Abstract:Although the extensive research has expanded on the modification of cyanate ester (CE) resins and the mechanical properties of CE composites, very few studies have been conducted on carbon fibre (CF)/modified CE winding composites and the thermomechanical properties of the composites. In this research, epoxy (EP)-modified novolac cyanate ester (NCE) and bismaleimide (BMI)-modified NCE resins were prepared. The CF/modified CE winding composites were manufactured, and their thermomechanical properties were tested. The optimal winding process was determined, and a preheating technique was implemented. Then, the EP/CE resin (10:90) and the BMI–DBA/CE resin (10:90) were selected as the resin matrix of the winding composite based on the viscosity properties, mechanical properties and thermal analysis (using thermogravimetric analysis and differential scanning calorimetry) of the modified CE resin. The selected resin exhibited good manufacturability at 70°C, good thermal stability and high Tg (above 370°C). The thermomechanical property tests indicate that the modified CE resin composite exhibits an outstanding mechanical strength at room temperature and at high temperatures (130°C, 150°C and 180°C) compared with that of the pure CE resin composite. The reasons for this enhancement can be attributed to a toughening mechanism and the effect of sizing agents on the CFs.

Research Progress of Modification for Cyanate Ester Resin

Research progress of cyanate ester resin modified by toughener

Recent Developments in the Toughening of Cyanate-ester Polymers

Research Progress in Toughening Modification of Cyanate Ester Resin by Epoxy Resin

Research Progress on the Modification of Cyanate Ester

Research Progress on Modification of Epoxy Resin

THE TOUGHENING MODIFICATION OF CYANATE ESTERS RESIN MODIFIED BY EPOXY TERMINATED BUTADIENE-ACRYLONITRILE

High Performance Toughened Cyanate Ester Resin with Low Injection Temperature for RTM Process

Study on Modification and Application of Cyanate Ester Resin

Influence of Cyanate Ester Modifier on the Thermal, Mechanical, and Corrosive Properties of Epoxy Composite Coating

Mechanical properties of cyanate ester composites modified by ESi

Modification of CE and Preparation of Flexible Film

Carbon-fibre-reinforced Modified Cyanate Ester Winding Composites and Their Thermomechanical Properties

STUDY ON MODIFIED CYANATE ESTER RESIN SYSTEM FOR RTM

Study on Toughness and Dielectric Property of Modified Cyanate Ester Resin

Research progress of bismaleimide/cyanate resins

Improved Cyanate Resin with Low Dielectric Constant and High Toughness Prepared Using Inorganic–Organic Hybrid Porous Silica

CYANATE ESTERS MODIFIED BY CARBOXYL-TERMINATED LIQUID BUTADIENE-ACRYLONITRILE

Study on Cyanate Resin Modified by Prepolymer of Bismaleimide

Properties of epoxy terminated butadiene-acrylonitrile rubber modified cynate esters resin

Investigation on Mechanical Properties and Thermal Expansibility of Epoxy Resin Copolymerization Modified Cyanate Ester under Medium‐low Temperature Curing Process