Abstract:To purify and recycle the low-carbon alcohols and acids in wastewater by a green method with high efficiency is of great significance in chemical engineering process, such as indirect coal liquefaction (Fischer Tropsch Synthesis, FTS), which produces a large amount of alcohol and acid-containing wastewater. Adsorption-desorption of low-carbon alcohols and acids in wastewater by activated carbon is a promising method for industrial application. The adsorption capacity of low-carbon alcohols and acids in activated carbons is closely related with their pore and surface properties. However, this was seldom studied due to the complex properties of carbon materials with different pore size, distribution and volume, as well as surface area and hydrophobicity. In this work, four commercial activated carbon materials (AC1 ∼ 4) with similar hydrophobicity and different pore and surface structure were chosen to explore the possible correlation of the adsorption capacity of C1-5 alcohols, C2-4 acids and FTS modeling wastewater. The batch method was used to investigate the adsorption capacity of AC1 ∼ 4 on low-carbon alcohols and acids as well as FTS modeling wastewater; while density functional theory (DFT) calculation was performed to investigate the adsorption energies of low-carbon alcohols and acids in carbon nanotubes with different pore sizes. Both the experimental and theoretical results indicate that the adsorption capacities of methanol, ethanol and acetic acid are strongly dependent on the ultra-micropores (<0.9 nm) due to their small molecular weight; and the adsorption capacity of pentanol is mainly determined by the surface areas due to its relatively high molecular weight and low polarity; while the adsorption capacities of C3-C4 alcohols and acids are well correlated with the microporous volume and surface area. In addition, and the adsorption capacities of acids were also related with the content of surface COOH species. AC2 has the highest adsorption capacity of mixed low-carbon alcohols and acids (196.2 mg/g) in FTS modeling wastewater due to its abundant ultra-micropore and high specific surface area. This work sheds light into the development of adsorbents with high adsorption capacity of low-carbon alcohols and acids, and provides solid experimental and theoretical support in the further purification of FTS wastewater and recovery of valuable chemicals.

Alumina microspheres for the adsorption of fatty alcohols containing oxygenates in Fischer-Tropsch synthetic oils

Aluminum-based Metal Organic Frameworks for Greenhouse Gases CF4 and C2F6 Capture with Excellent Capacity and Selectivity

One-step Removal of Alkynes and Propadiene from Cracking Gases Using a Multi-Functional Molecular Separator

Selective adsorption of liquid long-chain α-olefin/paraffin on Mg-MOF-74: Adsorption behavior and interaction mechanism

A Further Catalysis Mechanism Study on Amberlyst 35 Resins Application in Alkylation Desulfurization of Gasoline

Experimental and theoretical study of the adsorption of mixed low carbon alcohols and acids from Fischer Tropsch synthesis wastewater by activated carbon

Efficient Fischer–Tropsch Microreactor with Innovative Aluminizing Pretreatment on Stainless Steel Substrate for Co/Al2O3 Catalyst Coating

Deciphering the mass transfer and diffusion behavior in the oxidation of fatty alcohols to fatty acids over Pt/MCM-41

Clean utilization of olefins in FT synthetic oil: Adsorption separation of C8 α-olefin/paraffin by simulated moving bed

Fluorine-functionalized mesoporous alumina materials with superhydrophobic surfaces

Hydrophobicity and Pore Structure: Unraveling the Critical Factors of Alcohol and Acid Adsorption in Zeolites

Direct imaging and mechanism study of C6 α-olefin adsorption on faujasite and Linde Type A zeolites

Preparation of Ultra-High-strength Alumina Microspheres Based on Fiber Reconstruction Via Multistage Low-Carbon Alcohol Elution

Metal–Organic Framework Mediated Synthesis of Small‐Sized γ‐Alumina as a Highly Active Catalyst for the Dehydration of Glycerol to Acrolein

Catalytic Properties of Fluorinated Alumina for the Production of Dimethyl Ether

Adsorption variations on Ni (111) surface: electron density diversity from oxygen-containing functional groups

Modified Inverse Micelle Synthesis for Mesoporous Alumina with a High D4 Siloxane Adsorption Capacity

Probing the Roles of Residual Sodium in Physicochemical Properties and Performance of FeAlNa Catalyst for Fischer–Tropsch Synthesis

Ethanol Dehydration to Ethylene over High-Energy Facets Exposed Gamma Alumina

Long-chain Α-Olefins Production over Co-MnOx Catalyst with Optimized Interface

High Alcohols Synthesis via Fischer–Tropsch Reaction at Cobalt Metal/Carbide Interface