Vibration suppression of aeroengine casing during milling
Liang Guo,Fan Yang,Tian Li,Ming Zhou,Junlei Tang
DOI: https://doi.org/10.1007/s00170-020-06582-2
IF: 3.563
2021-01-23
The International Journal of Advanced Manufacturing Technology
Abstract:The casing is a basal body part for assembling other parts in an aeroengine, but its weak rigidity seriously affects machining accuracy and production efficiency. Therefore, it is very important to improve this rigidity of the part during processing. An aeroengine combustor casing is used to study the vibration law and suppression method of a casing milling process through a combination of simulations and physical experiments in this paper. First, the milling vibration law of a Rolls-Royce aeroengine combustor casing is analysed through mechanical analysis and machining vibration detection, and then a simulation experiment environment based on physical experiment verification is established. Second, based on a virtual experimental platform, the free mode and constraint mode of the casing without auxiliary support, multipoint rigid auxiliary support, and flexible surface auxiliary support schemes are analysed. Subsequently, to determine the optimal support pressure for different types of casing parts produced on-site, after analysing the common size range of the casing, 3<sup>4</sup> and 4<sup>3</sup> full-factor simulation experiments are performed, and the influence of each factor on the change in vibration is summarised. Finally, a static load experiment is used to verify that the clamping scheme of the flexible surface auxiliary support can improve the radial rigidity of the casing. Through the experimental research in this paper, the results show that the error between the simulation experiment results and the physical experiment is basically kept within 20%, and the established virtual experiment is reliable. At the same time, based on the simulation data in this paper, the function expressions of vibration deformation and support pressure, milling force, case thickness, and casing diameter are fitted, and the <i>R</i>-square reaches 91.2%. This empirical formula provides theoretical support for the selection of optimal support air pressure and the prediction of vibration and deformation.