Abstract:The steady and unsteady flow properties of the National Aeronautics and Space Administration (NASA) single-stage transonic compressor stage 35 are numerically investigated through the Reynolds-averaged Navier–Stokes (RANS) simulation method. The main purpose of the present paper is twofold. One is to validate the capability of the Spalart–Allmaras (S–A)-Helicity-γ model in unsteady RANS (URANS) simulation for rotor–stator interaction of a whole-stage compressor, and another is to figure out the roles played by helicity modification and transition augmentation in improving the performance of traditional S–A model. The results of steady RANS simulation indicate that the S–A model with helicity regulation is more sensitive to vortex structures in the end wall and blade-tip regions, while the inclusion of transitional intermittency factor can help predict the important transition phenomenon in the midspan region. As the back pressure increases, the inaccuracy of flow fields exchange caused by the mixing plane method becomes nonnegligible for the prediction of aerodynamic performance and thermodynamic quantities. Thus, URANS simulation seems to be necessary for more accurate prediction of the flow details of the stator subjected to periodic sweep of the rotor wake. On the suction surface of the stator, a turbulent separation bubble near the leading edge is transported downstream and merges into another separation bubble with much lower turbulence intensity at the trailing edge periodically. The combination of helicity and transition modifications provides advantages over traditional S–A model in describing this process, quite similar to its performance in steady simulations.

Numerical Simulation for Unsteady Flow Field of Counter-Rotating Axial Fan

Numerical simulation of internal flow in forward-curved centrifugal fan

Numerical Simulation for Steady Flow Field of Counter-Rotating Axial Fan

Three-dimensional Numerical Simulation of the Internal Flow in the Centrifugal Fan

Flow Computations of Multi-Stages by URANS and Flux Balanced Mixing Models

Optimization Design of Centrifugal Fan Impeller Based on Numerical Simulation.

3-D viscous numerical investigation on flow field of a transonic axial-flow fan rotor

Numerial Simulation of Flow Field in the Multi-Blade Centrifugal Fan of Range Hoods

Summary of Numerical Simulation of the Internal Flow in the Turbomachinery

Numerical Simulation for Bent-Swept Blade in Designing Civilian Fan

Experimental and numerical simulation investigation of a counter-rotating fan stage

3d Numerical Simulation Of Centrifugal Fan Inside Flow Field And Modification Investigation

A Numerical Simulation of Meridian Passage Turbulent Flow in Centrifugal Fans

Computation of Unsteady Flow Fields in a Pump Using Sliding Mesh Method

Numerical Simulation on the Inviscid Flowfield of Transonic Hovering Rotor Using Implicit Method and WENO Schemes

Numerical simulation of unsteady incompressible flow field

TIME-ACCURAfE SIMULATION OF A TRANSONIC FIN STAGE ON ROTOR/STATOR INTERACTION

Several Key Points for Improving Performance Numerical Prediction of Low-pressure Axial Flow Compressor

NUMERICAL SIMULATION OF THE AERODYNAMIC PERFORMANCE OF A SINGLE-STAGE TURBINE AT OFF-DESIGN WORKING CONDITIONS

Numerical simulation of unsteady single-stage transonic axial compressor flow

Prediction Of Flow Features In Rotating Cavities With Axial Throughflow By Rans And Les