Abstract:Improving battery longevity in portable devices usually requires the use of different voltage levels with a wide range of load capability for various functional blocks. Since a single-inductor-multiple-output (SIMO) converter can support multiple output voltages while using only one inductor, it is an excellent candidate to minimize the component count and thus the production cost. However, the cross-regulation and power consumption are two main issues of the previously reported SIMO converters [1-5]. Although pseudo-continuous conduction-mode (PCCM) control with a freewheel period [1] tries to augment power density and eliminate cross-regulation, associated power dissipation of freewheel switch exacerbates its overall efficiency. The charge-control technique with energy recovery presented [2] decouples the output channels between each switching cycle, at the expense of additional switching loss and slow response. The comparator-based controlled SIMO converters are investigated in [3, 4] and the cross-regulation in most channels is improved due to the fast response of the comparator. However, since the channel that is last connected to inductor is inevitably regulated by the accumulative error of all channels to balance the overall inductor current, every load transition at other outputs will introduce serious cross-regulation [3] and load-regulation problem [4] in the channel. In addition, cross-regulation and slow response also limit the application of dynamic voltage scaling (DVS) technique, which is widely used in single-output converters to improve the system power efficiency by providing variable voltage with fast reference tracking.

Restrain of Ripple Voltage in Synchronous Buck Switching Converter

Improved Small-Signal Model for Switching Converter With Ripple-Based Control

Interface Passivation for DC Converters under Voltage Droop Control

The Sliding Mode Controller Based on Reference Triangular Wave for Buck Inverter

A Voltage Ripple Compensation Method for Constant On-Time Buck Converter

A Capacitor Current and Capacitor Voltage Ripple Controlled SIDO CCM Buck Converter With Wide Load Range and Reduced Cross Regulation

A Circuit Model for Electromagnetic Suppressing Spurious Noise of Synchronous DC-DC Buck Convertor

Accurate Loop Gain Model of Ripple-Based Constant On-Time Controlled Buck Converters

An Improved Soft Switching Method Applicable to Buck Converter

Torque ripple analysis and reduction of permanent magnet synchronous motor

A Design of High-power Buck Converter Based on Synchronous Rectification

Large-signal model by means of gyrators for buck converters

Current Ripple Reduction for the Quasi-Z-Source Inverter with Modified Space-Vector PWM Strategy

A General Approach to Sampled-Data Modeling for Ripple-Based Control—Part II: Constant ON-Time and Constant OFF-Time Control

Modeling and Analysis of Four-phase Interleaved Synchronous Rectifier

Dc-Link Ripple Suppression of Cascaded H-Bridge Based MV Grid Emulator Apparatus for Analysis and Testing of Grid-Tied Converters in Distribution System

A Ripple Estimation Method for Piecewise Averaged Model of PWM Converters

Restrain of Voltage and Current Peak in Buck Converter Used for Stimulating Arc-Excited Ultrasonic

Ripple Voltage Suppression and Control Strategy for CHB-Based Solid-State Transformer

4.3 an 87%-Peak-efficiency DVS-capable Single-Inductor 4-Output DC-DC Buck Converter with Ripple-Based Adaptive Off-Time Control.

A Dual-Mode Single-Inductor Dual-Output Switching Converter With Small Ripple