 1,3,5,7-Tetranitro-1,3,5,7-tetrazocane Accelerated by Nano-Aluminum Hydride (alh3): ReaxFF-Lg Molecular Dynamics Simulation

Ying Zhao,Zheng Mei,Feng-Qi Zhao,Si-Yu Xu,Xue-Hai Ju

DOI: https://doi.org/10.1021/acsomega.0c02968

IF: 4.1

2020-01-01

ACS Omega

Abstract:ReaxFF-low-gradient reactive force field with CHONAl parameters is used to simulate thermal decomposition of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane (HMX) and AlH3 composite. Perfect AlH3 and surface-passivated AlH3 particles were constructed to mix with HMX. The simulation results indicate HMX is adsorbed on the surface of particles to form O-Al and N-Al bonds. The decomposition of HMX and AlH3 composite is an exothermic reaction without energy barrier, but the decomposition of pure HMX needs to overcome the energy barrier of 133.57 kcal/mol. Active nano-AlH3 causes HMX to decompose rapidly at low temperature, and the primary decomposition pathway is the rupture of N-O and C-N bonds. Adiabatic simulation shows that the energy release and temperature increase of HMX/AlH3 is much larger than those of the HMX system. Surface-passivated AlH3 particles only affect the initial decomposition rate of HMX. In HMX and AlH3 composites, the strong attraction of Al in AlH3 to O and the activation of the intermediate reaction by H-2 cause HMX to decompose rapidly. The final decomposition products of pure HMX are H2O, N-2, and CO2, and those of HMX/AlH3 are H2O, N-2, and Al-containing clusters dominated by C-Al. The final gas production shows that the specific impulse of HMX/AlH3 is larger than that of HMX.
Reactive molecular dynamics simulation of thermal decomposition for nano-AlH3/TNT and nano-AlH3/CL-20 composites

Zheng Mei,Cui-Fang Li,Feng-Qi Zhao,Si-Yu Xu,Xue-Hai Ju

DOI: https://doi.org/10.1007/s10853-019-03364-4

IF: 4.5

2019-01-21

Journal of Materials Science

Abstract:Using reactive molecular dynamics method with the reactive force field framework, the thermal decomposition of nano-AlH3/TNT and nano-AlH3/CL-20 composites was investigated to develop new high explosives. The binding energies and relaxed densities of the composites show that the compatibility of TNT/AlH3 is better than CL-20/AlH3, which is confirmed by the DFT calculations. The pyrolysis simulations showed that the potential barrier of TNT/AlH3 (1.14 kJ g−1) and CL-20/AlH3 (0.72 kJ g−1) are smaller than pure TNT (1.99 kJ g−1) and pure CL-20 (1.01 kJ g−1), respectively. This indicates the catalytic effect of AlH3 nanoparticle on the decomposition of TNT and CL-20. The catalytic effect was confirmed by the DFT calculations of the R–NO2 rupture of TNT and CL-20 molecules on AlH3 surfaces. The slower heating rate (rh) of 16 K ps−1 led to similar evolution results as rh = 32 K ps−1, which implies that the dependence of the simulation results on the heating rate is small. Moreover, TNT/AlH3 and CL-20/AlH3 release 1.07 and 1.97 kJ g−1 more energies and generate 33.8% and 14.0% more total gas products than pure TNT and CL-20, respectively. Therefore, AlH3 nanoparticles can improve the detonation performance and specific impulse for TNT and CL-20. These are in accord with the effect of AlH3 on nitromethane and ammonium perchlorate/hydroxyl-terminated polybutadiene propellants in the experiments. As a result, the nano-AlH3/TNT and nano-AlH3/CL-20 composites can be promising candidates of new high explosives.

materials science, multidisciplinary
Molecular Dynamics Simulations of the Thermal Decomposition of RDX/HTPB Explosives

Junying Wu,Jiaojiao Wu,Junjian Li,Yiping Shang,Lang Chen

DOI: https://doi.org/10.1021/acsomega.3c01160

IF: 4.1

2023-06-06

ACS Omega

Abstract:The addition of binders to energetic materials is known to complicate the thermal decomposition process of such materials. To assess this effect, the present work studied the thermal decomposition of cyclotrimethylene trinitramine (RDX)/hydroxy-terminated polybutadiene (HTPB) mixtures and of pure RDX over the temperature range of 2000-3500 K by combining the classical reaction and first-principles molecular dynamics methods. The incorporation of HTPB as a binder was found to significantly reduce...

chemistry, multidisciplinary
Thermal Decomposition Mechanism of 1,3,5,7-Tetranitro-1,3,5,7-tetrazocane Accelerated by Nano-Aluminum Hydride (AlH 3 ): ReaxFF-Lg Molecular Dynamics Simulation

Ying Zhao,Zheng Mei,Feng-Qi Zhao,Si-Yu Xu,Xue-Hai Ju

DOI: https://doi.org/10.1021/acsomega.0c02968

IF: 4.1

2020-09-01

ACS Omega

Abstract:ReaxFF-low-gradient reactive force field with CHONAl parameters is used to simulate thermal decomposition of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane (HMX) and AlH3 composite. Perfect AlH3 and surface-passivated AlH3 particles were constructed to mix with HMX. The simulation results indicate HMX is adsorbed on the surface of particles to form O–Al and N–Al bonds. The decomposition of HMX and AlH3 composite is an exothermic reaction without energy barrier, but the decomposition of pure HMX needs to overcome the energy barrier of 133.57 kcal/mol. Active nano-AlH3 causes HMX to decompose rapidly at low temperature, and the primary decomposition pathway is the rupture of N–O and C–N bonds. Adiabatic simulation shows that the energy release and temperature increase of HMX/AlH3 is much larger than those of the HMX system. Surface-passivated AlH3 particles only affect the initial decomposition rate of HMX. In HMX and AlH3 composites, the strong attraction of Al in AlH3 to O and the activation of the intermediate reaction by H2 cause HMX to decompose rapidly. The final decomposition products of pure HMX are H2O, N2, and CO2, and those of HMX/AlH3 are H2O, N2, and Al-containing clusters dominated by C–Al. The final gas production shows that the specific impulse of HMX/AlH3 is larger than that of HMX.This article has not yet been cited by other publications.

chemistry, multidisciplinary
Decomposition Mechanisms of Α-Rdx Crystal under High Temperature Coupled with Detonation Pressure by Ab Initio Molecular Dynamics Simulations

XIANG Dong,WU Qiong,ZHU Wei-hua

DOI: https://doi.org/10.11943/j.issn.1006-9941.2018.06.003

2018-01-01

Chinese Journal of Energetic Materials

Abstract:The initiation and subsequent decomposition mechanisms ofα-RDX crystal under high temperature (3000 K) coupled with detonation pres-sure (34.5 GPa) were studied by ab initio molecular dynamics simulations.The crystal structure of RDX was relaxed using two types of van der Waals corrections such as PBE-G06 and PBE-TS functional at ambient conditions.The results indicate that the PBE-G06 functional is much suitable for studying α-RDX.Results show that the decomposition of α-RDX is triggered by the homolysis of the C—H bond.The DOS clearly validates that the C—H bond is broken.The elimination reaction of HONO during the decomposition is observed.The primary reactions for producing NO2, NO, N2O, N2, HONO, N2O4, H, O—H, H2O, and CO2 occur at very early stages.After the initiation of RDX, there are three different subsequent de-composition pathways.There are three main interesting subsequent decomposition paths include: (1 ) the C—N bond hemolysis triggers the other C—N bonds of this ring to break; (2) the dissociation of N—NO2 bond releases NO2 gas; (3) the H radical attacks the O atom to release O—H radical by forming O—H bond.
Study on Thermal Properties and Sensitivities of Nano-RDX

Longxiang WANG,Jie LIU,Jiangbao ZENG,Qing LI,Qiaoe LIU,Yi WANG,Wei JIANG,Fengsheng LI

DOI: https://doi.org/10.3969/j.issn.1001-8352.2013.06.003

2013-01-01

Abstract:The particle size distribution of nano-RDX was traced by the laser particle size analyzer .At the same time, the particle size and the morphology of nano-RDX were characterized through the SEM and the TEM .The thermal decomposition of nano-RDX which was prepared in batches by the pulverized machine HLGB-10 was examined by the TG/DSC simultaneous thermal analyzer .Furthermore, the explosion temperature in five seconds and the sensitivities were meas-ured.Results show that the nano-RDX gets a narrow particle size distribution .Compared with the coarse counterpart , the activation energy and the explosion temperature in five seconds decrease slightly , and the thermal stability remains unchanged .The electrostatic sensitivity and the flame sensitivity of nano-RDX are the same as that of the coarse counterpart.while friction, impact and shock wave sensitivity of nano-RDX respectively decrease by 37.5%, 92.8%and 51 .0%.

Molecular dynamic simulation for thermal decomposition of RDX with nano-AlH<sub>3</sub> particles

Molecular dynamic simulation for thermal decomposition of RDX with nano-AlH 3 particles.

Molecular Reaction Dynamics Simulation of Thermal Decomposition for Aluminiferous RDX Composites

Thermodynamic Simulation of the RDX–Aluminum Interface Using ReaxFF Molecular Dynamics

Reactive Molecular Dynamics Simulation of Thermal Decomposition for Nano-Aluminized Explosives

Molecular dynamics study on the thermal decomposition of 1,3,5-trinitro-1,3,5-triazinane (RDX) catalyzed by aluminum nanoparticles with different contents

ReaxFF molecular dynamics simulations on thermal decomposition of RDX-based CMDB propellants

Shock Response of 1,3,5-Trinitroperhydro-1,3,5-triazine (RDX): the C-N Bond Scission Studied by Molecular Dynamics Simulations

Thermal Decomposition of Core–Shell-Structured RDX@AlH3, HMX@AlH3, and CL-20@AlH3 Nanoparticles: Reactive Molecular Dynamics Simulations

Influence of Aluminum Particle Size on Thermal Decomposition of RDX

The solid phase thermal decomposition and nanocrystal effect of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) via ReaxFF large-scale molecular dynamics simulation.

Pyrolysis of RDX and Its Derivatives Via Reactive Molecular Dynamics Simulations

Reactive molecular dynamics simulation of thermal decomposition for nitromethane/nano-aluminum composites

Thermal decomposition of RDX from reactive molecular dynamics

Mechanistic Study of the Influence of Aluminum Nanoparticles on the Pressure Sensitivity of 1,3,5-Trinitro1,3,5-triazinane (RDX) Thermal Decomposition

Thermal Decomposition Mechanism of 1,3,5,7-Tetranitro-1,3,5,7-tetrazocane Accelerated by Nano-Aluminum Hydride (alh3): ReaxFF-Lg Molecular Dynamics Simulation

Reactive molecular dynamics simulation of thermal decomposition for nano-AlH3/TNT and nano-AlH3/CL-20 composites

Molecular Dynamics Simulations of the Thermal Decomposition of RDX/HTPB Explosives

Thermal Decomposition Mechanism of 1,3,5,7-Tetranitro-1,3,5,7-tetrazocane Accelerated by Nano-Aluminum Hydride (AlH 3 ): ReaxFF-Lg Molecular Dynamics Simulation

Decomposition Mechanisms of Α-Rdx Crystal under High Temperature Coupled with Detonation Pressure by Ab Initio Molecular Dynamics Simulations

Study on Thermal Properties and Sensitivities of Nano-RDX