Abstract:The tribological behavior of Mo-sprayed piston r ing sliding against grey cast iron cylinder liner under the lubrication of a ful ly formulated petroleum based engine oil SJ/5W-30 containing molybdenum dithioc arbomate (MoDTC) or molybdenum dithiophosphate (MoDTP) was investigated with an Optimol-SRV test rig. The testing temperatures were controlled at 125 ℃ and 32 0 ℃ to simulate the real engine operating conditions.The worn surfaces of the p iston ring and cylinder liner were observed and analyzed by means of scanning el ectron microscopy (SEM) and X-ray photoelectron spectroscopy(XPS). It was obser ved that the frictional behavior of both MoDTC and MoDTP depends heavily on the experimental temperature; MoDTC is effective in decreasing the friction coeffici ent and wear rate at a relatively extended test duration while MoDTP shows frict ion-reduction ability only at relatively high temperatures. It can be seen from the SEM observations of the worn piston ring and cylinder liner surfaces that t he set test temperature range has also strong impact on both the wear severity a nd the wear mechanisms in the contact surface. When it rises from 125 ℃ to 320 ℃, the wear becomes more serious, and the wear mechanism changes from abrasion to adhension. In addition, the chemical interaction between the lubricant conta ining organo-molybdenum and the tribocontact surfaces plays a crucial role in f riction reducing or antiwear film formation, which is dependent on the tribochem ical characteristics of the active ferrous materials and the applied friction mo difiers such as MoDTC or MoDTP. XPS analysis of the worn cylinder liner surfaces indicates that the resultant tribochemical films are mainly composed of iron ox ides, molybdenum oxide, iron sulfide, molybdenum disulfide, and zinc and iron ph osphates. The proportion of these species is a function of both the specific fri ction modifiers used and the experimental temperature. It is supposed that the b etter friction-reduction and wear-resistant actions of MoDTC at 125 ℃ is attr ibuted to the higher content of MoS2 and other wear-resistant compounds gener ated on the worn cylinder liner surfaces.

Effect of Running-in Pretreatment on Tribological Properties of Organo-molybdenum Additives in Diesel Oil

Effect of Frictional Pair Materials on Tribological Behavior of Molybdenum Dithiocarbomate As an Additive

Tribological Properties of Compound Additives of Magnesium Silicate Hydroxide Superfine Powder and MoDTC in Lubricating Oil Additives

Experimental Study on Dissolution Stability and Dispersion and their Influence on Tribological Properties for Reducing Friction and Prolonging Life of Armored Vehicle Engine Lubricating Oil Additives

Effects of Antiwear Additive on Tribological Properties of Lubricant Oils for Different Periods

Tribological Behaviour of Three S-Containing Triazine Derivatives and Their Synergetic Effect with Zinc Dialkyldithiophosphate As Additives

Anti‐wear Performance of Organomolybdenum Compounds As Lubricant Additives

Effect of Nano-Montmorillonite Additive on Tribological Properties of 45 Steel Tribo-pair

The Tribological Behaviours of Dithiocarbamate‐triazine Derivatives As Additives in Mineral Oil

Dispersion Stability and Tribological Properties of Additives Introduced by Ultrasonic and Microwave Assisted Ball Milling in Oil

Tribological Behaviour of Two Ash-Less and Phosphorous-Free Anti-Wear Additives and Their Synergetic Effect with Zinc Dialkyldithiophosphates in Mineral Oil

The Synergistic Antiwear and Frictional Properties of Organic Molybdenum Compound with Zinc Dialkyldithiophosphate

Effect of MoDTC and MoDTP on Tribological Behavior of Cylinder Liner/Piston Ring

Molecular Dynamics Simulation and Experimental Study of Tribological Behavior of Dimethyl Carbonate-Diesel Blends in Synthetic Base Oil

Tribological Performances and Mechanism of Bismuth Dialkyl-Dithiocarbamate Additive

Preparation and Tribological Behavior Study of Sulfur and Phosphorus Free Organic Molybdenum Additives

Effect of Addition of Montmorillonite and Indium Composite Powder on Tribological Properties of 45 Steel Friction Pairs

Experimental Investigate of the Wear and Friction Performance Considering Effects of Surface Topography and Lubricant

Impacts of Tribochemical Interaction on Lubricating Durability of Engine Oil

Study on Tribological Behavior of Ammonium Molybdate Lubricant Additive

Tribological Behavior of Some Long-Chain Dimercaptothiadiazole Derivatives as Multifunctional Lubricant Additives in Vegetable Oil and Investigation of their Tribochemistry Using XANES