Abstract:Ice storms can result in accumulation of ice on structures, including overhead power transmission and distribution lines and associated poles and towers; this ice may reach thicknesses of many tens of millimeters. Icing can cause catastrophic damage which disrupts power transmission and is expensive to repair.Normal operation of a power transmission or distribution line entails Joule heating of the conductor as current flows through it. Lines are normally designed to have a constant, low resistance, so as to avoid excessive power losses and avoid excessive operating temperatures. Because the normal heating is low (by design), it is of limited value in preventing or recovering from an icing event. This paper describes power conductors that can switch their electrical resistance from a very low value, to transmit electric energy, to a much higher value, for de-icing. The switching in between two conductor resistances does not disturb the main conductor function, which is to provide a customer with uninterrupted electric power.A variable-resistance conductor (VRC) is built of N strands (or groups of strands) insulated from each other, where N is any odd integer greater than one. For instance, N=3, 5 or 7, etc. In normal energy-transmission operations all the conductor strands (or strand groups) are connected in parallel, whereas in de-icing mode they all are connected in series. Switching from parallel to series connection increases the line resistance by a large factor of N2, making the resistance sufficiently high for heating the line above the ice melting point. One important advantage of the method is that it uses low-voltage and, thus, low-cost switches.The design of a VRC de-icing system is described, including considerations for switches, conductors, control and deployment strategy. We also describe safety devices to return the line to normal operation if the electronics get damaged. Laboratory and full-scale prototypes have both successfully demonstrated the capability of VRC de-icing.

Study on DC De-icing Method Based on Uncontrollable 12-Pulse Rectification for Transmission Line

De-Icing Strategies in Different Stages for Transmission Lines

A Review of Icing and Anti-Icing Technology for Transmission Lines

Research and Pilot Project of DC Deicer-SVC System for 500 Kv Transmission Lines

Research on the Operating Process of DC De-icer and Its De-icing Efficiency in China Southern Power Grid

Design of an adaptive on-load de-icing scheme for overhead power transmission line

Static Var Compensator Reconstruction Scheme of 500 kV Fixed DC De-icing Device

Control and Analysis of the Modular Multilevel DC De-Icer with STATCOM Functionality

The anti‐icing and deicing robot system for electricity transmission line based on external excitation resonant

Research on load transfer melt-icing technology of transmission lines: Its critical melt-icing thickness and experimental validation

A Review on Superhydrophobic Surface with Anti-Icing Properties in Overhead Transmission Lines

Analyzing a novel controllable rectifier type SVC and de-icing device's impact on the transient stability of power system

Variable-resistance conductors (VRC) for power-line de-icing

Recent progress on ultrasonic de-icing technique used for wind power generation, high-voltage transmission line and aircraft

Control and Protection Strategies of Parallel De-icing Operating Mode for UHVDC Power Transmission System

Application and research of laser de-icing in power system

Multi-Objective Transmission Line De-Icing Outage Optimal Scheduling Framework

Analysis of Ice-melting Process for Aerial Conductor

Modeling and Analysis of Progressive Ice Shedding along a Transmission Line During Thermal De-Icing

An Anti-icing Method With Switch-off Effect for Glazed Ice on Insulators

Research on Electrocaloric Effect and Ice-Water Switching Principle Based Anti-Icing Coating for Insulators of Overhead Transmission Lines and Its Performance