Abstract:Ultra-high performance concrete (UHPC) has a high self-healing capacity and is prone to bursting after exposure to high temperatures due to its characteristics. This work evaluates the damage and improvement of UHPC with coarse aggregates through mechanical properties (compressive strength and ultrasonic pulse velocity), transport properties (water absorption and a chloride diffusion test), and micro-properties such as X-ray diffraction (XRD), Mercury intrusion porosimetry (MIP), and Scanning electronic microscopy (SEM). The result demonstrates that polypropylene (PP) fibers are more suitable for high temperature tests than polyacrylonitrile (PAN) fibers. The result shows that 400 °C is the critical temperature point. With the increase in temperature, the hydration becomes significant, and the internal material phase changes accordingly. Although the total pore volume increased, the percentage of various types of pores was optimized within 400 °C. The mass loss gradually increased and the ultrasonic pulse velocity gradually decreased. While the compressive strength first increased and then decreased, and the increase occurred within 25–400 °C. As for the transport properties, the chloride migration coefficient and capillary absorption coefficient both increased dramatically due to the higher sensitivity to temperature changes. The results of the property improvement test showed that at temperatures above 800 °C, the compressive strength recovered by more than 65% and the ultrasonic pulse velocity recovered by more than 75%. In terms of transport properties, compared to the results before self-healing, the chloride migration coefficient decreased by up to 59%, compared with 89% for the capillary absorption coefficient, after self-healing at 800 °C. With respect to the enhancement effect after exposure to high temperatures, the environment of a 5% Na2SO4 solution was not as good as the clean water environment. The corresponding changes in microstructure during the high temperatures and the self-healing process can explain the change in the pattern of macroscopic properties more precisely.

Mechanical Properties and Microstructure of Ultra-High-Performance Concrete Containing Recycled Aggregates Co-Modified with Steel Fibres and Nanosilica after Exposure to Elevated Temperatures

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

Effects of High Temperature and Substitution Rates of Fly Ash on the Mechanical Properties and Microstructures of Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites

Mechanical Properties of Hybrid Fibers and Nano Silica Reinforced Concrete During Exposure to Elevated Temperatures

Mechanical and Microstructural Properties of Ultra-High Performance Concrete with Lightweight Aggregates

Correlation Between Macroscopic Properties and Microscopic Pore Structure in Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites Subjected to Elevated Temperatures

Transport Properties and Resistance Improvement of Ultra-High Performance Concrete (UHPC) after Exposure to Elevated Temperatures

The Treated Recycled Aggregates Effects on Workability, Mechanical Properties and Microstructure of Ultra-High Performance Concrete Co-reinforced with Nano-Silica and Steel Fibers

Experimental study on flexural performance of ultra-high-performance concrete with recycled aggregate co-modified by nano-silica and steel fiber

Influence of High Temperatures on the Mechanical and Microstructural Properties of Hybrid Steel-Basalt Fibers Based Ultra-High-performance Concrete (UHPC)

Study on Micro-mesoscale Characterization and Impact Load Mechanical Properties of Ultra-High-Performance Concrete After Sustained Elevated Temperature

Microstructure and mechanical behaviour of 3D printed ultra-high performance concrete after elevated temperatures

Effect of Multiscale Fibers and Cenospheres on the Uniaxial Tensile Behavior of Ultra-High Performance Concrete Subjected to High Temperatures

Experimental Study and Analytical Modeling of Tensile Performance of Ultra-High-Performance Concrete Incorporating Modified Recycled Aggregates

Study of Ultra-High Performance Concrete Mechanical Behavior under High Temperatures

Utilization of Hybrid Sisal and Steel Fibers to Improve Elevated Temperature Resistance of Ultra-High Performance Concrete

Effects of Heating Followed by Water Quenching on Strength and Microstructure of Ultra-High Performance Concrete

The Mechanical Properties and Failure Mechanisms of Steel-Fiber- and Nano-Silica-Modified Crumb Rubber Concrete Subjected to Elevated Temperatures

Experimental study on the thermal properties of a novel ultra-high performance concrete reinforced with multi-scale fibers at elevated temperatures

Improvement effect of fiber alignment on resistance to elevated temperature of ultra-high performance concrete

Revealing the Role of Multi-Scale Fibers in the Compressive Behavior of a Novel Ultra-High Performance Concrete Subjected to Elevated Temperatures