Abstract:Electrochemical energy storage devices, like supercapacitors and batteries, are needed to meet the constantly increasing demands of portable energy devices. Many types of supercapacitor electrodes were synthesized and reported which include carbon-based materials, polymers, oxides and perovskites. In this work, we report on the fabrication of Cu doped bismuth ferrite (Cu-BiFeO 3 , Cu-BFO) nanoparticles via sol-gel procedure. In most of the doping cases the costly rare earth elements like La, Nd, Sm, Ce and Yb are used to replace Bi. Electrodes of Bi 1-x Cu x FeO 3 where x have the values 0.0, 0.025, 0.05, 0.075, 0.1 and 0.15 were deposited on graphitic sheets. Optimum Cu doping value was found to be at x = 0.05. Cu 2+ ions doping in place of Bi 3+ ions will reveal the roles of oxygen vacancies, as determined from XPS. The estimated values of specific capacitance was found to be 732 F/g at 0.5 A/g for the electrode at x = 0.05 in three electrode system. 5%Cu-BFO//Carbon black asymmetric supercapacitor (ASC) device can be charged and discharged reversibly at cell voltage of 0.0 up to 1.5 V when using a 0.5 M Na 2 SO 4 aqueous electrolyte. This configuration allows the ASC device to deliver a great energy density of 37.25 Wh/kg at a power density of 752 W/kg. The ASC device demonstrates excellent cycling stability, retaining 88.64 % of its initial specific capacitance after 5000 cycles. Increasing the Cu content up to 15 % causes instability in the crystal structure of BFO resulting on phase segregation into Bi 2 Fe 4 O 9 along with BFO and deterioration in the electrode overall performance. XPS showed that replacement of Cu 2+ in place of Bi 3+ disturbs the neutrality and the chemical environment of the compound. Hence to achieve neutrality and ionic balance, oxygen vacancies increase and the Fe 2+ /Fe 3+ ratio increases as well. Both oxygen vacancies and the change in the Fe ions ratio reduce electrochemical impedance and give rise to charge density. The homogenous distribution of the pores at x = 0.05 contributed greatly to its fast electrolyte ion diffusion that improved the observed capacitive properties. One has to mention here, that despite doping that contains ions with different ionic size and/or different oxidation state is unfavorable, to some extent, due to the changes they produce in the electronic structure and the chemical environment, nevertheless it is sometimes beneficial in creating new parameters in the structure that promote specific application like in the case of the current work, oxygen vacancies, increase in surface area and the mixed state valency.

Performance enhancement of asymmetric supercapacitors with bud-like Cu-doped Mn<sub>3</sub>O<sub>4</sub> hollow and porous structures on nickel foam as positive electrodes

Ni-MOF Nanosheet-Decorated MnS Hollow Microspheres As a P-N Heterojunction for High-Performance Supercapacitors

Manganese Doped Co3O4 Mesoporous Nanoneedle Array for Long Cycle-Stable Supercapacitors

Growth of CoMn-LDH/Co-Ni Bimetallic Sulfides on Nickel Foam with Enhanced Electrochemical Properties for Asymmetric Supercapacitors

Double‐Layer MnCo2S4@Ni‐Co‐S Core/Shell Nanostructure on Nickel Foam for High‐Performance Supercapacitor

3D heterostructure of 2D Y-doped Cu(OH)2 nanosheet supported by nickel foam as advanced electrodes for high performance supercapacitor

Cu powder decorated 3D Mn-MOF with excellent electrochemical properties for supercapacitors

MnOx nanosheets anchored on a bio-derived porous carbon framework for high-performance asymmetric supercapacitors

Electrochemical performance of all-solid-state asymmetric supercapacitors based on Cu/Ni-Co(OH)2/Co4S3 self-supported electrodes

MnO2@NiO nanosheets@nanowires hierarchical structures with enhanced supercapacitive properties

Superior performance of asymmetric supercapacitor based on Cu doped bismuth ferrite electrode

Ultrathin porous Mn(PO3)2 nanosheets and MoO2 nanocrystal arrays on N, P-dual-doped graphene for high-energy asymmetric supercapacitors

Three dimensional CoMoO<sub>4</sub> nanosheets on Nickel foam for high performance supercapacitors

Facile preparation of porous sheet-sheet hierarchical nanostructure NiO/Ni-Co-Mn-O x with enhanced specific capacity and cycling stability for high performance supercapacitors

Electrodeposition manganese oxide on Ni foam loaded graphene for high-performance supercapacitor

Stabilizing sulfur doped manganese oxide active sites with phosphorus doped hierarchical nested square carbon for efficient asymmetric supercapacitor

Tuning parallel manganese dioxide to hollow parallel hydroxyl oxidize iron replicas for high-performance asymmetric supercapacitors

An Asymmetric Supercapacitor Using Sandwich-Like Porous MXene/Ni 3S 4/cus Positive Electrode Exhibits Superior Electrochemical Performance

High-performance aqueous asymmetric supercapacitors with a cathode of MnCo2O4 nanowires sandwiched by NiCoMnS4 nanosheets on Ni foam

Smart construction of MnCo2O4 microspheres with multiple interiors: Morphological evolution and structure-performance relationship for supercapacitor electrodes

High performance asymmetric supercapacitor assembled by Co‐Mn LDHs coating on hollow MOF structure as positive electrode and MXene‐based composite as negative electrode