Abstract:The prevalence of concrete-filled steel tubular (CFST) catenary arches, renowned for the optimal load-bearing efficiency, has shown a marked increase over the past decades. To date, extensive research has been conducted into the nonlinear buckling behaviors and elastic-plastic strength of circular and parabolic CFST arches, grounded on the assumption that the curvature of the arch axis remains a specific constant. However, for CFST catenary arches, this assumption is not appropriate, given the substantial variation in curvature along the arch rib, and the influence of the arch axis is not adequately addressed in the existing design codes. Therefore, in this paper, a more precise strain expression is employed to conduct the nonlinear buckling analysis on CFST catenary arches. The analytic solutions for both symmetric snap-through buckling and anti-symmetric bifurcation buckling loads are obtained. In addition, a validated finite element (FE) model is adopted to investigate the influence of key parameters, including the slenderness ratio , the arch-axis coefficient, the rise-to-span ratio, and the steel ratio, on the in-plane stability bearing capacity of CFST catenary arches subjected to axial compression. Moreover, the obtained numerical results are utilized for comparison with the prediction results calculated by the existing design codes for CFST or steel arches. The comparison results indicate that the existing design codes have tended to overestimate the in-plane strength of CFST catenary arches, mainly due to the ignorance of the influence of pre-buckling deformation. Thus, based on the nonlinear buckling analysis results, a revised lower-bound design formula for predicting the in-plane stability bearing capacity of CFST catenary arches under axial compression is proposed, considering the influence of the rise-to-span ratio and the steel ratio.

Dynamic Buckling Analysis of Laminated Composite Clamped Shallow Arches

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Elastic Lateral–torsional Buckling of Circular Arches Subjected to a Central Concentrated Load

In-Plane Nonlinear Buckling Analysis of Deep Circular Arches Incorporating Transverse Stresses

In-plane buckling analysis of the horsizontal spring circular arch under concentrated load at the mid-span

IN-PLANE ELASTIC BUCKLING OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORT

In-plane Nonlinear Buckling Analysis of Circular Arches Considering Shear Deformation

Stability Analysis ofLong-span Crossed-arch Latticed Structure

Elastic-plastic Stability of Shear-Deformable Circular Arches

IN-PLANE NONLINEAR ANALYSIS AND BUCKLING OF SHEAR-DEFORMABLE CIRCULAR ARCHES

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

STUDY FOR IN-PLANE ULTIMATE STRENGTH OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORTS

Buckling of Mono-symmetric I-section Circular Arches

On Buckling of Non-Uniform Shallow Arch under a Central Concentrated Load

Elastic and Inelastic Stability of a Steel Arch Subjected to a Crown Point Load under an Elevated Fire Environment

Collapse Behavior of Non-Uniform Shallow Arch under a Concentrated Load for Fixed and Pinned Boundary Conditions

Static and Dynamic Symmetric Snap-Through of Non-Uniform Shallow Arch under a Pair of End Moments Considering Critical Slowing-Down Effect

FINITE ELEMENT ANALYSIS ON BUCKLING OF ARCH BY THE DEGENERATED 3-D CURVED BEAM ELEMENTS

In-plane instability of shallow layered arches with interlayer slip

In-plane buckling analysis of gabled arch frame steel building

In-plane nonlinear buckling analysis and design method of concrete-filled steel tubular catenary arches