Abstract:Nine carbon blacks with iodine surface areas ranging between 60 and 1222 m2/gm and with dibutyl phthalate absorption numbers ranging between 125 and 420 cm3/100 gm have been evaluated as lithium/oxyhalide cell cathode materials. Two criteria have been considered: their ability to serve as heterogeneous catalysts for the cathodic half‐cell reaction (a function of both internal surface area and specific activity), and their ability to accommodate the continuous deposition of solid discharge products with minimal internal resistance losses (a function of both the porosity and pore size distribution of the agglomerated carbon particle aggregates). For carbons with surface areas of at least 250 m2/gm, overvoltages for SOCl2 reduction are practically independent of carbon black surface area. Furthermore, cathode porosities and Li/SOCl2 cell discharge capacities both correlate with the DBP absorptometer numbers characteristic of the high surface area carbon blacks themselves. If the activity of a low surface area carbon is augmented via a catalytic additive (e.g., supported platinum), overvoltages similar to those obtained with high surface area carbons and complete utilization of the cathode's internal pore volume are achieved. The use of cathode “pore formers” may also lead to improved performance characteristics, particularly at very high current densities where pore former particle diameters averaging about 200 μm yield optimal performance results. Of the commercially available carbon blacks examined, Ketjenblack EC and Black Pearls 2000 function best as Li/SOCl2 cell cathode materials, greatly outperforming the standard carbon, Shawinigan acetylene black.

Effect of Carbon Black on the Performance of Gas Diffusion Electrode of Lithium-Air Battery

Study on Carbon Nanoparticles for Anode Materials of Lithium-Ion Battery

Unraveling the Effect of Conductive Additives on Li-Ion Diffusion Using Electrochemical Impedance Spectroscopy: A Case Study of Graphene vs. Carbon Black

Enhancing High-Rate Charge–Discharge Performance of Lithium–Sulfur Batteries Using Carbon Black Interlayer

The Electrochemical Performance of Super P Carbon Black in Reversible Li/Na Ion Uptake

Dimension Effect of Conducting Carbon Additives on the Electrochemical Properties of Li4Ti5O12/C Anode in Lithium-Ion Battery

Effects of the carbon black properties in gas diffusion layer on the performance of proton exchange membrane fuel cells

Carbon Electrode Materials for Lithium-Ion Batteries

Relationships Between Carbon Black Cathode Material Characteristics and Lithium/Oxyhalide Cell Performance

Effects of the Diffusion Layer Characteristics on the Performance of Polymer Electrolyte Fuel Cell Electrodes

Effect of Carbon Nanotubes on the Anode Performance of Natural Graphite for Lithium Ion Batteries

Acetylene black agglomeration in activated carbon based electrochemical double layer capacitor electrodes

An Acetylene Black Modified Gel Polymer Electrolyte for High-Performance Lithium–sulfur Batteries

A Comparative Investigation on Multiwalled Carbon Nanotubes and Carbon Black As Conducting Additive in Lini0.7co0.3o2

Electrical Performance Improvement of Lead-Acid Battery under the Impact of Micro Carbon Additives

Study on modification methods to improve Li-Ion storage capacity of carbon black

Effect of metal-sulfide additives on electrochemical properties of nano-sized Fe2O3-loaded carbon for Fe/air battery anodes

Effects of Electrospun Carbon Nanofibers’ Interlayers on High-Performance Lithium–Sulfur Batteries

Preparation of high-capacity air electrode for lithium-air batteries

Electrochemical Investigation of Carbon Nanotubes as Additives in Positive Electrodes of Ni∕MH Batteries

Diffusional Features of a Lithium-Sulfur Battery Exploiting Highly Microporous Activated Carbon