Abstract:Fiber reinforced ceramic matrix composites (CMCs) are widely investigated in recent years in order to obtain their damage mechanisms, failure modes and mechanical properties. A well-accepted fact is that the interface between the fibers and the ceramic matrix has great effects on the mechanical behavior of CMCs. The tough and nonlinear stress-strain behavior of CMCs can mainly be attributed to matrix cracking and interface debonding. Therefore, how these two factors affect the stress-strain relationship and the final strength of CMCs needs to be deeply studied. In this paper, the damage evolution and the tensile stress-strain behavior of 2D-C/SiC composite were investigated under monotonic and stepwise incremental loadings and unloadings. The strain is measured by 25 mm extensometer. The experimental results show that the stress-strain behavior of the material is obviously nonlinear; the unloading modulus decreases while the inelastic strain increases with increasing of the unloading stress; the relational curves of residual strain and unloading modulus versus the applied stress have analogous form with the tensile stress-strain curve; the fracture of the composite is quasi-brittle, i.e. catastrophic. Based on the shear-lag theory and the rule of mixture, a concise constitutive equation and a tensile strength calculation model of the damaged material were established. The simulated stress-strain curve is in good agreement with the experimental data when the applied stress is lower than 100 MPa. The difference between the theoretical curve and the experimental data when the applied stress is higher than 100 MPa mainly comes from the local strain concentrations within the seriously damaged zone, because large crack openings usually appear in this region from the experimental view. The analysis results reveal that the residual strain mainly depends on the crack opening displacement and the crack spacing, while the unloading modulus is significantly dependent on the interface debonding rate. Moreover, the uniaxial tensile behavior of 2D-C/SiC composite is mostly dominated by the longitudinal fiber bundles; the contributions of transverse fibers to the material's modulus and strength are obviously small. In the strength model, the failure criteria proposed by Tsai-Hill was applied to obtain the off-axes strength, and then the curved fiber bundle in the real material structure was equivalent to the straight. Furthermore, the rule of mixture was modified and the expression for strength calculation was presented. And, the predicted tension strength ranges from 210.5 MPa to 265.6 MPa for the 2D-C/SiC composite with 0.15 μm thick carbon interphase, which is also in good agreement with the experimental data.

Effects of Interface Properties on Tensile Strength of Ceramic Matrix Composites

Effects of Tensile Interface Strength on Fracture Behavior of PM Materials with Inclusions

Effect of interface damage on tensile behavior of fiber-reinforced ceramic-matrix composites after thermal fatigue loading

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

The Influence of the Interface on the Micromechanical Behavior of Unidirectional Fiber-Reinforced Ceramic Matrix Composites: An Analysis Based on the Periodic Symmetric Boundary Conditions

INTERFACE DAMAGE ANALYSIS OF FIBER-REINFORCED COMPOSITES WITH DUCTILE MATRIX

Finite Element Research on the Effect of Interfacial Bond Strength on Fracturing Process of Ceramic Matrix Composites

Effect of Interphase Layer on Matrix Cracking in Fiber Reinforced Ceramic Matrix Composites

Different Effects of Interfacial Properties on the Tensile and Compressive Damage Mechanisms of 3D Woven Composites: Multiscale Damage Model and Numerical Comparative Study

Influence of Interface Characteristic on Failure Process and Mechanical Properties of Brittle Composite Matrix with Particle Reinforcement

The effect of interface properties on the mechanical behavior of 3D braided composites under unidirectional tensile loading

Effect of Stochastic Loading on Tensile Damage and Fracture of Fiber-Reinforced Ceramic-Matrix Composites

The effect of interface properties on the mechanical behaviour of 3D braided composites under unidirectional tensile loading

Finite Element Analysis of Interfacial Debonding Damage in Fiber-Reinforced Ceramic Matrix Composites

The Effects of Thermal Residual Stresses and Interfacial Properties on the Transverse Behaviors of Fiber Composites with Different Microstructures

Uniaxial tensile stress-strain behavior and strength of plain woven C/SiC composite

Tailoring the toughening effects in two-dimensional nanomaterial-reinforced ceramic matrix composites

Finite Element Research on Interface of Composites During Fracturing

Damage Failure Mechanism of Unidirectional Fiber Reinforced SiCf/SiC Composites under Uniaxial Tension

Investigation on the Effect of Interface Properties on Compressive Failure Behavior of 3D Woven Composites Through Micromechanics-Based Multiscale Damage Model

Effect of Interfacial Properties on the Uniaxial Tensile Behavior of Three-Dimensional Braided Composites