Singularity Detection Through the Hermitian Wavelet and Rotating Mechanical Fault Diagnosis

Yong Zhang

2006-01-01

Abstract:This paper deals with the wavelet transform and the relation between the modulus maxima and the singularity detection,and based on the excellent property of the Hermitian wavelet,poses the conception that applies it in the rotating mechanical fault diagnosis.Besides,proves its superiority through emulational analysis.

What problem does this paper attempt to address?

Singularity Detection and Feature Extraction Based on Analytic Wavelet Transform

PANG Mao,ZHOU Xiao-jun,HU Hong-wei,MENG Qing-hua

DOI: https://doi.org/10.3785/j.issn.1008-973x.2006.11.033

2006-01-01

Abstract:A singularity detection and denoising method based on analytic wavelet transform(AWT) and signal reconstruction was proposed to improve the accuracy of signal singularity detection and the efficiency of fault diagnosis.According to the difference of propagation characteristics of wavelet transform modulus maximum(WTMM) of signal and noise along the scale direction,signal denoising and fault feature extraction were realized.Singularity detection and denoising based on AWT was applied to the vibration signals of running machines.Signals sampled under several conditions in a main reducer performance test bed were analyzed,and the fault diagnosis of the main reducer was conducted by analytic WTMM and real WTMM respectively.Experimental results show that the singularity detection using the modulus maximum of an analytic wavelet is better than that of a real wavelet,and that the fault feature can be distinguished more obviously and accurately.
Harmonic Wavelet Package Method Used to Extract Fault Signal of a Rotation Machinery

张文斌,周晓军,林勇,李俊生,沈路

DOI: https://doi.org/10.3969/j.issn.1000-3835.2009.03.020

2009-01-01

Abstract:Singular non-stable signal will occur when a rotating machinery has some faults.Hence,it is important to detect singularities of signals for condition monitoring and fault pre-diagnosis of a machinery.Based on partial decomposition in frequency domain,harmonic wavelet package method was used to analyze the simulated signal and diagnosis the practical rub faults of a rotor,it revealed the ability of harmonic wavelet analysis in arbitrary detail of frequency area.It was shown that harmonic wavelet package method has many advantages over other wavelets.The satisfied results were verified by tests.This provided a new method for fault signal analysis of a rotating machinery.
Singularity recognization of vibration signal based on Hermitian wavelet for diagnosis

Yanyang Zi,Qingxiang Li,Zhengjia He

DOI: https://doi.org/10.1117/12.521526

2003-01-01

Abstract:The vibration signal in the nature of singularity is always caused by mechanical fault of equipment. It is important to recognize the signal singularity correctly for mechanical fault diagnosis. The complex Hermitian wavelet is constructed by means of the first and the second derivatives of the Gaussian function to detect signal singularities. The Hermitian wavelet has a real Fourier transform that will not mix the signal phase with its filter phase, and its real part and imaginary part have less oscillation than Morlet wavelet, so that the convolution operation can be process with fewer number of data points and the signal singularity will not be smeared. The time-scale amplitude plot and phase plot based on Hermitian wavelet are presented to detect signal singularities. A successful application has been obtained in diagnosis of large air compressor gearbox. According to the singularities extracted from amplitude plot and phase plot of gearbox vibration signals, it is obvious that there existed impact rub fault that caused intense vibration in the gearbox. After justified maintenance the compressor gearbox runs smoothly in a good condition.
Singularity Detection Using AWT with Application to Fault Diagnosis

Pang Mao,Yang Chen-long,Zhou Xiao-jun

DOI: https://doi.org/10.1109/cisp.2008.416

2008-01-01

Abstract:Singularity analysis of vibration signal is an effective method for mechanical fault diagnosis. Signal singularities can be characterized by its wavelet transforms modulus. Real wavelets are generally adopted in analysis. In fact, analytic wavelet transform (AWT) only reflects positive frequencies of signal and its modulus oscillation is weaker than real wavelet transform (RWT), so signal singularities can be detected more accurately. Singularities detection and de-noise based AWT are applied to vibration signals of running machines. Signals are analyzed by this method sampled under several conditions in a main reducer performance test bed developed by us. Experiment results show that singularity detection using the modulus maximum of an analytic wavelet is better than that of a real wavelet. The fault feature can be distinguished from the reconstructing signals more easily, which makes for fault features extraction.
Signal Singularity Detection Based on the Hermitian Wavelet for Fault Diagnosis

Jian Chen,Wen Li,Qingdong Li,Peng Li,Chengbin Lian,Zhang Ren

DOI: https://doi.org/10.1109/ccbd.2014.33

2014-01-01

Abstract:On Big Data analysis for fault diagnosis, health monitoring & fault tolerance of rockets and spacecrafts in aerospace industry, as the local anomaly induced signals tend to have singularity, this paper presents a guideline to employ the time-scale amplitude and phase diagrams based on the Hermitian wavelet transform to identify signal singularities. Firstly, the principle of signal singularity detection based on wavelet transform is formulated. Secondly, the definitions, characteristics, and expressions of the Hermitian wavelet transform is studied. Finally, simulations are carried out to verify the proposed algorithms.
Wavelet Fault Detection Based on Filtering Pretreatment

Guangzhou Zhao

2007-01-01

Abstract:Noise degrades most existing fault detection methods based on singularity analysis.A method based on wavelet module maxima of the pretreated electric signal is proposed.As wavelet module maxima occur at peaks of signal,the pretreatment removes power frequency periodic components from electric signal and thus avoids misjudgments of fault.Wavelet transform decomposes fault component and noise into different scale spaces,which guarantees the abstraction of fault signature and the de-noising performance.The simplified Mallat singularity detection method not only reduces the computational complexity,but also keeps the localization accuracy.Simulations show that the fault detection method is precise for fault locating and insensible to noise.The method can also be applied to other periodic signal analysis.
Study on application of wavelet transform technique to fault diagnosis of rotary machine

WANG Kan-wei,FANG Zong-de,QIAN Xue-xiang

DOI: https://doi.org/10.3778/j.issn.1002-8331.2008.08.061

2008-01-01

Abstract:The fault feature extraction based on wavelet transform technique is studied in depth,which is applied to fault diagnosis of rotary machine.A new fault feature extraction method based on singularity detection and the modular maximum using continuous wavelet transform analysis is put forward.Research on combining the resolution method and singularity theory can find that wavelet transform is very propitious to depict the whole and local signal.Utilizing the characteristics of wavelet transform resolving and constructing the signal,the information about frequency band pointedly can be chosen and the noise interference can be reduced.At the same time,the typical characteristics of crack faults can be effectively extracted through frequency spectrum analysis of constructing signals.The results show that it is effective to diagnose the non-steady of rotor by wavelet transform.
Application of Wavelet Transform in Fault Diagnosis to Indicate the Singularity of Signal

Kai Huang

2005-01-01

Abstract:In industrial automatically controlled system, fault signal is often paroxysmal. Wavelet transform is a new time and frequency domain analysis method, by using it , we can easily figure out the singularity of indeterminacy, at the same time fault information will acquired. It is approved that wavelet transform is superiority in fault diagnosis.
Singularity analysis of the vibration signals by means of wavelet modulus maximal method

Z.K. Peng,F.L. Chu,Peter W. Tse

DOI: https://doi.org/10.1016/j.ymssp.2005.12.005

IF: 8.4

2007-01-01

Mechanical Systems and Signal Processing

Abstract:Machine fault diagnosis is vital for safe services and non-interrupted production. The key issue in fault diagnosis is the pattern recognition. A set of valid features will simplify the classifying operations and enhance the accuracy in diagnosis. In this paper, a novel singularity based fault features is presented. Vibration signals collected under different machine health conditions will show different patterns of singularities that can be measured quantitatively by the Lipschitz exponents. The wavelet transforms modulus maximal (WTMM) method provides a simple but accurate method in calculating the Lipschitz exponents. Therefore, the WTMM based Lipschitz exponent calculation as well as the method to select the appropriate wavelet function for WTMM and its range of scale are introduced. Three parameters about the singularity analysis are recommended. They are the number of Lipschitz exponents per rotation N¯, the mean value μα and the relative standard deviation s¯α of the Lipschitz exponents that are obtained from the extracted features. To verify the usefulness of the proposed methods, simulated signals and vibration signals generated by four types of faults commonly occurred in a rotating machine, including the imbalance, the oil whirl, the coupling misalignment and the rub-impact, had been used for testing purpose. The results show that the signal from the rub-impact possesses the highest singular value and the widest range of singularity. The signal of the coupling misalignment ranked the second. Whilst, the signal of imbalance is more regular or having the smallest singular value and the narrowest range of singularity. The results also prove that the three parameters are excellent fault features for pattern recognition as they can well separate the four fault patterns.
The application of wavelet singularity detection in fault diagnosis of high voltage breakers

Xiaoguang Hu,Yanchao Ji,Wenbin Yu

DOI: https://doi.org/10.1109/IECON.2001.976531

2001-01-01

Abstract:The occurrence of mechanical failures of high voltage breakers not only can cause time shift of vibration impulse events, but also can bring the change of some wave crest shapes in time domain. In this paper, a novel technique is proposed to improve the accuracy of breakers' fault diagnosis. Using Hilbert transform to pick up the envelops of vibration signals, and then disposing those envelops with multi-scale wavelet transform, the singularity exponents of those envelops are calculated by the signal singularity detection theory based on wavelet transform, and which are used as feature parameters of fault diagnosis. Though analyzing the vibration signals of high voltage breakers switching on and comparing the singularity exponents when they are in good condition and in fault condition, the conclusion could be deducted that preferable effect can be acquired if the singularity exponents are used in mechanical fault diagnosis of breakers
Hybrid Wavelet Analysis of Vibration Signal Singularity for Condition Monitoring and Fault Prognosis

Zhengjia He,Hongkai Jiang,Yanyang Zi

2005-01-01

Abstract:In this paper, a new approach of hybrid wavelet analysis is proposed, in which the advantages of complex Hermitian wavelet (CHW) and redundant second generation wavelet (RSGW) are synthesized. CHW transform is suitable for detecting signal singularities caused by mechanical fault. RSGW transform can yield enough information from signal decomposition that data number of approximation signal or detail signal at all levels remains the same as the original data number. These excellent performances can be integrated for mechanical condition monitoring and fault prognosis. A successful application for mechanical impact fault in large air compressor gearbox has been achieved.
THE FAULT DIAGNOSIS OF HIGH VOLTAGE BREAKERS BASED ON WAVELET SINGULARITY DETECTION

HU Xiao-guang,DAI Jing-Min,JI Yan-chao,YU Wen-Bin

DOI: https://doi.org/10.3321/j.issn:0258-8013.2001.05.014

2001-01-01

Abstract:The occurrence of mechanical failure of high voltage breakers not only can cause time shift of vibration impulse events, but also can bring the change of some wave crest shape in time domain. Using the signal singularity detection theory based on wavelet transform, the singularity exponents of vibration signal envelopes can be obtained, and which are used as feature parameters of fault diagnosis. In this paper, though analyzing the vibration signals of high voltage breakers switching on and comparing the singularity exponents when they are in good condition and in fault condition, the conclusion of that preferable effect can be acquired if the singularity exponents are used in mechanical failure diagnosis of breaker could be deducted.
The Study of Machinery Vibration Fault Diagnosis Detection System Based on Wavelet Transformation

ZHOU Yang,XIAO Yun-shi,HE Bin,YUE Ji-guang

DOI: https://doi.org/10.3969/j.issn.1005-0523.2006.04.030

2006-01-01

Abstract:In this paper,the basic theories of wavelet are introduced.The principle of using wavelet to detect the singularity of the machinery vibration signal and diagnose machinery fault is expounded.The machinery fault and location of singular signal can be detected according to the maximum of the wavelet transformation of the vibration signal.The hardware design diagram and software flow chart are given.Experimentation results indicate that the singularity of the fault machinery vibration signal can be detected and the machinery fault can be discovered by the system.
A New Method for Fault Diagnosis of Rotating Machinery Based on Harmonic Wavelet Filtering

Wenbin Zhang,Qun Cai,Lu Shen,Hongjun Wang,Junsheng Li

DOI: https://doi.org/10.1109/cisp.2009.5301181

2009-01-01

Abstract:Considering the fault characteristic of rotating machinery, a novel approach was proposed by using harmonic wavelet filtering. Based on the fine refinement function of harmonic wavelet, the characteristic frequency components and other components were decomposed to independent frequency bands, without any overlapping or leaking. Then the characteristic frequency component would be extracted by the recomposed of data. Simulation and practical example show that this method has good filtering effectiveness; it can abstract the valuable frequency component for elementary fault diagnosis. This method has simple algorithm and high calculation speed.
Wavelet Multifractal Approaches for Singularity Analysis of Vibration Signals

Z Peng,Y He,D Guo,F Chu

DOI: https://doi.org/10.4028/www.scientific.net/kem.245-246.565

2003-01-01

Abstract:For rotating machinery, there may exist many kinds of malfunctions that will influence the normal operation, such as oil whirl, coupling misalignment, rub-impact etc, whose vibration signals often have different singularity properties. The multifractal spectrum, also called singularity spectrum, calculated by the wavelet transform modulus-maxima (WTMM) method is a comprehensive reflection of the distribution of the singularities of signals. In this paper, the WTMM method for multifractal spectrum is introduced, and the multifractal spectra are used to analyze the experimental data of rub-impact, oil whirl, coupling misalignment and imbalance faults. The results show that the vibration signals of the rub-impact have the strongest singularity; the signals of the coupling misalignment are the next and the signals of the imbalance have the weakest singularity. It means that some features can be extracted from the multifractal spectra for fault diagnosis.
Sensor Fault Detection Based on Wavelet Analysis

GOU Lin-feng,WANG Yong-gen

DOI: https://doi.org/10.3969/j.issn.1006-9348.2007.11.008

2007-01-01

Abstract:In view of the problem that aero engine control system sensor fault detection easily causes mistake in strong noise condition,this paper designs a sensor fault detection method based on modulus maxima.The theory of detecting fault by wavelet singularity is first introduced,then the modulus maxima caused by noise is determined according to the Lipschitz.The detection algorithm based on modulus maxima theory for typical sensor fault is given,and the fault detection is simulated using wavelet modulus.The simulation results of turbofan engine control system sensor fault show that the character of singularity can be described strictly by wavelet transform,and this method is effective on dliminating noise.
Fault feature extracting by wavelet transform for control system fault detection and diagnosis

Ren, Z.,Jie Chen,Xiaojing Tang,Weisheng Yan

DOI: https://doi.org/10.1109/CCA.2000.897471

2000-01-01

Abstract:The paper deals with the problem of fault feature extraction from the residual in the model-based control system fault detection and diagnosis, based on the fact that the wavelet transform of a signal will maximise the modulus at its singular point in the transform domain, and the fault error has positive singularity exponent while the noise has negative singularity exponent at the corresponding singular points; the fault error and noise mixed in the residual can be separated from each other by multi-scale wavelet transform, and the modulus maximum can be taken as the fault feature, so that the fault feature becomes clearer and more recognizable and a correct decision as to whether the system fault will take place or not can be correctly made in the transform domain. This makes it easy to detect and diagnose faults in the control system
Bearing Fault Detection Via Wavelet Packet Transform and Rough Set Theory

Cheng Li,Zhihuan Song,Ping Li

DOI: https://doi.org/10.1109/wcica.2004.1340953

2004-01-01

Abstract:A novel method for bearing fault detection through the sound signal translated from the vibration signal is introduced. The wavelet packet transform is used to preprocess the signal, then the computed wavelet coefficients are divided into clusters accordingly, important frequency ranges have a larger number of clusters than less important frequency ranges. These clusters extract the time-frequency information to get the fault characteristic of the bearing. In order to identify the fault, the method based on rough set theory is adopted. The result from experience proves that fault types can be identified and diagnosed by the above method. Furthermore, it attains nearly the same accuracy, compared with artificial neural network.
The Application of the Fuzzy Neural Network-Wavelet Singularity Detection in Mechanical Fault Diagnosis of High Voltage Breakers

Sun Laijun,Hu Xiaoguang,Ji Yanchao,Lv Chao

DOI: https://doi.org/10.1109/imtc.2005.1604558

2005-01-01

Abstract:In this paper, a new method that the wavelet singularity detecting and NN of fuzzy combined to process the mechanism libration signal of the HV breaker is introduced, which is called the NN of fuzzy singularity. This is a new method that the wavelet singularity exponent of fuzzification combined with the multilayer feedforward NN is imported to the mechanism fault diagnosis of the HV breaker. The experimental results show that this method can achieve better effect than the wavelet singularity detecting and improves the accuracy and precision of diagnosis
EFFECT OF WAVELET CHARACTERISTIC IN SINGULARITY DETECTION

ZHU Qiang,LI Yan-jun,ZHANG Jian-hua,ZHANG Duo

DOI: https://doi.org/10.3969/j.issn.1000-5811.2007.04.025

2007-01-01

Abstract:Some mutant information is contained in the discontinuous point of signal.The paper discussed the effect of the discontinuous point detection from two aspects,validity and precision.By analyzing different wavelet transformation,the required condition was proposed.In the discontinuous point detection,the vanishing moment of wavelet must higher than the rank of discontinuous point.And the support interval of wavelet can affect the precision of detection.At end,the selection method of wavelet is given in this paper.

Singularity Detection Through the Hermitian Wavelet and Rotating Mechanical Fault Diagnosis

Singularity Detection and Feature Extraction Based on Analytic Wavelet Transform

Harmonic Wavelet Package Method Used to Extract Fault Signal of a Rotation Machinery

Singularity recognization of vibration signal based on Hermitian wavelet for diagnosis

Singularity Detection Using AWT with Application to Fault Diagnosis

Signal Singularity Detection Based on the Hermitian Wavelet for Fault Diagnosis

Wavelet Fault Detection Based on Filtering Pretreatment

Study on application of wavelet transform technique to fault diagnosis of rotary machine

Application of Wavelet Transform in Fault Diagnosis to Indicate the Singularity of Signal

Singularity analysis of the vibration signals by means of wavelet modulus maximal method

The application of wavelet singularity detection in fault diagnosis of high voltage breakers

Hybrid Wavelet Analysis of Vibration Signal Singularity for Condition Monitoring and Fault Prognosis

THE FAULT DIAGNOSIS OF HIGH VOLTAGE BREAKERS BASED ON WAVELET SINGULARITY DETECTION

The Study of Machinery Vibration Fault Diagnosis Detection System Based on Wavelet Transformation

A New Method for Fault Diagnosis of Rotating Machinery Based on Harmonic Wavelet Filtering

Wavelet Multifractal Approaches for Singularity Analysis of Vibration Signals

Sensor Fault Detection Based on Wavelet Analysis

Fault feature extracting by wavelet transform for control system fault detection and diagnosis

Bearing Fault Detection Via Wavelet Packet Transform and Rough Set Theory

The Application of the Fuzzy Neural Network-Wavelet Singularity Detection in Mechanical Fault Diagnosis of High Voltage Breakers

EFFECT OF WAVELET CHARACTERISTIC IN SINGULARITY DETECTION