Abstract:Background With the current rapid economic growth, demands for energy are progressively increasing. Energy shortages have attracted significant attention due to the shrinking availability of non-renewable resources. Therefore, thermal energy storage is one of the solutions that lead to saving of fossil fuels and make systems more cost-effective by the storage of wasted thermal energy. In particular, the application of phase change materials (PCMs) is considered as an effective and efficient approach to thermal energy storage because of the high latent heat storage capacity at small temperature intervals. Nevertheless, leakage problems and low thermal conductivity limit the practical applications of PCMs. Therefore, form-stable phase change materials with high thermal conductivity are urgently needed. Results A novel form-stable composite phase change material was prepared by incorporating PEG into waste sawdust with 5% EG. In the composites, PEG served as a phase change material, while waste sawdust acted as a carrier matrix. EG was added to help increase the thermal conductivity of the composites. The melting temperature of CPCMs-4 with 5% EG was found to be 58.6 °C with a phase change enthalpy of 145.3 kJ/kg, while the solidifying temperature was 48.5 °C with a phase change enthalpy of 131.4 kJ/kg. The thermal conductivity of CPCMs-4 with 5% EG increased by 23.8% compared with that of CPCMs-4. Moreover, no obvious changes in melting, solidifying temperature, or latent heat after 200 heating–cooling cycles were detected. The supercooling extent of CPCMs-4 with 5% EG decreased by 19.2% compared with PEG. The volume change properties and wettability properties of CPCMs-4 with 5% EG are suitable for thermal energy in terms of practical application. Conclusions The prepared composites have excellent thermal and form-stable properties and they can be recognized as potential candidates for thermal energy storage as form-stable composite phase change materials. Using simple impregnation techniques with waste sawdust as a supporting material, this study demonstrates an innovative technology for practically and markedly enhancing the adsorption capacity of phase change materials.

Enhancing Thermal Conductivity and Storage of Peg-Based Composites Via Expanded Boron Nitride Preparation and Heat Conduction Pathways Establishment

Bidirectionally High Thermal Conductive Phase Change Materials with Arrayed Radially Oriented Boron Nitride Nanosheets for Battery Pack Thermal Management

Thermal Energy Storage Performance of Paraffin-Based Composite Phase Change Materials Filled with Hexagonal Boron Nitride Nanosheets

A Strategy for Constructing 3D Ordered Boron Nitride Aerogels-Based Thermally Conductive Phase Change Composites for Battery Thermal Management

Highly and Uniformly Thermal Conductive Phase Change Composites by Constructing the Bidirectionally Oriented and Interconnected Boron Nitride Nanosheet Network

Phase change material with anisotropically high thermal conductivity and excellent shape stability due to its robust cellulose/BNNSs skeleton

Enhanced Thermal Energy Storage of Polyethylene Glycol Composite with High Thermal Conductive Reaction-Bonded BN Aerogel

Hybrid Network Structure of Boron Nitride and Graphene Oxide in Shape-Stabilized Composite Phase Change Materials with Enhanced Thermal Conductivity and Light-to-electric Energy Conversion Capability

High Thermal Conductive Shape-Stabilized Phase Change Materials of Polyethylene Glycol/boron Nitride@chitosan Composites for Thermal Energy Storage

The establishment of Boron nitride @sodium alginate foam/ polyethyleneglycol composite phase change materials with high thermal conductivity, shape stability, and reusability

Vertically Oriented Boron Nitride/silicon Carbide Scaffold for Thermal-Conductive and Electrical-Insulating Phase Change Composites

Largely Enhanced Thermal Conductivity of Poly (ethylene Glycol)/boron Nitride Composite Phase Change Materials for Solar-Thermal-electric Energy Conversion and Storage with Very Low Content of Graphene Nanoplatelets

Enhanced thermal conductivity of waste sawdust-based composite phase change materials with expanded graphite for thermal energy storage

Enhanced thermal conductivity and thermal performance of form-stable composite phase change materials by using β-Aluminum nitride

Photodriven Shape-Stabilized Phase Change Materials with Optimized Thermal Conductivity by Tailoring the Microstructure of Hierarchically Ordered Hybrid Porous Scaffolds

Highly graphitized 3D network carbon for shape-stabilized composite PCMs with superior thermal energy harvesting

Processable and Shape-Stable Phase Change Materials with Enhanced Thermal Conductivity of UV-cured NPGDMA Aided PEG2000 and BN

Fibrous form-stable phase change materials with high thermal conductivity fabricated by interfacial polyelectrolyte complex spinning.

Enhanced Comprehensive Performance of Polyethylene Glycol Based Phase Change Material with Hybrid Graphene Nanomaterials for Thermal Energy Storage

High Thermally Conductive Shape-Stabilized Phase Change Composites with Dual-Aligned Carbon Nanofiber Scaffolds

Robust BNNS/ANF Aerogel Skeleton-Based PEG Composite Phase Change Materials with High Latent Heat for Efficient Thermal Management