Abstract:Cathode buffer layer (CBL) is one of the key issues influencing the performance of organic solar cells. In this article, a nanocomposite of zinc oxide nanoparticles (ZnO) together with a conjugated polymer, poly[(9,9-bis(3'-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctyl)-fluorene] (PFN) was developed, and used as the CBL for solution processed inverted organic solar cells (OSC). In comparison with the bare ZnO, PFN or ZnO/PFN stacked layer, the ZnO:PFN nanocomposite CBL employing device showed superior device performance, in particular significantly improved fill factor. Optimized power conversion efficiency (PCE) of P3HT:PC61BM and PTB7:PC61BM device using ZnO:PFN composite CBLs reached to 3.56% and 7.17%, respectively. Influences of the mixing ratio and the layer thickness of the ZnO:PFN nanocomposite CBL on solar cell performance were carefully studied, and results indicated that ZnO:PFN CBL showed a wide tolerance of blend ratio and layer thickness. In particular, no obvious thickness dependent-device performance was found, even when the CBL layer thickness was higher than 125nm, providing a good printing processibility of the nanocomposite. Photoelectron spectroscopy, photoluminescence, as well as electric conductivity of the ZnO:PFN films were studied, and the results were compared with that of the other three reference CBLs. Results demonstrated that the interaction between ZnO and PFN decreases the work function of the blended film, leading to a more favorable energy level alignment for electron injection at the interface. Analysis on the dark J–V curves of the solar cells revealed that device using ZnO:PFN CBL had the best diode characteristics including lowest reverse saturated current density (J0), ideal factor (n), and series resistance (Rs), and highest shunt resistance (Rsh). Such an improvement was ascribed to the defect passivation by the conjugated polymer, which led to an improved charge carrier selectivity of the CBL and consequently enhanced the FF of the solar cells. In addition, long-term stability of organic solar cells was also improved by using ZnO:PFN nanocomposite as the CBL. The current work provides a valuable guideline for the development of high performance cathode buffer layer material for printable organic solar cells.

Fullerene Derivative‐Doped Zinc Oxide Nanofilm As the Cathode of Inverted Polymer Solar Cells with Low‐Bandgap Polymer (ptb7‐th) for High Performance

A High Performance Inverted Organic Solar Cell with a Low Band Gap Small Molecule (P-Dts(fbtth2)2) Using a Fullerene Derivative-Doped Zinc Oxide Nano-Film Modified with a Fullerene-Based Self-Assembled Monolayer As the Cathode

Physically Adsorbed Fullerene Layer on Positively Charged Sites on Zinc Oxide Cathode Affords Efficiency Enhancement in Inverted Polymer Solar Cell.

Dual Functional Zwitterionic Fullerene Interlayer for Efficient Inverted Polymer Solar Cells

[6,6]-Phenyl-c61-butyric Acid 2-((2-(dimethylamino)ethyl)(methyl)amino)-ethyl Ester As an Acceptor and Cathode Interfacial Material in Polymer Solar Cells

Efficient Inverted Organic Solar Cells Based On A Fullerene Derivative-Modified Transparent Cathode

Investigating the Role of Cathode Buffer Layers based on Zinc Oxide with Surface‐rich Graded Fullerene Isomers in Tuning the Interfacial Properties of Organic Solar Cells

Hydroxyl-Terminated CuInS2-Based Quantum Dots: Potential Cathode Interfacial Modifiers for Efficient Inverted Polymer Solar Cells.

Enhanced Performance of Inverted Non-Fullerene Organic Solar Cells Through Modifying Zinc Oxide Surface with Self-Assembled Monolayers

Organic Photovoltaics: Dual Functional Zwitterionic Fullerene Interlayer for Efficient Inverted Polymer Solar Cells (adv. Energy Mater. 14/2015)

Effect of Chemical Modification of Fullerene-Based Self-Assembled Monolayers on the Performance of Inverted Polymer Solar Cells

Zinc Oxide: Conjugated Polymer Nanocomposite As Cathode Buffer Layer for Solution Processed Inverted Organic Solar Cells

Efficient and Stable Inverted Perovskite Solar Cells Enabled by a Fullerene‐Based Hole Transport Molecule

Conductive Water/Alcohol-Soluble Neutral Fullerene Derivative As an Interfacial Layer for Inverted Polymer Solar Cells with High Efficiency

Single Junction Inverted Polymer Solar Cell Reaching Power Conversion Efficiency 10.31% by Employing Dual-Doped Zinc Oxide Nano-Film As Cathode Interlayer

High Electron Mobility Zno Film for High-Performance Inverted Polymer Solar Cells

Enhanced Efficiency Of Polymer: Fullerene Bulk Heterojunction Solar Cells With The Insertion Of Thin Tio2

The Performance Comparison Between Fullerene and Nonfullerene Interlayers in Inverted Organic Solar Cells

Bandgap Tunable Zn1‐xMgxO Thin Films as Highly Transparent Cathode Buffer Layers for High‐Performance Inverted Polymer Solar Cells

Inverted Polymer Solar Cells with a Solution-Processed Zinc Oxide Thin Film As an Electron Collection Layer

Improved Efficiency and Stability in Polymer Solar Cells Using a Tetra-nuclear Zinc(II) Complex Interfacial Layer