A potentially low-cost modified sawdust (MSD) effective for rapid Cr(<scp>vi</scp>) and As(<scp>v</scp>) removal from water

Linlin Hao,Qin Liu,Xilan Li,Zhaolin Du,Peng Wang

DOI: https://doi.org/10.1039/c4ra07395a

IF: 4.036

2014-01-01

RSC Advances

Abstract:A potentially low-cost modified sawdust (MSD) was effective for the rapid removal of Cr(<sc>vi</sc>) and As(<sc>v</sc>) from water.

What problem does this paper attempt to address?

A potentially low-cost modified sawdust (MSD) effective for rapid Cr(VI) and As(V) removal from water

linlin hao,qin liu,xilan li,zhaolin du,peng wang

DOI: https://doi.org/10.1039/c4ra07395a

IF: 4.036

2014-01-01

RSC Advances

Abstract:The study was carried out to evaluate the effectiveness of a diethylenetriamine (DETA)-crosslinked adsorbent prepared from pine sawdust for removing Cr(VI) and As(V) from aqueous solutions. The maximum adsorption capacity of Cr(VI) and As(V) by MSD was highly enhanced from 7.04 mg L-1 to 238.6 mg g(-1) and from 4.88 to 71.23 mg g(-1) at pH 6.0, respectively. The surface characterization of the MSD proved that the grafted amino groups were responsible for the good affinity towards Cr(VI) and As(V). The uptake of Cr(VI) and As(V) was highly dependent on the pH and was facilitated in acidic solutions. Batch experiments were conducted as a function of pH, temperature and contact time. Both Cr(VI) and As(V) adsorption equilibrium could be quickly attained within 1 h and the process followed the Redlich-Peterson isotherm model. As(V) uptake was more sensitive to an individual coexisting anion (Cl , SO42-, NO3-, HCO3-) in the system than Cr(VI). The mechanism of adsorption was characterized by the electrostatic attraction between the positively charged surface of sawdust and Cr(VI)/As(V) anions.
The Efficient Removal of Low Concentration Hexavalent Chromium Via Combining Charged Microporous Membrane and Micellar Adsorption Filtration

Wu-Shang Yang,Peng Zhang,Shu-Yang Shen,Qian-Wei Su,Ya-Ni Jiang,Jian-Li Wang,Ming-Yong Zhou,Ze-Lin Qiu,Bao-Ku Zhu

DOI: https://doi.org/10.1515/polyeng-2023-0052

IF: 1.624

2023-01-01

Journal of Polymer Engineering

Abstract:It is challenging to effectively purge wastewater containing heavy metal ions at low concentration. In order to remove trace Cr (VI) from wastewater efficiently, a positively charged microporous membrane was prepared by firstly non-solvent induced phase separation (NIPS) of amphiphilic polymer and secondly surface quaternization modification. The morphologies, surface roughness, surface charge, hydrophilicity, and pore size of membranes were characterized. Based on the dual action of micellar adsorption and charge repulsion, when surfactant is 4 mM and Cr (VI) is 60 ppm, the surface quaternization membrane (Q-MPVD) achieves 99.8 % Cr (VI) rejection simultaneously accompanied by a permeability of 100 LMH/bar. Meanwhile, the effects of STAC concentration, Cr (VI) concentration, pH as well as inorganic salt concentration on the composite micellar size, and Cr (VI) rejection performance were investigated, respectively. Moreover, the Q-MPVD membrane shows an excellent separation stability over a wide pH range, indicating its application perspective in engineering process. In summary, this work provided a positively charged membrane with high-efficiency performance for treating practical trace Cr (VI)-containing industrial wastewater.
Removal of Hexavalent Chromium Ions by Core-Shell Sand/mg-Layer Double Hydroxides (ldhs) in Constructed Rapid Infiltration System.

Chenguang Gao,Xiangling Zhang,Ye Yuan,Yu Lei,Jingtian Gao,Shuangjie Zhao,Chunyan He,Lichu Deng

DOI: https://doi.org/10.1016/j.ecoenv.2018.09.083

IF: 7.129

2018-01-01

Ecotoxicology and Environmental Safety

Abstract:This study aimed to determine the efficiencies and mechanisms of hexavalent chromium (Cr(VI)) removal with modified sand coated by Mg-LDHs in constructed rapid infiltration system (CRIS). Mg-LDHs (MgAl-LDHs, MgFe-LDHs) were prepared by co-precipitation method and in situ coated onto the surface of original sand. Scanning Electron Microscope (SEM) and X-Ray Fluorescence Spectrometer (XRFS) were used to analyze physicochemical properties of sand/Mg-LDHs composites. Results obtained confirmed the successful LDHs-coating modification. During the purification experiments, the average removal rates of Cr(VI) were 47.62% for sand/MgAl-LDHs, 34.15% for sand/MgFe-LDHs and 11.61% for original sand, respectively. The sand/Mg-LDHs had a higher Langmuir adsorption capacity and desorption capability for Cr(VI) compared to original sand. The adsorption kinetic data of different adsorbents were better described by pseudo-second-order model. Intra-particle diffusion model was also used to elucidate the adsorption mechanism. Moreover, extracellular polymeric substances, biomass and enzymatic activity of microbes on the modified and original sand were testified and analyzed to study microbial effect on Cr(VI) removal in test columns. Through a rough economic estimation, the reagent cost of sand/MgAl-LDHs synthesis was only RMB ¥ 0.24/Kg. It could be concluded that MgAl-LDHs modified sand is an efficient and economical substrate of CRIS for Cr(VI) removal.
Cr(Vi) Remediation By Enriched Sediment With Anthraquinone-2,6-Disulfonate As Electron Shuttles

Hong Chen,Xiaojuan Li,Zhiwei Xu

DOI: https://doi.org/10.1016/j.pce.2010.05.002

2011-01-01

Physics and Chemistry of the Earth, Parts A/B/C

Abstract:Hexavalent chromium (Cr(VI)) is a priority pollutant in the USA and many other countries. This study investigated the simultaneous remediation of Cr(VI) in sediment enriched with quinone-reducing microorganisms via a closely coupled, biotic-abiotic pathway. The results showed that Cr(VI) remediation was achieved by sediment adsorption and reduction of quinone-reducing microorganism. Moreover, microorganism reduction of Cr(VI) could be continued when sediment adsorption was saturated after long-term Cr(VI) remediation. The acetate and anthraquinone-2,6-disulfonate (AQDS), which acted as exogenous carbon and electron shuttle, respectively, were two crucial factors. The optimum concentrations of acetate and AQDS were 5 mM and 1 mM when the initial Cr(VI) concentration was 10 mg/L. AQDS was recycled, and it acted in a catalytic-type manner for the bacterial reduction of Cr(VI). Thus, biological humus reduction might provide an extensive pathway for the sequestration and detoxification of Cr(VI) in anaerobic soils, water, and industrial effluents. (c) 2010 Elsevier Ltd. All rights reserved.
Efficient removal of hexavalent chromium from wastewater using a novel sodium alginate-biochar composite adsorbent

Yushi Tian,Xiaolin Sun,Nianhua Chen,Xintong Cui,Hui Yu,Yujie Feng,Defeng Xing,Weihua He

DOI: https://doi.org/10.1016/j.jwpe.2024.105655

IF: 7

2024-06-16

Journal of Water Process Engineering

Abstract:Discharging hexavalent chromium (Cr(VI))-containing wastewater has become a critical environmental and ecological concern. Coffee grounds biochar (CGB), rich in oxygen-containing functional groups, can reduce Cr(VI) to the less toxic trivalent chromium (Cr(III)) without secondary contamination. This study developed a composite adsorbent by incorporating sodium alginate (SA) into CGB, exploiting their synergistic adsorption and ion exchange reduction effects for efficient Cr(VI) removal. The maximum adsorption capacity of SACGB, fitted by the Langmuir isotherm model, was 30.66 ± 1.89 mg/g. Under optimal conditions (pH = 2, SA: CGB mass ratio = 3:2, Cr(VI) concentration = 50 mg/L), SACGB achieved 99.79 % Cr(VI) removal from synthetic wastewater. Significant Cr(VI) reduction to Cr(III) (58.97 % removal) occurred at an SA:CGB ratio of 1:1. The adsorption mechanism involved hydrogen bonding, electrostatic interactions, and ion exchange reduction. Removal of Cr(VI) retained 93 % removal despite interference from coexisting Cu(II), Zn(II), and Ni(II) ions, and the ions promoted Cr(VI) adsorption onto SACGB. In actual wastewater, SACGB exhibited excellent Cr(VI) removal (99.26 %), meeting the Chinese industrial effluent discharge standard (0.2 mg/L). After 6 recycling cycles, SACGB demonstrated stable removal performance and contained no biotoxic components. The cost of preparation and adsorption process was analyzed and also compared with earlier studies to evaluate and highlight the economic feasibility of the adsorbent for a truly green removal method. This study highlights SACGB as an economical and efficient adsorbent with practical application potential for Cr(VI) removal from industrial wastewater.

engineering, chemical, environmental,water resources
A Microwave Synthesized Mesoporous Carbon Sponge As an Efficient Adsorbent for Cr(vi) Removal

Yan-Jun Liu,Shan Liu,Zhi-Wen Li,Ming-Guo Ma,Bo Wang

DOI: https://doi.org/10.1039/c8ra00012c

IF: 4.036

2018-01-01

RSC Advances

Abstract:Mesoporous carbon materials have recently attracted immense research interest because of their potential application in water purification fields. Herein, we report the synthesis of a mesoporous carbon sponge (MCS) from a supramolecular microcrystalline cellulose-polymer system triggered by microwave-assisted treatment. Benefiting from the three-dimensional (3D) interconnected mesopores and an evenly distributed ball-like protuberance on the inner surfaces of the macropores, the MCS exhibited a high adsorption capacity (93.96 mg g-1) for fast Cr(vi) removal within 5 min. Additionally, the MCS can be regenerated and reused after the adsorption-desorption process, and maintained an adsorption capacity of ∼86% after 10 cycles. The high adsorption capacity, significantly reduced treatment time, and reusability make the MCS promising for the purification of wastewater on a large scale.
Waste Carton-Derived Nanocomposites for Efficient Removal of Hexavalent Chromium.

Jie Han,Guilong Zhang,Linglin Zhou,Furu Zhan,Dongqing Cai,Zhengyan Wu

DOI: https://doi.org/10.1021/acs.langmuir.8b00225

IF: 3.9

2018-01-01

Langmuir

Abstract:A new nanocomposite (SCZ), microspherical carbon (SC) loaded with nanoscale zerovalent iron (ZVI), was fabricated to efficiently remove hexavalent chromium (Cr(VI)) in water. Therein, SC was derived from waste carton through hydrothermal treatment after pretreatment of removing hemicellulose and lignin, and the optimal hydrothermal conditions (200 °C, hydrothermal time of 12 h) for the preparation of SC were obtained. Subsequently, SC could effectively load ZVI nanoparticles which displayed high dispersion on the surface of SC and in the pores among SC particles owing to steric hindrance effect. The obtained SCZ displayed a high removal efficiency of 100% within 5 h on Cr(VI) (20 mg/L), and the resultant SCZ-Cr could be conveniently separated from water because of its magnetism. Importantly, SCZ could be loaded in cardboard, and the obtained system could serve as a stable filter for removal of Cr(VI) in water. This work provides a cheap and effective method for Cr(VI) removal, which also greatly facilitates the recycling of waste carton.
Ultra-efficient removal of aqueous hexavalent chromium by activated biochar nanoparticles derived from squid ink

Xiang Dai,Yingqi Luo,Jinhuan Deng,Junlin Wen,Yao He,Yong Yuan,Yi Wang

DOI: https://doi.org/10.1016/j.envres.2024.120185

2024-12-15

Abstract:Biochar have been recognized as efficient and renewable carbon sorbents, which attracted much attention on Cr contamination remediation in wastewater. In this study, we propose a cost-effective one-step strategy to synthesize activated biochar nanoparticles derived from squid ink (AS-BC) for aqueous Cr(VI) removal. The results demonstrated that AS-BC achieved a removal rate of 24.29 h-1 at 700 °C (400-times higher than the unmodified one). This was also a state-of-the-art removal performance for aqueous Cr(VI) compared to other reported materials. AS-BC possessed an enormous specific surface (2408 m2/g at 700 °C) with abundant O- and N-containing groups, condensed aromatic structures, and high electron transfer capacity (3.64 and 2.13 mmol e-/g for EAC and EDC at 700 °C), contributing to the ultra-efficient removal of Cr(VI) by synergistic adsorption and reduction. AS-BC absorbed Cr(VI) in the form of HCrO4- by electrostatic attraction with protonated amine-N and hydroxy (-NH3+ and -OH2+) groups and Cr(III) in the form of Cr3+ by complexation with amine-N and hydroxy groups. With a hydroxy-quinone and conjugated π-electron system, AS-BC served as mediator and shuttle to accelerate electron transfer in Cr(VI) reduction with an electron donor. Therefore, our findings highlight the immense potential of AS-BC biochar nanoparticles represent a potential alternative for high-performance Cr(VI) remediation in wastewater.
Removal of hexavalent chromium from aqueous solution using low-cost magnetic microspheres derived from alkali-activated iron-rich copper slag

Yu Wei,Liang He,Zhongqiu Luo,Xintao Zhou,Zhijie Zhang,Yunlong Luo,Qin Liu

DOI: https://doi.org/10.1016/j.jece.2023.110436

IF: 7.7

2023-07-08

Journal of Environmental Chemical Engineering

Abstract:The utilization of iron-rich copper smelting waste residues is a promising method to treat chromium (Cr(VI)) contaminated wastewater. Improving its recoverability and adsorption efficiency in the adsorption process is the key to their effective utilization. Based on this, magnetic copper slag-based alkali-activated microspheres (CS-AAMs) with controllable particle size were prepared under the activation of sodium silicate by mechanical dispersion-suspension solidification method and used as an efficient low-cost magnetic adsorbent for Cr(VI) removal. The capability of CS-AAMs for Cr(VI) removal was investigated under different conditions. A maximum adsorption capacity of 32.5 mg/g was achieved at the pH of 1. The adsorption capacity can keep 89.25% after four cycles adsorption-desorption experiments. The adsorption process follows pseudo-first-order kinetics and occurs spontaneously with an endothermic nature. Both intraparticle diffusion and chemical complexation controlled the adsorption process. Notably, the electrostatic attraction between Cr(VI) and CS-AAMs played a key role in the adsorption of Cr(VI). The adsorbed Cr(VI) was complexed and partially reduced under the action of active Fe(II) species in CS-AAMs. The findings indicate that the CS-AAMs prepared in this study can efficiently adsorb Cr(VI) from industrial effluents.

engineering, chemical, environmental
Application of response surface methodology to optimize chromium (VI) removal from aqueous solution using pre‐treated sawdust

Samin Sirusbakht,Leila Vafajoo,Gordon McKay,Prakash Parthasarathy

DOI: https://doi.org/10.1002/ep.14434

IF: 2.824

2024-06-07

Environmental Progress & Sustainable Energy

Abstract:Increased chromium usage in industrial applications as chromium III and chromium VI, include metal plating, steel alloys, leather processing, medical applications, and chromium dyeing operations, has resulted in water pollution by Cr (VI) ions, which being toxic and carcinogenic has developed into significant environmental and health problems. The purpose of this research is to remove Cr (VI) ions from synthetic wastewater utilising modified sawdust as an inexpensive adsorbent. Two modified sawdust samples were produced, one using sodium hydroxide and one using sulfuric acid. The experimentation, based on several batch systems, has been undertaken at 25–65°C with 0.5–1.5 g/L sawdust dosage. These conditions were applied to remove Cr (VI) ions at concentrations of 1–6 ppm at pH values from 3 to 10. The results have shown that adsorption onto sawdust followed an intraparticle diffusion mechanism with various rate parameters from 0.65 to 5.24 mg g−1 min, for treated and untreated sawdust. The distribution coefficient kc , enthalpy ΔH , thermodynamic standard free energy ΔG , and entropy ΔS were determined from a number of temperature studies. Kinetic studies showed that the pseudo‐second order model gave the optimum correlation to the experimental results. The Freundlich and Langmuir isotherms were applied to analyse the experimental equilibrium results. The optimised conditions for the adsorption process were obtained using the D‐optimal design method, and the maximum removal percentage of 100%, was determined at pH = 3, T = 25°C, adsorbent dosage = 1.5 g/L, and an initial Cr (VI) concentration = 5.72 ppm.

environmental sciences,green & sustainable science & technology,engineering, environmental, chemical
Enhanced removal of As(III) and As(V) from water by a novel zirconium-chitosan modified spherical sodium alginate composite

Sichao Lou,Bao Liu,Yan Qin,Yang Zeng,Wenqing Zhang,Lingfan Zhang

DOI: https://doi.org/10.1016/j.ijbiomac.2021.02.077

IF: 8.2

2021-04-01

International Journal of Biological Macromolecules

Abstract:Most nano-scaled adsorbents have trouble in separating from aqueous solution, thus, a need for new materials of facile separation and predominant adsorption performance has arisen. This present study focused on a novel segregative zirconium-chitosan modified sodium alginate (Zr-CTS/SA) composite preparation and its performance for As(III/V) removal from aqueous solution. The obtained composite presented a spherical structure with a diameter of 2.0–3.0 mm and favorable thermal stability. Experimental data showed that Zr-CTS/SA had considerable adsorbability for As(III) and As(V), the adsorption capacities were enhanced about at least 20 and 6 times separately compared with pristine SA beads. The adsorption processes of As(III) and As(V) could both be described with Langmuir isotherm model and the maximum adsorption capacities reached 43.19 and 76.78 mg g−1, respectively. The kinetic data of As(III) followed the intra-particle diffusion model while As(V) fitted the pseudo-first-order model. Moreover, the adsorption mechanisms of As(III/V) involved ligand exchange with Cl on the surface of Zr-CTS/SA, another reaction pathway for As(V) was the electrostatic attraction with protonated -OH and -NH2 groups. Note that the employment of Zr-CTS/SA in low-concentration arsenic solution exhibited a residue concentration as low as the 10 μg L−1 WHO guideline for drinking water.

polymer science,biochemistry & molecular biology,chemistry, applied
Efficient removal of Cr (VI) by modified sodium alginate via synergistic adsorption and photocatalytic reduction

Xiangpeng Gao,Cheng Guo,Junjie Hao,Yan Zhang,Mingyang Li,Zhuo Zhao

DOI: https://doi.org/10.1016/j.apsusc.2021.152259

IF: 6.7

2022-03-01

Applied Surface Science

Abstract:Conventional photocatalytic removal of hexavalent chromium (Cr (VI)) suffers from low metal uptake capacity, expensive photocatalysts, and slow desorption of trivalent chromium from the catalyst surface. In this study, calcium chloride and iron(III) nitrate were used to cross-link with polyethyleneimine grafted sodium alginate (SA) to acquire two materials, named as SPC and SPF, respectively, for the efficient removal of Cr (VI) from aqueous solutions via adsorption and photocatalytic reduction. FT-IR, DFT, and XPS results indicated that polyethyleneimine was successfully grafted onto the SA matrix and could electrostatically attractted hexavalent chromium anions in solution. Fe (III) cross-linking forms a highly porous structure at ambient temperature, which could overcome the polysaccharide collapse in the dehydration process. The UV–vis DRS, EIS, and photocurrent density characterizations of SA, SPC, and SPF suggested that SPF has smaller charge transfer resistance and is conducive to the separation of photogenerated charges, thus SPF exhibited superior performance in the photocatalytic reduction of Cr (VI). As a result, SPF is an efficient photocatalyst for the removal of Cr (VI) and provides new sights on polysaccharide-based photocatalysts applications.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Electrospinning Chitosan/Fe-Mn Nanofibrous Composite for Efficient and Rapid Removal of Arsenite from Water

Lingli Min,Yahui Ma,Bi Zhang,Dulan He,Jinhua Chen,Xuerong Li,Shuhua Wang,Yulang Chi

DOI: https://doi.org/10.3390/toxics12030230

2024-03-22

Toxics

Abstract:Efficient removal of extremely mobile and toxic As(III) from water is a challenging but critical task. Herein, we developed a functionalized sorbent of chitosan nanofiber with iron–manganese (Fe-Mn@CS NF) using a one-step hybrid electrospinning approach to remove trace As(III) from water. Batch adsorption studies were performed to determine the adsorption efficiency under a variety of conditions, including contact time, starting concentration of As(III), ionic strength, and the presence of competing anions. The experimental results demonstrated that the concentration of As(III) dropped from 550 to less than 1.2 μg/L when using 0.5 g/L Fe-Mn@CS NF. This demonstrates the exceptional adsorption efficiency (99.8%) of Fe-Mn@CS NF for removing As(III) at pH 6.5. The kinetic tests revealed that the adsorption equilibrium was reached in 2.6 h, indicating a quick uptake of As(III). The ionic strength effect analysis showed that the adsorbed As(III) formed inner-sphere surface complexes with Fe-Mn@CS NF. The presence of SO42− or F− had a negligible impact on As(III) uptake, while the presence of PO43− impeded As(III) absorption by competing for adsorption sites. The exhausted sorbent could be effectively regenerated with a dilute NaOH solution. Even after 10 cycles of regenerating Fe-Mn@CS NF, the adsorption efficiency of As(III) in natural groundwater was maintained over 65%. XPS and FTIR analyses show that the presence of M–OH and C–O groups on the sorbent surface is essential for removing As(III) from water. Overall, our study highlights the significant potential of Fe-Mn@CS NF for the efficient and quick elimination of As(III) from water.

environmental sciences,toxicology
Separatable polydopamine-coated cobalt-chitosan beads for Cr(VI) removal from wastewater with superior capacity

Yimin Huang,Xueyan Li,Yan Peng,Hua Zhang,Anxian Shi,Xiujun Deng,Baoling Wang,Yingtang Zhou,Bing Wang,Guangzhi Hu

DOI: https://doi.org/10.1016/j.jece.2023.111100

IF: 7.7

2023-10-07

Journal of Environmental Chemical Engineering

Abstract:The discharge of hexavalent chromium [Cr(VI)] in industrial wastewater into the natural environment can seriously cause harm to the environment and human health. We modified chitosan (CS) with Co and polydopamine (PDA) to synthesize a spherical adsorbent (CS–Co/PDA HCl ) for Cr(VI) removal from wastewater. Co doping can help CS–Co/PDA HCl maintain a high adsorption capacity (666.7 mg g -1 ) for Cr (VI) while retaining a complete bead shape after multiple recycling. In addition, CS–Co/PDA HCl can maintain 96% of its initial adsorption capacity after five adsorption cycles, demonstrating a strong regeneration ability. Under competitive conditions, the adsorption capacity of CS–Co/PDA HCl for Cr(VI) greatly exceed its adsorption capacity for Ni (II) and Mn (II). Because of the high selectivity of CS–Co/PDA HCl for Cr(VI), 1 kg of CS–Co/PDA HCl (cost approximately $31) could reduce the concentration of Cr(VI) in 87 m 3 of secondary electroplating wastewater containing various complex components to the drinking water standard. Owing to the high selective adsorption capacity of CS–Co/PDA HCl for Cr(VI) and its good regeneration ability and expected economic feasibility, CS–Co/PDA HCl can find potential applications in removing Cr(VI) from real wastewater.

engineering, chemical, environmental
Fast and Efficient Removal of Cr(VI) to Ppb Level Together with Cr(III) Sequestration in Water Using Layered Double Hydroxide Interclated with Diethyldithiocarbamate.

Lixun Zhang,Fangxin He,Wei Mao,Yuntao Guan

DOI: https://doi.org/10.1016/j.scitotenv.2020.138701

2020-01-01

Abstract:It is still a great challenge to find an eco-friendly, easy-to-synthesize, and cheap adsorbent to rapidly remove Cr (VI) to ppb level in the Cr(VI)-polluted water. Herein, a new layered double hydroxide nanocage intercalated with diethyldithiocarbamate (DDTC-LDH) was fabricated via a facile calcination-rehydration method. The DDTC-LDH rapidly decreased Cr(VI) concentration from 5 to <0.05 mg/L within 35 min, and only a few seconds were required to completely remove it at an initial concentration of 0.5-1mg/L, primarily attributed to the effective adsorption-reduction of Cr(VI) to Cr(III) by sulfur atoms in C-S and C=S groups. Attractively, the generated Cr(III) was also quickly removed to below 0.1 mg/L via an opportune Lewis hard-hard interaction with C-SOx groups produced through C-S oxidation. Additionally, Cr(VI) could be removed by DDTC-LDH at a wide pH application range (3.17-10.78) and with weak effects by coexisting anions (Cl-, NO3-, CO32-, SO42-, and PO43-). We systematically analyzed and proposed the mechanisms for Cr(VI) removal by the DDTC-LDH, orderly containing electrostatic attraction, Cr(VI) complexation by sulfur atoms in C-S and C=S groups, reduction of the Cr(VI) to Cr(III) by the C-S and C=S groups, and Cr(III) complexation by sulfur atoms in C-SOx groups. Our results provide new insights into the Cr(VI) removal using organosulfur compounds, that is to say, the organosulfur group Lewis hardness increased (from C-S to C-SOx) as the Cr species Lewis hardness increased (from Cr(VI) to Cr(III)), so as to opportunely ensure fast and efficient capture of both Cr(VI) and Cr(III) via Lewis acid-base interactions. (C) 2020 Elsevier B.V. All rights reserved.
Highly Efficient As(V)/Sb(V) Removal by Magnetic Sludge Composite: Synthesis, Characterization, Equilibrium, and Mechanism Studies

Li Wang,Jingmei Wang,Ren Zhang,Xingang Liu,Guoxin Song,Xiaofeng Chen,Yi Wang,Jilie Kong

DOI: https://doi.org/10.1039/c6ra06208c

IF: 4.036

2016-01-01

RSC Advances

Abstract:The development of inexpensive and effective adsorbents for the highly efficient removal of arsenic (As) and antimony (Sb) from water is of great importance for the environment and human health. In the present study, magnetic bio-sludge (MS) containing activated sludge and magnetite (Fe3O4) nanoparticles (diameter: 2–25 nm) was investigated as an adsorbent. MS was synthesized by a facile co-precipitation method and characterized using various physicochemical methods. MS featured a macroporous structure with a surface area of 78 m2 g−1 and a pore volume of 0.53 cm3 g−1. MS could be readily and easily separated from water using an external magnetic field. Importantly, MS could be applied for the removal of As(V) and Sb(V) contaminants from water. It exhibited high stability, ultrafast adsorption/separation rates, and a large adsorption capacity. Moreover, it achieved near-complete removal of As(V) and Sb(V) in 10 μg L−1 solutions. Its high adsorption performance was almost unaffected by the presence of ion interferents in solution. Thus, the present study demonstrates the potential of MS as an adsorbent for the removal of As(V) and Sb(V) from groundwater to meet environmental and public health standards.
Effective Removal of Hexavalent Chromium from Aqueous Solutions by Adsorption on Mesoporous Carbon Microspheres

Jianguo Zhou,Yuefeng Wang,Jitong Wang,Wenming Qiao,Donghui Long,Licheng Ling

DOI: https://doi.org/10.1016/j.jcis.2015.10.001

IF: 9.9

2016-01-01

Journal of Colloid and Interface Science

Abstract:High-surface-area mesoporous carbon microspheres were successfully synthesized by a spraying method with the purpose of removing Cr(VI) from waste water. Various factors influencing the adsorption of Cr(VI), including pH, adsorption temperature, and contact time were studied. As the adsorption process was pH dependent, it showed maximum removal efficiency of Cr(VI) at pH 3.0. Pseudo-second-order model was found to best represent the kinetics of Cr(VI) adsorption. The adsorption parameters were determined using both Langmuir and Freundlich isotherm models, and Qm value was as high as 165.3mg/g. The thermodynamic parameters including standard Gibb's free energy (ΔG(0)), standard enthalpy (ΔH(0)) and standard entropy (ΔS(0)) were investigated for predicting the nature of adsorption, which suggested the adsorption was an endothermic and a spontaneous thermodynamically process. Furthermore, Fe3O4-loaded MCMs were prepared to rapidly separate the adsorbent from the solution by a simple magnetic process. Fe3O4-loaded MCMs had a high adsorption capacity of 156.3mg/g, and a good regeneration ability with a capacity of 123.9mg/g for the fifth adsorption-desorption cycle.
Effective removal and expedient recovery of As(V) and Cr(VI) from soil by layered double hydroxides coated waste textile

Shifeng Zhao,Zhaosong Li,Haiyan Wang,Hanhan Huang,Caifeng Xia,Derui Liang,Junshan Yang,Qian Zhang,Zilin Meng

DOI: https://doi.org/10.1016/j.seppur.2021.118419

IF: 8.6

2021-05-01

Separation and Purification Technology

Abstract:Mg-Al layered double hydroxides coated waste textile () was prepared by an in-suit method for the separation of toxic metal ions such as As(V) and Cr(VI) from soil samples. Kinetics studies of As(V)/Cr(VI) removal by with different Mg/Al ratio were well described by intraparticle diffusion and pseudo-second-order model. Adsorption isotherm data of As(V)/Cr(VI) yielded a better accordance of Langmuir model, manifesting that accessible adsorption site was the main influence factor and the removal of As(V)/Cr(VI) was a charge-limited process. The adsorption capacity was 69.8mg/g, 49.8 mg/g, 45.6 mg/g and 38.2 mg/g by Mg2, Mg3, Mg4 and LDHs, and for Cr(VI) were 27.5 mg/g, 24.9 mg/g, 19 mg/g and 6.8 mg/g, respectively. Adsorption behavior of As(V) and Cr(VI) co-existing in soil indicated that As(V) possess a preferential adsorption rather than Cr(VI) by Mg2, and molecular simulation was selected to explain the results of competitive relationship by bonding energy and variation of bond length. The effect of co-existing ions, column leaching experiment and recycle experiment for practical performance assessment were also examined, and these results revealed a high stability and a good partition capability. The performance of excellent removal and convenient recovery suggested a promising strategy in anionic heavy metals contaminated soil.

engineering, chemical
Enhanced Simultaneous Removal of Cr(vi) and Cd(ii) from Aqueous Solution and Soil: a Novel Carbon Microsphere–calcium Alginate Supported Sulfide-Modified Nzvi Composite

Weiyu Liang,Yihao Shen,Chen Xu,Dongqing Cai,Dongfang Wang,Kailun Luo,Xuechun Shao,Zhihua Qiao,Wei Zhang,Cheng Peng

DOI: https://doi.org/10.1039/d2en00483f

2022-01-01

Environmental Science Nano

Abstract:Industrial production activities commonly lead to excessive hexavalent chromium [Cr(vi)] and cadmium [Cd(ii)] release to water and soil, which significantly endanger the ecological environment and human health.
Surface Modified Leaves with High Efficiency for the Removal of Aqueous Cr (VI)

Yu Zhang,Miao Li,Jiacheng Li,Yanyan Yang,Xiang Liu

DOI: https://doi.org/10.1016/j.apsusc.2019.04.088

IF: 6.7

2019-01-01

Applied Surface Science

Abstract:The pollution of chromium wastewater is becoming more and more serious. Biological adsorption of hexavalent chromium (Cr (VI)) is an effective waste water treatment technology. In this work, non-treated leaves (NL), sulfuric acid modified leaves (SL), and hexadecyl trimethyl ammonium bromide (CTAB) modified leaves (CL) were used to remove Cr (VI) from the water. Indeed, leaves are highly effective and low-cost biosorbents, and were proven to achieve a recovery of resources from waste. In the batch experiments, the adsorption of Cr (VI) onto SL and CL was shown to be influenced by several factors, including the initial pH of the solution, the adsorbent dosage, and temperature. The X-ray Photoelectron Spectroscopy (XPS) results suggest that the reduction of Cr (VI) to the less harmful trivalent chromate Cr (III) occurred during the adsorption processes; this was followed by Cr (III) adsorption onto the surface of the adsorbents. The maximum adsorption capacities obtained for Cr (VI) at 35 degrees C were 170.8 and 137.9 mg/g for SL and CL at pH 2, respectively. The results show that SL and CL, as cheap and effective biosorbents of Cr (VI), realized the recycling of wastes and have good application prospects.

A potentially low-cost modified sawdust (MSD) effective for rapid Cr(<scp>vi</scp>) and As(<scp>v</scp>) removal from water

A potentially low-cost modified sawdust (MSD) effective for rapid Cr(VI) and As(V) removal from water

The Efficient Removal of Low Concentration Hexavalent Chromium Via Combining Charged Microporous Membrane and Micellar Adsorption Filtration

Removal of Hexavalent Chromium Ions by Core-Shell Sand/mg-Layer Double Hydroxides (ldhs) in Constructed Rapid Infiltration System.

Cr(Vi) Remediation By Enriched Sediment With Anthraquinone-2,6-Disulfonate As Electron Shuttles

Efficient removal of hexavalent chromium from wastewater using a novel sodium alginate-biochar composite adsorbent

A Microwave Synthesized Mesoporous Carbon Sponge As an Efficient Adsorbent for Cr(vi) Removal

Waste Carton-Derived Nanocomposites for Efficient Removal of Hexavalent Chromium.

Ultra-efficient removal of aqueous hexavalent chromium by activated biochar nanoparticles derived from squid ink

Removal of hexavalent chromium from aqueous solution using low-cost magnetic microspheres derived from alkali-activated iron-rich copper slag

Application of response surface methodology to optimize chromium (VI) removal from aqueous solution using pre‐treated sawdust

Enhanced removal of As(III) and As(V) from water by a novel zirconium-chitosan modified spherical sodium alginate composite

Efficient removal of Cr (VI) by modified sodium alginate via synergistic adsorption and photocatalytic reduction

Electrospinning Chitosan/Fe-Mn Nanofibrous Composite for Efficient and Rapid Removal of Arsenite from Water

Separatable polydopamine-coated cobalt-chitosan beads for Cr(VI) removal from wastewater with superior capacity

Fast and Efficient Removal of Cr(VI) to Ppb Level Together with Cr(III) Sequestration in Water Using Layered Double Hydroxide Interclated with Diethyldithiocarbamate.

Highly Efficient As(V)/Sb(V) Removal by Magnetic Sludge Composite: Synthesis, Characterization, Equilibrium, and Mechanism Studies

Effective Removal of Hexavalent Chromium from Aqueous Solutions by Adsorption on Mesoporous Carbon Microspheres

Effective removal and expedient recovery of As(V) and Cr(VI) from soil by layered double hydroxides coated waste textile

Enhanced Simultaneous Removal of Cr(vi) and Cd(ii) from Aqueous Solution and Soil: a Novel Carbon Microsphere–calcium Alginate Supported Sulfide-Modified Nzvi Composite

Surface Modified Leaves with High Efficiency for the Removal of Aqueous Cr (VI)