Template-Directed Synthesis of Sulfide Semiconductors

Qing Zhang

2002-01-01

Abstract:A series of nanowires of metal sulfide semiconductors were prepared with both hexagonal liquid crystals and AAO membranes as the synthesis templates. Mesoporous cadmium sulfide and lead sulfide were also obtained in the hexagonal liquid crystals.

What problem does this paper attempt to address?

Synthesis of Sulfide Nanowire Arrays through Template-Assisted Electrodeposition

Li Sun,Rui Long Zong,Shi Kao Shi,Ji Zhou

DOI: https://doi.org/10.4028/www.scientific.net/KEM.336-338.2163

2007-01-01

Key Engineering Materials

Abstract:Sulfide nanowire arrays have been synthesized by DC electrodeposition from an electrolyte containing Sin DMSO. The AAO membrane with the barrier layer has been directly used as template in electrodeposition. The as-synthesized products are characterized by SEM, TEM and resonance Raman spectroscopy. CdS and ZnS nanowires have been obtained, respectively.
The Assembly of Semiconductor Sulfide Nanocrystallites with Organic Reagents As Templates

QY Lu,F Gao,DY Zhao

DOI: https://doi.org/10.1088/0957-4484/13/6/309

IF: 3.5

2002-01-01

Nanotechnology

Abstract:An organic reagent-assisted method has been developed for the synthesis and assembly of copper sulfide, cadmium sulfide and silver sulfide nanocrystallites at low temperature under hydro- or solvothermal conditions. Nanowire-like aggregates (with an average diameter of 120 nm and length of 2 μm) assembled by digenite phase copper sulfide nanoparticles, nanotube-like aggregates (with diameters ranging from 40 to 200 nm and lengths from 400 nm to 4 μm) and nanovesicle-like aggregates (with size ranging from 50 to 180 nm) assembled using djurleite phase copper sulfide nanoparticles have been obtained using triethylenediamine, tramethylethylenediamine and di-n-butylamine as the linking agents, respectively. A cetyltrimethyl-ammonium bromide-assisted solvothermal process with CdCl2 and thiourea as the reactants and ethylenediamine as the solvent has been proposed to control the length of the CdS nanorods from 300 nm to 4.5 μm and construct novel CdS nanorod-based structures, including polydentate wire-like architectures and polydentate sphere-like architectures composed of dozens of CdS nanorods of 10 nm in width and 100 nm in length. A CH3(CH2)11SH-template method has been adopted to realize the synthesis and the simultaneous assembly of silver sulfide nanocrystallites with AgNO3 and Na2S as reactants. By changing the reaction temperature and the dodecylthiol concentration, two-dimensional orthogonal and hexagonal-like ordered silver sulfide nanoparticle arrays and quasi-orthogonal silver sulfide nanorod arrays can be obtained. This organic reagent-assisted route is very simple and can be extended to the synthesis and assembly of other semiconductor sulfide nanocrystals.
Synthesis of Hierarchical CuS Flower-Like Submicrospheres Via an Ionic Liquid-Assisted Route

Lihua Wang,Chao Xu,Dingbing Zou,Hao Luo,Taokai Ying

DOI: https://doi.org/10.1007/s12034-008-0148-4

IF: 1.878

2008-01-01

Bulletin of Materials Science

Abstract:A facile, ionic liquid-assisted route was developed to synthesize hierarchical CuS flower-like submicrospheres at 80°C for 24 h. The method was based on a reaction between CuCl2 and thioacetamide (TAA) in aqueous solution with using ionic liquid 1-n-butyl-3-methylimidazolium chloride ([BMIM]Cl) as an assisted agent. The chemical composition, morphology and size of CuS product were characterized by XRD, SEM and TEM. The result shows that the as-prepared CuS consists of flowery spheres with a diameter of 0·6 ∼ 1·0 μm, and these submicrospheres are, in fact, built by numerous nanoflakes with a thickness of 10 ∼ 20 nm. The optical property of CuS product was examined by UV-Vis. In general, we suggested an ecologically and environmentally friendly route for the syntheses of hierarchical metal chalcogenides structures in this paper.
Ordered Nanowire Arrays of Metal Sulfides Templated by Mesoporous Silica SBA-15 via a Simple Impregnation Reaction

Xiaoying Liu,Bozhi Tian,Chengzhong Yu,Bo Tu,Zheng Liu,Osamu Terasaki,Dongyuan Zhao

DOI: https://doi.org/10.1246/cl.2003.824

2003-01-01

Chemistry Letters

Abstract:Well-patterned crystalline nanowire arrays of binary compound metal sulfides, CdS, ZnS, and In2S3, were synthesized for the first time employing a simple impregnation reaction procedure from two separate precursors (metal and sulfur precursors) using mesoporous SBA-15 as a hard template.
Synthesis of ZnS Nanowires in Liquid Crystal Systems

Y Li,JH Wan,ZN Gu

DOI: https://doi.org/10.1080/10587259908023410

1999-01-01

Abstract:The synthesis of ZnS nanowires in hexagonal liquid crystal systems was studied. II was found that the hexagonal liquid crystal can act as the synthesis template in proper condition.
A Synthetic Method for Transition-Metal Chalcogenide Nanocrystals.

Ding-Sheng Wang,Wen Zheng,Chen-Hui Hao,Qing Peng,Ya-Dong Li

DOI: https://doi.org/10.1002/chem.200801815

2009-01-01

Chemistry - A European Journal

Abstract:In this paper, we prepared a series of chalcogenide semiconductor nanocrystals in controllable shape and size via a facile wet route using metal nitrates and sulfur or selenium powder as precursors and octadecylamine (ODA) as solvent. The as-obtained chalcogenides included CdS, MnS, Ag(2)S, PbS, Cu(1.8)S, Bi(2)S(3), ZnS, Zn(x)Cd(1-x)S, as well as Ag(2)Se, Cu(2-x)Se, CdSe, MnSe. Furthermore, these cyclohexane-soluble monodisperse nanocrystals were assembled to water-soluble colloidal spheres and the adjustment of assembly orderliness has been achieved by controlling the experimental parameters. The general synthesis and assembly of chalcogenide semiconductors provide ideal building blocks for various potential applications.
Nanoporous arrays of metal sulfides templated by mesoporous silica

X. Liu,B. Tian,C. Yu,B. Tu,D. Zhao

DOI: https://doi.org/10.1016/S0167-2991(04)80907-8

2004-01-01

Abstract:By using mesoporous silica SBA-15 as a hard template, ordered crystalline nanoporous arrays of binary metal Sulfides such as CdS, ZnS, In2S3, have been synthesized for the first time employing two simple impregnation reaction procedures from two separate precursors (metal and sulfur precursors). In the one-step synthetic process, the metal and sulfide precursors were introduced into the channels of SBA-15 simultaneously followed by ail annealing heat treatment. The resulted nanoporous metal sulfides are composed of ordered crystalline nanowire arrays connected with short rods, which have great potential in applications for the development of electronic, photonic and catalytic systems. While in the two-step process, the two precursors were incorporated into SBA-15 sequentially. As a result, either loosely packed nanoporous arrays or winding nanoropes have been obtained depending on the metal and sulfide species utilized. The optical properties have been characterized by UV-vis diffuse reflectance and photoluminescence (PL) analyses.
Synthesis of ZnS Nanowires by DC Electrodeposition in AAO Template

Zhou Ji

2005-01-01

Abstract:Polycrystalline ZnS nanowires have been synthesized by DC electrodeposition in the nanochannels of porous AAO templates from an electrolyte containing Zn 2+ and S in DMSO. The as-synthesized products are characterized by SEM,TEM and resonance Raman spectroscopy. When the samples are annealed in N_2 atmosphere and ambient conditions, the Raman spectra indicate that ZnS nanowires with a cubic crystal structure and ZnO nanowires with a hexagonal wurtzite structure have been obtained, respectively.
Nanostructured Lead Sulfide Containing Nanoholes Templated by Lyotropic Hexagonal Liquid Crystals

Y Li,QM Zhang,FZ Huang,ZN Gu

2000-01-01

Abstract:The hexagonal liquid crystal mediated synthesis of nanostructured PbS was studied. Thioacetamide and lead acetate were used as the sulfide and lead source, respectively. It was found that the nanohole structure of PdS was formed in this system.
Synthesis of Sulfides Nanomaterials at Aqueous-Organic Interfaces

Huaqiang Shi,Xiaodong Zhou,Yusheng Lin,He Liu,Xun Fu

DOI: https://doi.org/10.1080/01932690802498187

2009-01-01

Journal of Dispersion Science and Technology

Abstract:CdS, CuS and MoS2 semiconductors were successfully synthesized at the aqueous-organic interfaces via the chemical synthesis method. The Cd2+, Cu2+, and ions were extracted into organic phase by the extractant di- (2,4,4-trimethylpentyl) monothiophosphinic acid firstly, then the obtained Cyanex 302-Cd2+ (Cu2+ or ) complexes in organic phase reacted with S2− in the aqueous phase at the aqueous-organic interfaces to synthesize sulfide nanomaterials, respectively. The obtained nanomaterials were characterized by x-ray powder diffraction, transmission electron microscopy and electron diffraction, respectively. It could be seen that the extractant played several functions in the whole procedure: the phase transferring agent, the morphology controlling agent and surface-modifying agent.
Sol-Gel Template Synthesis of an Array of Single Crystal Cds Nanowires on A Porous Alumina Template

HQ Cao,Y Xu,JM Hong,HB Liu,G Yin,BL Li,CY Tie,Z Xu

DOI: https://doi.org/10.1002/1521-4095(200109)13:18<1393::aid-adma1393>3.0.co;2-c

IF: 29.4

2001-01-01

Advanced Materials

Abstract:An array of single crystal CdS nanowires has been fabricated in the pores of an alumina membrane by sol–gel synthesis. The CdS crystals have a hexagonal structure, which is verified by electron diffraction. As CdS is an important semiconducting material this synthesis may prove very useful for the fabrication of nanosized semiconducting structures. The Figure shows a scanning electron microscopy image of the nanowires.
Phase-Selective Synthesis and Self-Assembly of Monodisperse Copper Sulfide Nanocrystals

Hui Zhang,Yiqiang Zhang,Jingxue Yu,Deren Yang

DOI: https://doi.org/10.1021/jp801507h

2008-01-01

Abstract:Single-crystalline, monodisperse copper sulfide nanocrystals with controlled sizes, shapes. and phases were successfully synthesized via a simple, low-cost, and environmentally friendly chemical reaction of CuCl, and S in oleylamine at 100-180 degrees C. It was found that the molar ratios of [CuCl2]:[S] played the critical role for the control of the sizes, shapes, and phases of copper sulfide nanocrystals. The hexagonal CuS nanodisks, hexagonal CuS nanoribbons consisting of face-to-face stacked nanodisks, and monoclinic Cu1.75S nanoribbons consisting of face-to-face stacked nanodisks were obtained when the molar ratios of [CuCl2]:[S] were 1:1, 2:3, and 2:1, respectively. It was believed that the van der Waals force and dipole-dipole interaction were responsible for the self-assembly of copper sulfide nanodisks. Finally, the copper sulfide nanocrystals were characterized by transmission electron microscopy, high-resolution transmission electron micrscopy, X-ray diffraction, and Fourier transform infrared, and its growth mechanism was primarily discussed.
Simultaneous in Situ Formation of ZnS Nanowires in a Liquid Crystal Template by Γ-Irradiation

X Jiang,Y Xie,J Lu,LY Zhu,W He,YT Qian

DOI: https://doi.org/10.1021/cm0006143

IF: 10.508

2001-01-01

Chemistry of Materials

Abstract:Semiconductor ZnS nanowires were synthesized by a direct templating route in an inverted hexagonal liquid crystal formed by oligo(ethylene oxide)oleyl ether amphiphiles, n-hexane, n-hexanol/i-propanol (2:1), and water. The final product consists of ordered nanowires with a diameter of ca. 5 nm. Most importantly, seven or more close-packed nanowires aggregate to form a regularly shaped bundle with a width of ca. 10-30 nm, duplicating the hexagonal structure of close-packed inverted micelles formed by amphiphiles. We propose a novel simultaneous in situ formation (SISF) technique to synthesize ordered ZnS nanowires by gamma -irradiation at room temperature. The reaction is worth noting in that its occurrence is homogeneous and simultaneous. The structures of the inverted hexagonal liquid crystal phase and the final product were characterized by means of polarized optical microscopy (POM), XRD, XPS, TEM and EDX techniques. UV-vis and PL spectra recorded the optical properties of the ZnS nanowires. The amount of amphiphiles passivated with ZnS nanowires is similar to3.4 wt %, as determined by thermal gravimetric analysis (TGA).
A TEMPLATE-FREE SOLUTION METHOD BASED ON SOLID-LIQUID INTERFACE REACTION TOWARDS DENDRITIC PbSe NANOSTRUCTURES

JUN LIU,DONGFENG XUE

DOI: https://doi.org/10.1142/S0217984909021879

2011-01-01

Modern Physics Letters B

Abstract:A template-free solution method based on solid-liquid interface reaction has been developed for fabricating metal chalcogenide dendritic nanostructures. Well-defined PbSe. dendrites with four branches can be large-scale synthesized with metal lead foil as Pb2+ source and Na2SeO3 as Se2+ source in solvothermal conditions. The nanorods in each branch are parallel to each other in the same plane and are perpendicular to the trunk. It was found that PbSe cubes first formed on the lead substrate through a direct surface reaction and that subsequent crystal growth preferentially took place on the vertex of these PbSe cubes, leading to the formation of final branched dendrites. The current solid-iquid interface reaction has been extended to the synthesis of CuS micro-pine dendrites with copper foil and sulfur powder as reaction reagents
Synthesis of Crystalline Mesoporous CdS Semiconductor Nanoarrays Through a Mesoporous SBA‐15 Silica Template Technique

F Gao,QY Lu,DY Zhao

DOI: https://doi.org/10.1002/adma.200304758

IF: 29.4

2003-01-01

Advanced Materials

Abstract:A novel crystalline mesoporous CdS semiconductor(see Figure) has been synthesized with the aid of a mesoporous silica template through a simple single precursor decomposition route at low temperature. The precursor used—cadmium thioglycolate [Cd10S16C32H80N4O28]—is not only the Cd but also the S source. The resultant CdS material is an inverse replica of the silica template and retains its mesostructured order.
Micelle-template Inducing Synthesis of Winding ZnS Nanowires

Qingsheng Wu,Nengwu Zheng,Yaping Ding,Yadong Li

DOI: https://doi.org/10.1016/s1387-7003(02)00523-3

2002-01-01

Abstract:Semiconductor single-crystal ZnS nanowires with diameters 40–80 nm and lengths up to tens of micron, which can bend and wind, have been synthesis by the reaction of Zn2+ with S2− in reverse micelle for the inducing template. The formation mechanism of ZnS nanowires has been studied. The results indicated that the formation of ZnS nanowires probably was via the process of the directional aggregation and orientated growth of the ZnS nanoparticles.
A General Method for the Large-Scale Synthesis of Uniform Ultrathin Metal Sulphide Nanocrystals

Yaping Du,Zongyou Yin,Jixin Zhu,Xiao Huang,Xue-Jun Wu,Zhiyuan Zeng,Qingyu Yan,Hua Zhang

DOI: https://doi.org/10.1038/ncomms2181

IF: 16.6

2012-01-01

Nature Communications

Abstract:Ultrathin metal sulphide nanomaterials exhibit many unique properties, and are thus attractive materials for numerous applications. However, the high-yield, large-scale synthesis of well-defined ultrathin metal sulphide nanostructures by a general and facile wet-chemical method is yet to be realized. Here we report a universal soft colloidal templating strategy for the synthesis of high-quality ultrathin metal sulphide nanocrystals, that is 3.2 nm-thick hexagonal CuS nanosheets, 1.8 nm-diameter hexagonal ZnS nanowires, 1.2 nm-diameter orthorhombic Bi 2 S 3 nanowires and 1.8 nm-diameter orthorhombic Sb 2 S 3 nanowires. As a proof of concept, the ultrathin CuS nanosheets are used to fabricate an electrode for a lithium-ion battery, which exhibits a large capacity and good cycling stability, even after 360 cycles. Furthermore, high-yield, gram-scale production of these ultrathin metal sulphide nanomaterials has been achieved (~100%, without size-sorting process). Our method could be broadly applicable for the high-yield production of novel ultrathin nanostructures with great promise for various applications.
Synthesis and Formation Mechanism of Bi(Se,S) Nanowires Via A Solvothermal Template Process

HL Su,Y Xie,P Gao,H Lu,YJ Xiong,YT Qian

DOI: https://doi.org/10.1246/cl.2000.790

2000-01-01

Chemistry Letters

Abstract:Hexagonal Bi(Se,S) nanowires (20 nm x 1.5 mu m) were prepared for the first time via a mild solvothermal template reaction of BiCl3 with triphenylphosphine sulfide (TPPS) and elemental Se in ethylenediamine (en) at 120 degrees C for 20 h. In this process, the sulfur source TPPS as a template, the solvent ethylenediamine, and reaction temperature were critical factors of forming hexagonal Bi(Se,S) nanowires.
Electrodeposition of Novel Nanostructured Materials Using Mesoporous Silica Thin Films As Templates

QH Shi,HF Yang,Y Cheng,Y Yan,Y Chen,B Tu,DY Zhao

DOI: https://doi.org/10.3321/j.issn:0567-7351.2004.20.010

2004-01-01

Acta Chimica Sinica

Abstract:By using mesoporous silica thin films with different porestructure as templates, employing an electrodeposition method, Cu an ZnO nanostructures were synthesized and characterized respectively. By using hexagonal mesostructured template, metal Cu nanowires with diameter of 7 nm were derived and by using body-centered mesostructured template, Cu nanoparticles with dumbbell-like morphology were obtained. As for the ZnO nanostructures, channels of the silica templates were fully occupied with the semiconductor, and ZnO/SiO2 nanocomposites with different mesostructure were prepared. This approach can he further expended to nanostructures with alternative components, which provided a new method for synthesizing small-sized nanostructures by electrodeposition.
Synthesis of Molybdenum Disulfide Nanowire Arrays Using a Block Copolymer Template

Wei Wei,Leith Samad,Jonathan W. Choi,Yongho Joo,Austin Way,Michael S. Arnold,Song Jin,Padma Gopalan

DOI: https://doi.org/10.1021/acs.chemmater.6b01453

IF: 10.508

2016-05-16

Chemistry of Materials

Abstract:A simple route for the synthesis of arrays of sub-20-nm-wide molybdenum disulfide (MoS2) nanowires using a self-assembled cylinder forming poly(styrene-b-2-vinylpyridine) thin films is demonstrated. The protonated 2-vinylpyridine selectively seeds molybdenum precursors in the aqueous solution, and the precursors are converted to molybdenum sulfide during a sulfur annealing process. An ultraviolet cross-linking step is introduced to ensure the successful transfer of the morphologies of the block copolymer templates to the MoS2 nanowires. The nanowires transition from an amorphous to a crystalline MoS2 phase upon thermal annealing in the presence of sulfur, as confirmed by X-ray photoelectron spectroscopy, Raman spectroscopy, X-ray diffraction, and transmission electron microscopy. This work provides a pathway to large area, dense, spatially localized arrays of transition metal dichalcogenide nanowires for catalytic and sensing applications.

materials science, multidisciplinary,chemistry, physical

Template-Directed Synthesis of Sulfide Semiconductors

Synthesis of Sulfide Nanowire Arrays through Template-Assisted Electrodeposition

The Assembly of Semiconductor Sulfide Nanocrystallites with Organic Reagents As Templates

Synthesis of Hierarchical CuS Flower-Like Submicrospheres Via an Ionic Liquid-Assisted Route

Ordered Nanowire Arrays of Metal Sulfides Templated by Mesoporous Silica SBA-15 via a Simple Impregnation Reaction

Synthesis of ZnS Nanowires in Liquid Crystal Systems

A Synthetic Method for Transition-Metal Chalcogenide Nanocrystals.

Nanoporous arrays of metal sulfides templated by mesoporous silica

Synthesis of ZnS Nanowires by DC Electrodeposition in AAO Template

Nanostructured Lead Sulfide Containing Nanoholes Templated by Lyotropic Hexagonal Liquid Crystals

Synthesis of Sulfides Nanomaterials at Aqueous-Organic Interfaces

Sol-Gel Template Synthesis of an Array of Single Crystal Cds Nanowires on A Porous Alumina Template

Phase-Selective Synthesis and Self-Assembly of Monodisperse Copper Sulfide Nanocrystals

Simultaneous in Situ Formation of ZnS Nanowires in a Liquid Crystal Template by Γ-Irradiation

A TEMPLATE-FREE SOLUTION METHOD BASED ON SOLID-LIQUID INTERFACE REACTION TOWARDS DENDRITIC PbSe NANOSTRUCTURES

Synthesis of Crystalline Mesoporous CdS Semiconductor Nanoarrays Through a Mesoporous SBA‐15 Silica Template Technique

Micelle-template Inducing Synthesis of Winding ZnS Nanowires

A General Method for the Large-Scale Synthesis of Uniform Ultrathin Metal Sulphide Nanocrystals

Synthesis and Formation Mechanism of Bi(Se,S) Nanowires Via A Solvothermal Template Process

Electrodeposition of Novel Nanostructured Materials Using Mesoporous Silica Thin Films As Templates

Synthesis of Molybdenum Disulfide Nanowire Arrays Using a Block Copolymer Template