Abstract:The performance of lead-acid batteries could be significantly increased by incorporating carbon materials into the negative electrodes. In this study, a modified carbon material developed via a simple high-temperature calcination method was employed as a negative electrode additive, and we have named it as follows: N-doped chitosan-derived carbon (NCC). The performance of this material was compared with a control battery containing activated carbon (AC). X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectroscopy were engaged in analyzing the crystal structure and morphology of the material. Afterwards, the electrochemical and battery performance was examined through cyclic voltammetry (CV), linear voltammetry (LSV) and constant current charge-discharge testing. Markedly, the electrode plate containing 1 wt.% NCC indicates the highest specific capacity (106.48 F g−1) as compared to the control battery, which is 1.56 times higher than the AC electrode plate and 4.75 times higher than the blank electrode plate. The linear voltammetry shows that the hydrogen precipitation current density of the 1 wt.% NCC electrode plate is only −0.028 A cm−2, a much higher value than that of the AC electrode plate. In addition, the simulated battery containing 1 wt.% NCC has a cycle life of 4324 cycles, which is 2.36 times longer than that of the same amount of additive AC battery (1834 cycles) and 5.34 times longer than that of the blank battery (809 cycles). In summary, NCC carbon has the advantage of extending the life of lead-acid batteries, rendering it a promising candidate for lead-acid battery additives.

Performance of a New Negative Grid for Lead-Acid Battery

High gravimetric energy density lead acid battery with titanium-based negative grids employing expanded mesh sandwich structure

Development of titanium-based positive grids for lead acid batteries with enhanced lightweight, corrosion resistance and lifetime

Performance Study of Large Capacity Industrial Lead‑carbon Battery for Energy Storage

Novel Polymer-Graphite Composite Grid As a Negative Current Collector for Lead-Acid Batteries

Direct Re-Usability of Lead-Plated Tin Bronze as Negative Plate for Lightweight Lead-Acid Battery

Construction of conductive oxide layer on the surface of lead alloy grid for the long life of lead acid batteries

Influence of lead foam grid on charge acceptance of VRLA battery

Effects of lead-foam grids on performance of VRLA battery

Modified titanium foil's surface by high temperature carbon sintering method as the substrate for bipolar lead-acid battery

The Influences of Silver and Zinc Addition on the Electrochemical Performances of the Pb–Ca–Sn Grids for Lead Acid Batteries

Investigation of discharged positive material used as negative additive for lead-acid battery

An experimental study on polymer cathode materials in lead-acid battery energy storage systems

Preparation of NH4Cl-Modified Carbon Materials via High-Temperature Calcination and Their Application in the Negative Electrode of Lead-Carbon Batteries

Study of influence of lead foam as negative electrode current collector material on VRLA battery charge performance

Recycled and vanadium-doped materials as negative electrode of the lead acid battery

Fabrication of PbSO 4 Negative Electrode of Lead-Acid Battery with High Performance

Research on electrochemical performance of positive plates of lead-acid batteries

The use of nanometer tetrabasic lead sulfate as positive active material additive for valve regulated lead-acid battery

Improving Corrosion Resistance of Lead-Alloy Positive Grid of Lead-Acid Battery by an Electrochemical Prepassivation Interphase

Effects Of Lead Foam On Structure And Characteristic Of Negative Active Materials In Vrla Batteries