Research and Development of Digital Set－to－box Based on Cable

Yu Fang

2001-01-01

Abstract:This paper presentsiscuss the operating principle， structure and function of DVB-C． A functional prototype is successfully developed and the anticipated functional requirements are satisfied．

What problem does this paper attempt to address?

Digital Demodulator Design For Dvb-S2

Yang Jianxiao,Wang Kuang,Zou Zhiyong

2006-01-01

Abstract:This paper details on the design of DVB-S2 demodulator. The architecture of the demodulator compliant with the CCM (Constant Coding and Modulation) mode comprises timing recovery unit, frame synchronization unit, frequency recovery unit and frequency phase recovery unit. The system is easier to hardware implementation comparing with the system provided in [41 and [8]. After the key demodulation algorithms were discussed, a quantitative result is given, this allows us to draw conclusions concerning the achievable system performance under realistic complexity assumptions.
Design of DVB-C Mapping Circuit

包莉娜,梁坚,易志强,王匡

DOI: https://doi.org/10.3969/j.issn.1000-0755.2003.08.006

2003-01-01

Abstract:This paper focuses on the principles and method of mapping circuit in digital cable television(DVB-C),DVB-C System and implementation in ASIC(Applicatio n Specific Integrated Circuits)of DVB-C channel receiver.
Design and Implementation of a Video on Demand System

Kuang Wang

2006-01-01

Abstract:This paper introduces a Video on Demand system based on both CATV broadcasting channels and IP interactive network. CATV broadcasting channels are used for content transmission and IP network is used for control information transmission between Set Top Box and Headend Server. The control mechanism of whole system is designed and implemented according to DSM-CC protocol stacks. The paper narrates the end-to-end system diagram and VoD application software of Set Top Box. The system can be used in CATV network and provide VoD services for CATV subscribers.
An All-digitized OFDM Demodulator for DVB-T

董斌,徐元欣,王匡,仇佩亮

DOI: https://doi.org/10.3969/j.issn.1007-0249.2004.03.008

2004-01-01

Abstract:As an effective digital modulation scheme, OFDM is widely used in wideband digital communication systems, such as DVB-T. In this paper, an all-digitized OFDM demodulator for DVB-T is proposed. Based on the analysis of those factors that interfere with demodulation, the architecture of demodulator is presented. Then functional modules that implement digitized demodulator, such as symbol synchronization, carrier synchronization, clock synchronization, and channel compensation, are explained. At the end, the BER performance of the demodulator is given. As the result shows, the all-digitized demodulator has good performance.
Implementation of a New Design of Digital Set Top Box System Software Updating

ZHAI En,SONG Jing-tao,WANG Kuang

DOI: https://doi.org/10.3969/j.issn.1007-7022.2005.15.001

2005-01-01

Abstract:Software online updating via network is one of essential functionalities of digital set top boxes. This paper introduces the principles of the software updating functionality, and gives a new design based on embedded Linux operation system. Finally, the efficiency and performance of the scheme are analyzed.
An Implementation Scheme of Symbol-Processing in DVB-S Receiver

YI Zhi-qiang,Huang Zhi-jie,WANG Kuang

DOI: https://doi.org/10.3969/j.issn.1001-7119.2005.04.019

2005-01-01

Abstract:This paper proposes an implementation scheme of symbol-processing in DVB-S receiver. By using Secondary Encode and special sync-searching byte-recovering circuits, not only the processing time reduces remarkably, but also needs less hardware resource. This scheme has already been applied in the chip design of satellite digital television.
A Transmission Scheme of the Advanced Digital Television Broadcasting System

张文军,夏劲松,王匡,葛建华

DOI: https://doi.org/10.3969/j.issn.1002-8692.2002.01.003

2002-01-01

Abstract:With the co-efforts from Zhejiang University,Shanghai Jiao Tong University and Xidian Universi-ty,a transmission scheme of the Advanced Digital Television Broadcasting System(ADTB)is presented in this paper.The simulated system functions and performance are superior to that of international DTV transmission standards.A stable fixed,portable and even mobile reception of large volume broadcasting data can be attained with a consumer grade tuner and various modulation modes.The scheme is also designed to support SFN and on-channel repeater functions,to incorporate efficient digital cable transmission modes,and to be easily compatible with some foreign standards.The presented scheme is one of the ideal candidates of DTV broadcasting standards being defined in our country.[
A Comparison on Vsb and Cofdm Used in Hdtv Terrestrial Broadcasting

QD Yao,K Wang,G Yang,PL Qiu

DOI: https://doi.org/10.1109/isce.1997.658351

1997-01-01

Abstract:There is a worldwide impact to the TV broadcasting and consumer electronics industries starting from the decision of the FCC, of which the transition period of SDTV to digital will be completed in the year of 2006. The digital television era seems to be arriving earlier than that has ever been expected. How to face the challenge of this new era is a serious concern of the industries at present. The VSB transmission system is accepted for terrestrial broadcasting of DTV in the US. As a counterpart, the COFDM system is accepted for DVB. It is natural of interested to investigate these two transmission schemes and compare the performance and the methods of implementation. The simulation results of their performance are presented and a comparison of the hardware implementations is included
DVB-S2 Inner Receiver Design for Broadcasting Mode

Yang Jian-xiao,Wang Kuang,Zou Zhi-yong

DOI: https://doi.org/10.1631/jzus.2007.a0028

2006-01-01

Journal of Zhejiang University SCIENCE A

Abstract:This paper details on the design of DVB-S2 receivers which is compliant with the broadcasting mode. Special attention is paid to the specific receiver functions necessary to demodulate the received signal. To show the system performance we consider the design of a complete receiver consisting of timing recovery unit, frame synchronization unit, frequency recovery unit and phase recovery unit. The system is easier to hardware implementation comparing with that provided in (ETSI, 2005; Sun et al. , 2004). After the performance of the algorithms is analyzed and a quantitative result is given, this allows us to draw conclusions concerning the achievable system performance under realistic complexity assumptions.
Implementing a DVB-T/H Receiver on a Software-Defined Radio Platform

Yong Jiang,Wen Xu,Cyprian Grassmann

DOI: https://doi.org/10.1155/2009/937848

2009-01-01

Abstract:Digital multimedia broadcasting is available in more and more countries with various forms. One of the most successful forms is Digital Video Broadcasting for Terrestrial (DVB-T), which has been deployed in most countries of the world for years. In order to bring the digital multimedia broadcasting services to battery-powered handheld receivers in a mobile environment, Digital Video Broadcasting for Handheld (DVB-H) has been formally adopted by ETSI. More advanced and complex digital multimedia broadcasting systems are under development, for example, the next generation of DVB-T, a.k.a. DVB-T2. Current commercial DVB-T/H receivers are usually built upon dedicated application-specific integrated circuits (ASICs). However, ASICs are not flexible for incoming evolved standards and less overall-area efficient since they cannot be efficiently reused and shared among different radio standards, when we integrate a DVB-T/H receiver into a mobile phone. This paper presents an example implementation of a DVB-T/H receiver on the prototype of Infineon Technologies' Software-Defined Radio (SDR) platform called MuSIC (Multiple SIMD Cores), which is a DSP-centered and accelerator-assisted architecture and aims at battery-powered mass-market handheld terminals.
Physical Layer Design For Dvb-S2 Ccm Mode

Yang Jianxiao,Wang Kuang,Zou Zhiyong

DOI: https://doi.org/10.1109/ISPACS.2006.364809

2006-01-01

Abstract:This paper details on the design of DVB-S2 receivers which is compliant with the constant coding and modulation (CCM) mode. Special attention is paid to the specific receiver functions necessary to demodulate the received signal. To show the system performance we consider the design of a complete receiver consisting of timing recovery unit, frame synchronization unit, frequency recovery unit, frequency phase recovery unit and a digital automatic gain controller. The system is easier to hardware implementation comparing with the system provided in [4] and [8]. After the performance of the algorithms is analyzed and a quantitative result is given, this allows us to draw conclusions concerning the achievable system performance under realistic complexity assumptions.
Counter-Set Based PCR Jitter Correction Method for DVB-T System

Xi Peng,Jingtao Song,Kuang Wang

DOI: https://doi.org/10.1109/wicom.2007.730

2007-01-01

Abstract:DVB-T is a popular digital video broadcasting standard for wireless digital terrestrial television implementation. Program clock reference, PCR in short, is an important time stamp in DVB-T transport stream. The reason PCR jitter based on DVB-T standard is analyzed and some methods for PCR jitter correction are described and compared. A new method to correct PCR is presented, named as Counter-Set. The principle and system implementation for the method are discussed, and this method is compared with original ones for PCR jitter correction. Counter-Set method and Compensation method are implemented based on FPGA. Results are presented and compared. We get the conclusion that the new method greatly reduces the use of logic units, so it is more efficient than the original one.
System Dynamic Building for Set Top Box

LENG Xiang-lun,CHEN Yong-ning,ZHOU Zu-cheng

DOI: https://doi.org/10.3969/j.issn.1002-8692.2005.09.015

2005-01-01

Abstract:This paper analyses the new problems caused by the rapid development of digital television (DTV) and the corresponding solutions, and proposes a flexible and effective solution called System Dynamic Building (SDB) for Set Top Box (STB). Then the design and implementation of SDB are presented. After introducing two applications that are modularization download and multi-CAS supporting, we conclude that the SDB technique will strongly increase profit spaces for the related links of DTV industry chain and ensure the benefits of customers, So it is an all-win solution.
An Implementation of Interactive Set-Top-Box and Its Applications

Bing Hu,Guobin Wu,Liang Pan,Hong Ni,Ming Zhu

DOI: https://doi.org/10.1109/ICOSP.2006.346102

2007-01-01

Abstract:With the deployment of two ways HFC network and the development of digital TV, more and more interactive applications are being developed based on bi-directional HFC network. And the implementation of interactive cable set-top-box of digital TV is one of key component, which offers various interactive services based on TV display. In this paper, we implement an interactive cable set-top-box with embedded Linux operating system and cable modem with Euro-DOCSIS1.1 specification, and then we depict our novel applications such as PUSH service and our killer application video on demand (VOD)
Research of a New VOD System on Set-Top-box

JQ Yang,L Zhang,GW Wu

DOI: https://doi.org/10.1109/icii.2001.983538

2001-01-01

Abstract:In recent years, many multimedia requests have been posed with the development of broadband networks. Against this background, this article introduces the DAVIC (Digital Audio-Visual Council) specifications and a reference design of set-top-box which is given by Broadcom Corporation. The article designs a new VOD system based on the reference design
Research on a Universal CA Architecture Based on DVB-C

Feng DONG,Yue ZHANG,Shao-hua LI,Zu-cheng ZHOU

DOI: https://doi.org/10.3969/j.issn.1002-8692.2005.09.014

2005-01-01

Abstract:In this paper, the authors discuss Software-Hardware Detachable Technology in STB on its key points: CA soft architecture and relationships of the application interfaces, and then propose a universal CA software architecture based on DVB-C. The architecture can make the development of the CA system and that of IRD independently, so we have solved the key issue in Software-Hardware Detachable Technology for STB successfully.
Software Update Standard of DVB System

SONG Jing-tao,WANG Kuang,ZHANG Ming

DOI: https://doi.org/10.3969/j.issn.1007-7022.2005.07.003

2005-01-01

Abstract:Software updating is a basic function of digital set top box, especially set top box. This paper introduces the DVB system software update specification, which includes network signal, PSI signal, two layer data carousel structure for system software update services, update notification table and some interworking requirement for operates and set top boxe.
The Design of Digital TV Metropolitan Area VOD System Based on DVB-C Standard

WU Yu,TANG Ji-yong

DOI: https://doi.org/10.3969/j.issn.1007-7022.2006.06.004

2006-01-01

Abstract:The digital TV VOD service is one of the most potential services for developing Chinese CATV.In this paper combining with practical situation a digital TV metropolitan area VOD system is presented.The system based on the HFC network and DVB-C standard.It can support TVOD services and NVOD services simultaneously.
Study and Design of the Digital Interactive Set-Top-Box

孙鹏,倪宏,王劲林

DOI: https://doi.org/10.3969/j.issn.1007-7022.2003.05.010

2003-01-01

Abstract:Interactive television (ITV) as a new form of TV programs has become a direction of broadcast trade development, at the same time the study of the interactive set-top-box has become the focus recently. This paper introduces an interactive set-top-box system. Firstly, the hardware and software architectures of the system are introduced generally, then several key parts of the system are described in detail. The system has been gone into testing in the CCTV's interactive television broadcasting project, and meets the anticipative design requests.
The Design and Implementation of a DVB Receiving Chip with PCI Interface

Xu Ningyi,Li Shaohua,Yu Wei,He Guanghui,Zhang Hao,Luo Fei,Zhou Zucheng

DOI: https://doi.org/10.1145/1120725.1120893

2005-01-01

Abstract:A DVB receiving chip with PCI interface for PC is presented. The chip supports DVB protocols and integrates useful interfaces, including I 2 C, SmartCard and PCI. A card with this chip could change PC into digital TV terminal. The architecture of FPGA prototype system together with some main design issues is introduced. The experimental result shows that the chip could accomplish required functionalities.

Research and Development of Digital Set－to－box Based on Cable

Digital Demodulator Design For Dvb-S2

Design of DVB-C Mapping Circuit

Design and Implementation of a Video on Demand System

An All-digitized OFDM Demodulator for DVB-T

Implementation of a New Design of Digital Set Top Box System Software Updating

An Implementation Scheme of Symbol-Processing in DVB-S Receiver

A Transmission Scheme of the Advanced Digital Television Broadcasting System

A Comparison on Vsb and Cofdm Used in Hdtv Terrestrial Broadcasting

DVB-S2 Inner Receiver Design for Broadcasting Mode

Implementing a DVB-T/H Receiver on a Software-Defined Radio Platform

Physical Layer Design For Dvb-S2 Ccm Mode

Counter-Set Based PCR Jitter Correction Method for DVB-T System

System Dynamic Building for Set Top Box

An Implementation of Interactive Set-Top-Box and Its Applications

Research of a New VOD System on Set-Top-box

Research on a Universal CA Architecture Based on DVB-C

Software Update Standard of DVB System

The Design of Digital TV Metropolitan Area VOD System Based on DVB-C Standard

Study and Design of the Digital Interactive Set-Top-Box

The Design and Implementation of a DVB Receiving Chip with PCI Interface