Abstract:Direct air capture (DAC) can be used to decrease the CO2 concentration in the atmosphere, but this requires substantial energy consumption. If residual waste carbon (in the form of bicarbonate solution) from DAC can be directly reused, it might present a novel method for overcoming the aforementioned challenges. Electrochemical CN coupling methods for synthesizing urea have garnered considerable attention for waste carbon utilization, but the carbon source is high-purity CO2. No research has been conducted regarding the application of bicarbonate solution as the carbon source. This study proposes a proof-of-concept electrochemical CN coupling process for synthesizing urea using bicarbonate solution from DAC as the carbon source and nitrate from wastewater as the nitrogen source. These results confirmed the feasibility of synthesizing urea using a three-electrode system employing TF and CuInS2/TF as the working electrodes via potentiostatic electrolysis. Under the optimal conditions (initial pH 5.0 and applied potential of -1.3 V vs. Ag/AgCl), the urea yield after 2 h of electrolysis reached 3017.2 μg h-1 mgcat.-1 and an average Faradaic efficiency of 19.6 %. The in-situ attenuated total reflection surface-enhanced infrared absorption spectroscopy indicated a gradual increase in the intensity of the -CONH bond signal on the surface of the CuInS2/TF electrode as the reaction progressed. This implied that this bond may be a key chemical group in this process. The density functional theory calculations demonstrated that *CONH was a pivotal intermediate during CN coupling, and a two-step CN coupling reaction path was proposed. *NH + *CO primarily transformed into *CONH, followed by the conversion reaction of *CONH + *NO to *NOCONH2. This study offers a groundbreaking approach for waste carbon utilization from DAC and holds the potential to furnish technical underpinnings for advancing electrochemical CN coupling methods.

Urea Electrosynthesis in Microbial Electrolysis Cells Using Low-cost Fe–N–C for Simultaneous N<sub>2</sub> and CO<sub>2</sub> Reduction

Urea Electrosynthesis in Microbial Electrolysis Cells Using Low-cost Fe-N-C for Simultaneous N-2 and CO2 Reduction

Selective electrochemical synthesis of urea from nitrate and CO 2 via relay catalysis on hybrid catalysts

Efficient urea electrosynthesis from carbon dioxide and nitrate via alternating Cu–W bimetallic C–N coupling sites

Exploration of a novel electrochemical CN coupling process: Urea synthesis from direct air carbon capture with nitrate wastewater

Efficient urea electrosynthesis via coordination of the reaction rate of carbon dioxide and nitrate co‐reduction

Catalysts for C-N Coupling in Urea Electrosynthesis under Ambient Conditions from Carbon Dioxide and Nitrogenous Species.

Carbon Dioxide and Nitrate Electrocatalytic C-N Coupling for Sustainable Production of Urea

Booming electrocatalysts for urea synthesis via nitrogen-integrated carbon dioxide reduction reaction

Efficient Electrochemical Co‐Reduction of Carbon Dioxide and Nitrate to Urea with High Faradaic Efficiency on Cobalt‐Based Dual‐Sites

Spatial Management of CO Diffusion on Tandem Electrode Promotes NH 2 Intermediate Formation for Efficient Urea Electrosynthesis

Electrocatalytic Urea Synthesis with 63.5 % Faradaic Efficiency and 100 % N-Selectivity via One-step C-N coupling

Electrocatalytic Urea Synthesis via C-N Coupling from CO 2 and Nitrogenous Species

Recent Progress in Electrochemical Synthesis of Urea Through C-N Coupling Reactions

Urea Synthesis via Coelectrolysis of CO2 and Nitrate over Heterostructured Cu-Bi Catalysts

Electrocatalytic Urea Synthesis via C‐N Coupling over Fe‐Based Catalyst

Urea Electrosynthesis Accelerated by Theoretical Simulations

Selective electrosynthesis of urea <i>via</i> C-N coupling: Current status, challenges and future prospects

Rectifying Heterointerface Facilitated C‐N Coupling Dynamics Enables Efficient Urea Electrosynthesis Under Ultralow Potentials

Recent advances in electrocatalytic C−N coupling for urea synthesis

Ambient electrosynthesis of urea with nitrate and carbon dioxide over a CuRu alloy catalyst